6 Cylinder Club - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2bits · 09-01-2007, 03:12 AM

Thanks for adding the 6 Cylinder Club to the choice of groups!

**Bob B.** · 09-01-2007, 03:28 AM

Straight 6 only, or can I join?!?

Sequoyah · 09-01-2007, 07:39 AM

6 is 6...but yeah, It lists both

*alschevy* · 09-02-2007, 04:05 AM

Well soon i will be puting in a 292 inline six in my truck

1967 chevy one ton wrecker truck

2bits · 09-02-2007, 03:32 PM

You can add it to your list of groups even if you only thought of owning a 6, or used to own a 6 in the past, no restrictions, it's up to you

Mike Massingill · 09-04-2007, 10:28 PM

Count me in.
I am fixing to tear it down and rebuild it.

Does anyone have original pics of a 250 with factory air?
I have brackets but need some pics to see how it works?
I am also looking for a 250 P/S pump and brackets.

Thanks,
Mike

2bits · 09-05-2007, 12:34 AM

The first pic is from a board member with the cleanest engine I have ever seen and the only time I have seen a factory 6 cyl Air conditioning set up. The second pic is all the brackets you will need for the power steering, make sure it is for a 250, and that it is a non integrated head (or integrated if that's what you have).

ThatOneBlue67 · 09-05-2007, 03:03 AM

WOW! That is a beeeeautiful 250! My truck had one, but of course I sold it for the faster V8. Its too bad... I gotta pair of headers sitting in the shed out back for a straight six...

I had a lot trouble finding P/S brackets so I fabbed my own. It looked rediculous, but I never lost a belt

2bits · 09-05-2007, 02:32 PM

Yeah, my A/C bracket is totally home made too, I hope replace it at some point, but for now it is ok. My PS brackets are from an integrated head 250, they work, but I had to replace all my pulleys because the bracket sits just a little bit differently than the correct one.

I looked it up and that clean High Torque 250 is owned by Botietruck here on the board.

gus67 · 09-05-2007, 05:32 PM

Good to be part of a group, 250 three on the tree.!!!!

Luvlegs · 09-05-2007, 05:42 PM

Quote:

Originally Posted by gus67

Good to be part of a group, 250 three on the tree.!!!!

Same with me!

muleys67 · 01-24-2008, 12:01 PM

Hello everybody. I would like to join the 6 cylinder club. I have a 67 chevy
stepside with a 292. What do I have to do to join? Thanks from Muley.

PanelDeland · 01-24-2008, 12:03 PM

Muley, just go to the user CP and you have the option in there.

muleys67 · 01-24-2008, 12:14 PM

Thanks,PanelDeland.I had seen references to the 6 cylinder club,yet had no idea how to find. Thanks again. Muley

2bits · 01-24-2008, 12:34 PM

The clubs are kinda silly in my opinion, only because it's not really a club so it gets confusing. It's basically a name that gets put under your name and avatar showing what you are interests are. Probably should be called something else but the board is way too established to change that probably.

Soooo welcome to the "club"!

rlb67 · 01-24-2008, 12:52 PM

Need a three on the tree club

2bits · 01-24-2008, 02:29 PM

Wow, that's a good one! There wasn't a 6 Cylinder club until recently actually, and there were alot of SIX people out there. I think that's a great idea. Post a new thread with that as a subject line so all the three on the tree people can reply and hopefully he mods will add it too!

southernstyle4028 · 03-06-2008, 07:07 AM

how do i get in the club?

**Palf70Step** · 03-06-2008, 07:12 AM

Have a truck with a 6-cylinder and bring it to my house and leave it.

Just kidding

Go to the top of the page and click on User CP

Once there on the left side near the bottom is an area Mark Miscellaneous, and it has a link for Group Memberships
Click it and select the groups you want to join.

09-01-2007, 03:12 AM	#1
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	6 Cylinder Club Thanks for adding the 6 Cylinder Club to the choice of groups! __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

09-01-2007, 03:28 AM	#2
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,327	Re: 6 Cylinder Club Straight 6 only, or can I join?!? __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

09-01-2007, 07:39 AM	#3
Sequoyah so easy a caveman can do it... Join Date: May 2006 Location: Albuquerque, NM Posts: 419	Re: 6 Cylinder Club 6 is 6...but yeah, It lists both

09-02-2007, 04:05 AM	#4
alschevy Account Suspended Join Date: Jun 2005 Location: Lehigh Acres FL Posts: 205	Re: 6 Cylinder Club Well soon i will be puting in a 292 inline six in my truck 1967 chevy one ton wrecker truck

09-02-2007, 03:32 PM	#5
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: 6 Cylinder Club You can add it to your list of groups even if you only thought of owning a 6, or used to own a 6 in the past, no restrictions, it's up to you __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

09-04-2007, 10:28 PM	#6
Mike Massingill Registered User Join Date: Sep 2006 Location: Houston, TX Posts: 28	Re: 6 Cylinder Club Count me in. I am fixing to tear it down and rebuild it. Does anyone have original pics of a 250 with factory air? I have brackets but need some pics to see how it works? I am also looking for a 250 P/S pump and brackets. Thanks, Mike

09-05-2007, 12:34 AM	#7
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: 6 Cylinder Club The first pic is from a board member with the cleanest engine I have ever seen and the only time I have seen a factory 6 cyl Air conditioning set up. The second pic is all the brackets you will need for the power steering, make sure it is for a 250, and that it is a non integrated head (or integrated if that's what you have). Attached Images __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

09-05-2007, 03:03 AM	#8
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: 6 Cylinder Club WOW! That is a beeeeautiful 250! My truck had one, but of course I sold it for the faster V8. Its too bad... I gotta pair of headers sitting in the shed out back for a straight six... I had a lot trouble finding P/S brackets so I fabbed my own. It looked rediculous, but I never lost a belt __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968.

09-05-2007, 02:32 PM	#9
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: 6 Cylinder Club Yeah, my A/C bracket is totally home made too, I hope replace it at some point, but for now it is ok. My PS brackets are from an integrated head 250, they work, but I had to replace all my pulleys because the bracket sits just a little bit differently than the correct one. I looked it up and that clean High Torque 250 is owned by Botietruck here on the board. __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

09-05-2007, 05:32 PM	#10
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	Re: 6 Cylinder Club Good to be part of a group, 250 three on the tree.!!!!

01-24-2008, 12:01 PM	#12
muleys67 Registered User Join Date: Nov 2006 Location: Roane County,Tennessee Posts: 97	Re: 6 Cylinder Club Hello everybody. I would like to join the 6 cylinder club. I have a 67 chevy stepside with a 292. What do I have to do to join? Thanks from Muley.

01-24-2008, 12:03 PM	#13
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 6 Cylinder Club Muley, just go to the user CP and you have the option in there. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-24-2008, 12:14 PM	#14
muleys67 Registered User Join Date: Nov 2006 Location: Roane County,Tennessee Posts: 97	Re: 6 Cylinder Club Thanks,PanelDeland.I had seen references to the 6 cylinder club,yet had no idea how to find. Thanks again. Muley

01-24-2008, 12:34 PM	#15
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: 6 Cylinder Club The clubs are kinda silly in my opinion, only because it's not really a club so it gets confusing. It's basically a name that gets put under your name and avatar showing what you are interests are. Probably should be called something else but the board is way too established to change that probably. Soooo welcome to the "club"! __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

01-24-2008, 12:52 PM	#16
rlb67 Registered User Join Date: Jan 2008 Location: Brighton, TN Posts: 42	Re: 6 Cylinder Club Need a three on the tree club __________________ Randy, West TN 67 Fleetside SWB L6 3 speed on column 84 Feetside SWB L6 3 speed on column yes, I like column shifts 99 Dodge 4X4 Ext. Cab



Register or Log In To remove these advertisements.

01-24-2008, 02:29 PM	#17
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: 6 Cylinder Club Wow, that's a good one! There wasn't a 6 Cylinder club until recently actually, and there were alot of SIX people out there. I think that's a great idea. Post a new thread with that as a subject line so all the three on the tree people can reply and hopefully he mods will add it too! __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

03-06-2008, 07:07 AM	#18
southernstyle4028 Registered User Join Date: Apr 2007 Location: meansville georgia Posts: 15	Re: 6 Cylinder Club how do i get in the club?

03-06-2008, 07:12 AM	#19
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,845	Re: 6 Cylinder Club Have a truck with a 6-cylinder and bring it to my house and leave it. Just kidding Go to the top of the page and click on User CP Once there on the left side near the bottom is an area Mark Miscellaneous, and it has a link for Group Memberships Click it and select the groups you want to join. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Register or Log In To remove these advertisements.