Shavin door handels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ibad57 · 03-23-2008, 05:42 PM

Im looking for good thread with info on shaving the door handels
need link to silinode required to trip latch how many pounds required?
pics of setup would help a lot
sheetmetal patches to weld in and supplyer
I looked thru Faq: but may have misssed it
we need a sticky on the subject if there is not one there.
thanks for any help on the info

Sammy · 03-23-2008, 06:07 PM

As far as I know there isn't any. My doors are shaved. I have the kit to install. I've heard 20 lb -45 lbs?? Biggest worry is how & where to mount to get a straight pull. S/M patches are on evilbay.

tbags · 03-23-2008, 06:10 PM

Quote:

Originally Posted by ibad57

Im looking for good thread with info on shaving the door handels
need link to silinode required to trip latch how many pounds required?
pics of setup would help a lot
sheetmetal patches to weld in and supplyer
I looked thru Faq: but may have misssed it
we need a sticky on the subject if there is not one there.
thanks for any help on the info

For the filler panels check out www.infantirides.com
and for the actuators check :
http://store.summitracing.com/partde...5&autoview=sku

Sammy · 03-23-2008, 06:30 PM

Presently I use the wing window for entrance. For fear of mounting everything and finding a huge problem. I've rolled the window up & down looking for an idea spot. But not confident. Someone responded told me 6 inches down from the VIN plate using the 8 inches cable extension?? Assuming that as a guide for the place in the door I guess. Just hate to drill holes though the door to find a better spot. Here is a pic of the doors shaved before the truck was on the road. I will monitor any responses you get.

ibad57 · 03-23-2008, 06:37 PM

some ware I found this pic i belive is used to pop door manuelly using the factory key

ibad57 · 03-23-2008, 06:40 PM

also I plan to use the factory interior pull lock rod as a release to open while window is rolled down. and trunk release remote to trigger the relay on drivers door

Sammy · 03-23-2008, 06:44 PM

Another factor to consider is if you go to a one piece window it might disturb the placement too.

Brad · 03-23-2008, 08:58 PM

Anyone ever install this kit? http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us

ibad57 · 03-23-2008, 09:22 PM

Sammy the back of the glass wont change with eather glass the front would .

49studebaker · 03-23-2008, 11:33 PM

Quote:

Originally Posted by Sammy

As far as I know there isn't any. My doors are shaved. I have the kit to install. I've heard 20 lb -45 lbs?? Biggest worry is how & where to mount to get a straight pull. S/M patches are on evilbay.

I wouldn't go less than the 45 pound solenoids. I started with 35 pound on the Stude, they soon burnt up. The company I bought them from "autoloc" later upgraded to a heavier solenoid. The stronger the pull, the longer they will last. A light pull may work fine but heat up more which eventually leads to failure. I currently have a set of 50 pounders that I will be installing. I'm tired of replacing them. It will be the third set I've installed on the same truck.

Sammy · 03-24-2008, 12:51 AM

Hard to think that to trip the latch mech. in the door would take more than 5-10 lbs actual pull strength. I have 40 lb Autoloc's in my kit now, guess thwy will do for starters.

ibad57 · 03-24-2008, 01:45 AM

I belive conecting to the right spot on the latch is the trick
If your siliniod must move lots of linkage it come's at a cost of energy
I would like to see pic's of installed setups on our 67-72 models

Sammy · 03-24-2008, 04:11 AM

Ttt

**Ridgeback** · 03-24-2008, 05:23 AM

I do not know anything about shaving door handles but I recently got two sets of door popper solenoids in a parts deal and they are for sale. If you are interested check the 67-72 parts for sale forum. Thanks.

ibad57 · 03-27-2008, 04:14 PM

Ive checked all post and faq.and no pics or sugestions on silinode placement so I plan on taking pics and posting in the FAQ: when job is compleate
Im sure this has been done to many trucks but we need pic's and sugestions

tommypic · 03-27-2008, 04:33 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=157669 dont know if its in here but its a good post to keep

03-23-2008, 05:42 PM	#1
ibad57 Registered User Join Date: Jan 2007 Location: Owensboro KENTUCKY Posts: 262	Shavin door handels Im looking for good thread with info on shaving the door handels need link to silinode required to trip latch how many pounds required? pics of setup would help a lot sheetmetal patches to weld in and supplyer I looked thru Faq: but may have misssed it we need a sticky on the subject if there is not one there. thanks for any help on the info __________________ My Project Old Glory trike visit here http://www.facebook.com/home.php?#!/...48577705162172

03-23-2008, 06:07 PM	#2
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Shavin door handels As far as I know there isn't any. My doors are shaved. I have the kit to install. I've heard 20 lb -45 lbs?? Biggest worry is how & where to mount to get a straight pull. S/M patches are on evilbay. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

03-23-2008, 06:30 PM	#4
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Shavin door handels Presently I use the wing window for entrance. For fear of mounting everything and finding a huge problem. I've rolled the window up & down looking for an idea spot. But not confident. Someone responded told me 6 inches down from the VIN plate using the 8 inches cable extension?? Assuming that as a guide for the place in the door I guess. Just hate to drill holes though the door to find a better spot. Here is a pic of the doors shaved before the truck was on the road. I will monitor any responses you get. Attached Images __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

03-23-2008, 06:37 PM	#5
ibad57 Registered User Join Date: Jan 2007 Location: Owensboro KENTUCKY Posts: 262	Re: Shavin door handels some ware I found this pic i belive is used to pop door manuelly using the factory key Attached Images __________________ My Project Old Glory trike visit here http://www.facebook.com/home.php?#!/...48577705162172

03-23-2008, 06:40 PM	#6
ibad57 Registered User Join Date: Jan 2007 Location: Owensboro KENTUCKY Posts: 262	Re: Shavin door handels also I plan to use the factory interior pull lock rod as a release to open while window is rolled down. and trunk release remote to trigger the relay on drivers door __________________ My Project Old Glory trike visit here http://www.facebook.com/home.php?#!/...48577705162172

03-23-2008, 06:44 PM	#7
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Shavin door handels Another factor to consider is if you go to a one piece window it might disturb the placement too. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

03-23-2008, 08:58 PM	#8
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: Shavin door handels Anyone ever install this kit? http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

03-23-2008, 09:22 PM	#9
ibad57 Registered User Join Date: Jan 2007 Location: Owensboro KENTUCKY Posts: 262	Re: Shavin door handels Sammy the back of the glass wont change with eather glass the front would . __________________ My Project Old Glory trike visit here http://www.facebook.com/home.php?#!/...48577705162172

03-24-2008, 12:51 AM	#11
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Shavin door handels Hard to think that to trip the latch mech. in the door would take more than 5-10 lbs actual pull strength. I have 40 lb Autoloc's in my kit now, guess thwy will do for starters. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

03-24-2008, 01:45 AM	#12
ibad57 Registered User Join Date: Jan 2007 Location: Owensboro KENTUCKY Posts: 262	Re: Shavin door handels I belive conecting to the right spot on the latch is the trick If your siliniod must move lots of linkage it come's at a cost of energy I would like to see pic's of installed setups on our 67-72 models __________________ My Project Old Glory trike visit here http://www.facebook.com/home.php?#!/...48577705162172

03-24-2008, 04:11 AM	#13
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Shavin door handels Ttt __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

03-24-2008, 05:23 AM	#14
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	Re: Shavin door handels I do not know anything about shaving door handles but I recently got two sets of door popper solenoids in a parts deal and they are for sale. If you are interested check the 67-72 parts for sale forum. Thanks.

03-27-2008, 04:14 PM	#15
ibad57 Registered User Join Date: Jan 2007 Location: Owensboro KENTUCKY Posts: 262	Re: Shavin door handels Ive checked all post and faq.and no pics or sugestions on silinode placement so I plan on taking pics and posting in the FAQ: when job is compleate Im sure this has been done to many trucks but we need pic's and sugestions __________________ My Project Old Glory trike visit here http://www.facebook.com/home.php?#!/...48577705162172

03-27-2008, 04:33 PM	#16
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: Shavin door handels http://67-72chevytrucks.com/vboard/s...d.php?t=157669 dont know if its in here but its a good post to keep



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.