Need help with getting this stupid passenger window installed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

heavy71chevy · 02-29-2008, 06:21 AM

Hi guys and gals..Im having problems getting the used replacement into place inside the door...i got the vent window out that went fine and then i got the old lower frame off the regulator but now i cant get the the new window on the regulaot inside the door...i cant manuver it enough to get it on the rollers...what am i doin wrong here??? help please

Andy4639 · 02-29-2008, 06:57 AM

Did you take the two screws loose on the backside of the door. The ones that hold the channel into the door. They are at the bottom of the door toward the back of the truck. Take those loose and the roller's will go right in place. You may have to work the window regulator also for it to line up.

**LockDoc** · 02-29-2008, 09:50 AM

-
You might find some tips in the FAQ's.

http://67-72chevytrucks.com/vboard/s...d.php?t=262547

scroll down to the door/window section.

LockDoc

heavy71chevy · 03-03-2008, 04:34 PM

ok thanks for the replys yall...got it back together finally...had to man handle the regulator to get it to cooperate with me lol

02-29-2008, 06:21 AM	#1
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Need help with getting this stupid passenger window installed Hi guys and gals..Im having problems getting the used replacement into place inside the door...i got the vent window out that went fine and then i got the old lower frame off the regulator but now i cant get the the new window on the regulaot inside the door...i cant manuver it enough to get it on the rollers...what am i doin wrong here??? help please __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

02-29-2008, 06:57 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Need help with getting this stupid passenger window installed Did you take the two screws loose on the backside of the door. The ones that hold the channel into the door. They are at the bottom of the door toward the back of the truck. Take those loose and the roller's will go right in place. You may have to work the window regulator also for it to line up. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-29-2008, 09:50 AM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,774	Re: Need help with getting this stupid passenger window installed - You might find some tips in the FAQ's. http://67-72chevytrucks.com/vboard/s...d.php?t=262547 scroll down to the door/window section. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-03-2008, 04:34 PM	#4
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: Need help with getting this stupid passenger window installed ok thanks for the replys yall...got it back together finally...had to man handle the regulator to get it to cooperate with me lol __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.