Help!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 01-19-2003, 04:25 PM

Hop to it before it gets dark and cold. I'm not trying to sound cockey...but your burning day light...esp if we are all right and it is your starter...no $ spent to get it running and top get mom off your back.

Chevy87blazer · 01-19-2003, 04:33 PM

its in my garage right now and i have shop lights in there.

Chevy87blazer · 01-19-2003, 04:48 PM

the engine isnt locked up

Chevy87blazer · 01-19-2003, 05:54 PM

what no one has anymore ideas??

Alexis · 01-19-2003, 06:33 PM

have you taken the starter to get tested?

Chevy87blazer · 01-19-2003, 06:37 PM

no i havent been able to get it off yet

greasemonkey · 01-19-2003, 07:20 PM

Hasn't it been like this for several weeks already?? If I had a dead truck in my garage, I would be out there every time I got the chance....not to criticize you or anything, just take the damn starter off first, if it's not that, you have one thing to check off the list.

TODDS 72 · 01-19-2003, 07:38 PM

Turn the key in the on position,take a jumper wire from big post to small post of starter if it turns over and starts you prolly got a bad conn.or selinod......try hitin starter with a hammer..not a BFH..just a tap tap....if that don't work drop the starter..also on the s10s if you pull the right moter mount bolt jack that side up you can take starter out from top side much more easy..thats all i got less you have some test equ. of your own ......good luck

**68 Stepside** · 01-19-2003, 08:10 PM

do you have power to everything else in the cab of the blazer? does everything else work, but the starter just not engage? Have you checked the neutral safety switch (if it's an automatic)? If it's a stick, are you sure the clutch is fully depressed while turning the key? Can you take a screwdriver and get the starter to engage by jumping the battery terminal to the "s" terminal on the solenoid? Just a few ideas, I haven't been following this too closely...

Chevy87blazer · 01-21-2003, 11:07 AM

i have power to everything but my CD player. The lights work fine everything does but the engine!

Chevy87blazer · 01-21-2003, 03:51 PM

How do i check to see if it is the switch is bad???

greasemonkey · 01-21-2003, 03:56 PM

Where is your CD player wired to? Is the constant power (not sure if this is the right word) wire spliced into the ignition wire?

Chevy87blazer · 01-21-2003, 04:00 PM

uhmmm.... i just use a wiring harness that i bought for my year of blazer... so i didnt have to really mess with any wires

greasemonkey · 01-21-2003, 04:07 PM

Have you used a remote starter switch or just the key?

Chevy87blazer · 01-21-2003, 04:08 PM

just a key

greasemonkey · 01-21-2003, 04:13 PM

One more question (I hope)- do you have power to other things when the key is in the acc or on position, like wipers etc?

DennyB · 01-21-2003, 06:41 PM

Didnt we go through this 2 weeks ago?

Did you try all the things that was suggested?

Have you tested the starter and solenoid?

Take off all the connections and make sure there clean and corrosion free. this includes battery, starter and ground connections.

Chevy87blazer · 01-21-2003, 07:59 PM

yes everything works that worked when it died...

Chevy87blazer · 01-21-2003, 08:00 PM

yeah i checked the connections for all the things and they are good. but i didnt take the starter off to get it tested yet. i will try to do that tomorrow b/c my friend needed to use some of my tools for a couple of days

Chevy87blazer · 01-21-2003, 09:03 PM

alright i put it in neutral and turned the key.. nothing happened at all no click at all!! nothing!! this is really messed up!

79Silv4x4 · 01-21-2003, 10:02 PM

Not a flame, but you've been given sound advice--TAKE THE STARTER OFF AND HAVE IT TESTED! Until then you are wasting your time and everyone elses.

Chevy87blazer · 01-22-2003, 12:28 AM

alright

*Shane* · 01-22-2003, 12:51 AM

... or just let your mom sell it ...

Chevy87blazer · 01-22-2003, 10:16 AM

I dont want her to sell it right now! Maybe if i get it running then she can... hell i want to get rid of it..... but see she wants to see it for like $750 or some BS like that! and i need to make some money off it... people have told me that if i get it in good running order and get the inside detailed taht i could get almost $3000 out of it... but thats if i'm lucky you know?

junkyardjohn · 01-22-2003, 12:07 PM

ARE'T YOU THE SAME KID THAT POSTED THE "I'M BORED" POST?

Bored
need some ideas on what to do at home??? i'm sick and i cant do a whole lot... the chicks are at school so yeah nothing to do...... ideas needed!

I'LL TELL YOU WHAT..... GO OUT & WAIT BY THE MAILBOX..... & I'LL BE RIGHT OVER TO FIX YOUR TRUCK...... I'LL BE THE ONE WITH GULLABLE F@CK TATTOOED ON MY FOREHEAD. LOL

01-19-2003, 04:33 PM	#27
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	its in my garage right now and i have shop lights in there. __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side

01-19-2003, 04:48 PM	#28
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	the engine isnt locked up __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side

01-19-2003, 05:54 PM	#29
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	what no one has anymore ideas?? __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side

01-19-2003, 06:37 PM	#31
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	no i havent been able to get it off yet __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side

01-19-2003, 07:20 PM	#32
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	Hasn't it been like this for several weeks already?? If I had a dead truck in my garage, I would be out there every time I got the chance....not to criticize you or anything, just take the damn starter off first, if it's not that, you have one thing to check off the list. __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

01-19-2003, 04:25 PM	#26
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Hop to it before it gets dark and cold. I'm not trying to sound cockey...but your burning day light...esp if we are all right and it is your starter...no $ spent to get it running and top get mom off your back.

01-19-2003, 06:33 PM	#30
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	have you taken the starter to get tested?

01-19-2003, 07:38 PM	#33
TODDS 72 Not the nightly winner Join Date: Jul 2002 Location: CHARLEMONT MA.USA Posts: 763	Turn the key in the on position,take a jumper wire from big post to small post of starter if it turns over and starts you prolly got a bad conn.or selinod......try hitin starter with a hammer..not a BFH..just a tap tap....if that don't work drop the starter..also on the s10s if you pull the right moter mount bolt jack that side up you can take starter out from top side much more easy..thats all i got less you have some test equ. of your own ......good luck __________________ 72C10SWB BLUE 350/350 86K10LWB BLUE 5.7 700r4 7.5' fisher plow 93S10XCAB4X4 BLUE 4.3 4L60e 69gmc c10 v8 3 on the tree yellow 72k10 swb 350 3 on the tree green 86k15 swb5.0L 4spd brown

01-19-2003, 08:10 PM	#34
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	do you have power to everything else in the cab of the blazer? does everything else work, but the starter just not engage? Have you checked the neutral safety switch (if it's an automatic)? If it's a stick, are you sure the clutch is fully depressed while turning the key? Can you take a screwdriver and get the starter to engage by jumping the battery terminal to the "s" terminal on the solenoid? Just a few ideas, I haven't been following this too closely... __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

01-21-2003, 11:07 AM	#35
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	i have power to everything but my CD player. The lights work fine everything does but the engine! __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side Last edited by Chevy87blazer; 01-21-2003 at 03:50 PM.

01-21-2003, 03:51 PM	#36
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	How do i check to see if it is the switch is bad??? __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side

01-21-2003, 03:56 PM	#37
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	Where is your CD player wired to? Is the constant power (not sure if this is the right word) wire spliced into the ignition wire? __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

01-21-2003, 04:00 PM	#38
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	uhmmm.... i just use a wiring harness that i bought for my year of blazer... so i didnt have to really mess with any wires __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side

01-21-2003, 04:07 PM	#39
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	Have you used a remote starter switch or just the key? __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

01-21-2003, 04:08 PM	#40
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	just a key __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side



Register or Log In To remove these advertisements.

01-21-2003, 04:13 PM	#41
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	One more question (I hope)- do you have power to other things when the key is in the acc or on position, like wipers etc? __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

01-21-2003, 06:41 PM	#42
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Didnt we go through this 2 weeks ago? Did you try all the things that was suggested? Have you tested the starter and solenoid? Take off all the connections and make sure there clean and corrosion free. this includes battery, starter and ground connections. __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

01-21-2003, 07:59 PM	#43
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	yes everything works that worked when it died... __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side

01-21-2003, 08:00 PM	#44
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	yeah i checked the connections for all the things and they are good. but i didnt take the starter off to get it tested yet. i will try to do that tomorrow b/c my friend needed to use some of my tools for a couple of days __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side

01-21-2003, 09:03 PM	#45
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	alright i put it in neutral and turned the key.. nothing happened at all no click at all!! nothing!! this is really messed up!

01-21-2003, 10:02 PM	#46
79Silv4x4 Workaholic Join Date: Oct 2002 Location: Katy, TX Posts: 1,589	Not a flame, but you've been given sound advice--TAKE THE STARTER OFF AND HAVE IT TESTED! Until then you are wasting your time and everyone elses. __________________ 1979 K-10 Silverado (work in progress) 1991 V1500 Subruban 1999 Suburban LT 4x4 2006 Suburban LTZ (daily driver)

01-22-2003, 12:28 AM	#47
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	alright __________________ AIM screen name: Bpd0159 IM me if you want to. Ditch the ***** and lets go mudding!! My lug nuts require more tourqe than your ricer makes Hobbies: Working on cars and trucks, Mudding, Dirt Biking, drag racing, hunting and fishing.... just anything to be out side

01-22-2003, 12:51 AM	#48
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	... or just let your mom sell it ...

01-22-2003, 10:16 AM	#49
Chevy87blazer Registered User Join Date: Jan 2003 Location: Saginaw, MI Posts: 294	I dont want her to sell it right now! Maybe if i get it running then she can... hell i want to get rid of it..... but see she wants to see it for like $750 or some BS like that! and i need to make some money off it... people have told me that if i get it in good running order and get the inside detailed taht i could get almost $3000 out of it... but thats if i'm lucky you know?

01-22-2003, 12:07 PM	#50
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	ARE'T YOU THE SAME KID THAT POSTED THE "I'M BORED" POST? Bored need some ideas on what to do at home??? i'm sick and i cant do a whole lot... the chicks are at school so yeah nothing to do...... ideas needed! I'LL TELL YOU WHAT..... GO OUT & WAIT BY THE MAILBOX..... & I'LL BE RIGHT OVER TO FIX YOUR TRUCK...... I'LL BE THE ONE WITH GULLABLE F@CK TATTOOED ON MY FOREHEAD. LOL __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

Register or Log In To remove these advertisements.