The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-30-2008, 11:18 PM   #1
Mondo
Registered User
 
Mondo's Avatar
 
Join Date: Aug 2007
Location: Bakersfield, Ca
Posts: 538
Fiberglass smooth cowl pics

I just installed this cowl being sold by Tony (mgtp001@gmail.com). It bolted right up and fits nice. He eliminated the 1/2 bolt holes on the upper fenders for a cleaner look (didn't get that pic) and it still fits tight with the remaining bolts/screws. I imagine you could simply drill out if you wanted.
Very pleased
I think the price is around $225 plus shipping.

PS - noticed the 2 holes in upper firewall for the windshield washer spray hoses, seems you could add a row of these for air to get inside the cowl/cab for air A/C..

Next is to shave is the gas cap and side markers... should be simpler with Infiniti's metal templates.
Attached Images
   
Mondo is offline   Reply With Quote
Old 03-30-2008, 11:50 PM   #2
67shortie
Green club
 
67shortie's Avatar
 
Join Date: May 2002
Location: Central CA
Posts: 1,059
Re: Fiberglass smooth cowl pics

That looks to be a great alternative to welding up a metal one

Thanks for sharing man, BTW nice truck looks great
__________________
71 short/fleet ECE 4/6 drop, LQ4/700r4/3.42 gears
70 SS396 Chevelle 427/200-4R/3.73posi
61 Lincoln Continental, black on black

Son you are going to drive me to drinkin if you don't stop drivin that hot rod lincoln
67shortie is offline   Reply With Quote
Old 03-31-2008, 04:27 AM   #3
SchreinerM
Registered User
 
Join Date: Oct 2006
Location: Oshkosh, WI
Posts: 101
Re: Fiberglass smooth cowl pics

Looks nice. I always wondered what a shaved cowl looks like.
SchreinerM is offline   Reply With Quote
Old 03-31-2008, 04:52 AM   #4
ChevLoRay
Old Skool Club
 
ChevLoRay's Avatar
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
Re: Fiberglass smooth cowl pics

You mentioned cutting some holes for the A/C.....won't that defeat the purpose in having a shaved cowl?

I'm gettin' mine shaved and plan to rout the air to the plenum with flex hoses, like my old '56 Merc had for the "Fresh Air" heater system. But not routing outside air to the heat/ac unit will just have it recirculate the air that is heated or cooled, which should make the heating or cooling more efficient by not introducing hot air to an A/C unit, or cold air to a heater. If you need to add fresh air, just crack open a vent window.

My dad had a '59 Ford with a recirculating heater because he was too tight to ante up for the fresh air unit back when it was a new car. When he needed to clear the windows, he opened the vent window or cracked the door windows. It's what I do on my school bus, too.

But I wouldn't cut a hole in a $225 glass cowl.....
__________________
Member Nr. 2770

'96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed.

'69 C-10 SWB; 350/TH400 - in limbo

The older I get, the better I was.
ChevLoRay is offline   Reply With Quote
Old 03-31-2008, 04:59 AM   #5
tcb-1
Nothing to see here.....
 
tcb-1's Avatar
 
Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
Re: Fiberglass smooth cowl pics

me likey, A LOT!!
__________________
Doug

THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten".

The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson
tcb-1 is offline   Reply With Quote
Old 03-31-2008, 06:27 AM   #6
Mondo
Registered User
 
Mondo's Avatar
 
Join Date: Aug 2007
Location: Bakersfield, Ca
Posts: 538
Re: Fiberglass smooth cowl pics

I have Vintage Air so no problems for me.
There was talk of the need to replace the air that comes from the cowl vents. I just saw those two holes and thought it would be an option to add more for those that want a smooth cowl but still want air to come into the cowl.
Mondo is offline   Reply With Quote
Old 03-31-2008, 05:09 PM   #7
duane67c-10
Registered User
 
duane67c-10's Avatar
 
Join Date: Oct 2007
Location: fairview tennessee
Posts: 122
Re: Fiberglass smooth cowl pics

NICE!! I saw one of these on ebay the other night, it looks like it fits good!
duane67c-10 is offline   Reply With Quote
Old 03-31-2008, 07:12 PM   #8
rodstored-72
chevy truck fan
 
rodstored-72's Avatar
 
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 2,008
Re: Fiberglass smooth cowl pics

mondo,
looks great. i was wondering if you get any kind of a warrantee or anything? how did you hear about this guy? i am very interested in this product. does he know about this board or is he a member?? maybe we could get a group together & get a small discount???

i really do like the look! give us more details???

thanks!!
rodstored-72
rodstored-72 is offline   Reply With Quote
Old 03-31-2008, 11:02 PM   #9
baknblk
Registered User
 
baknblk's Avatar
 
Join Date: May 2007
Location: southeastern ky
Posts: 88
Re: Fiberglass smooth cowl pics

I want one for my 84
baknblk is offline   Reply With Quote
Old 03-31-2008, 11:32 PM   #10
LUV2XCLR8
The LuvShack Garage
 
LUV2XCLR8's Avatar
 
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
Re: Fiberglass smooth cowl pics

Awesome, he just finished mine (Totally Shaved - No wipers)
__________________
Owner/Op: "TN Classic Transport Carriers"
The Toy: "Square Vette" 72 Hybrid Blazer
Toy Barn: "LuvShack" 40 x 60 x 20 Shop
Tow Piggy:"Maddy" 88 Silverado 3500
Hauler: "Feathers" 14 Aluma 8218T
LUV2XCLR8 is offline   Reply With Quote
Old 03-31-2008, 11:59 PM   #11
Mondo
Registered User
 
Mondo's Avatar
 
Join Date: Aug 2007
Location: Bakersfield, Ca
Posts: 538
Re: Fiberglass smooth cowl pics

I think he is a member of the board. He's put a lot of work into these, told me he has, like, a dozen metal cowls that he used to make it as accurate as possible (there are very slight differences between stock cowls),
There is no warranty but it seems Tony is trying his best to make a good product and even called me to ask if I was happy with it and any suggestions. If you had a problem I'm sure he'd try to make it right. He's one guy, not part of some big company (hopefully he won't get too swamped with requests and you can get one as quick as I did).
It is fiberglass so you can't just torque down the bolts like metal but it's not necessary to do so. It's pretty thick and not too flimsy.,, For the price, lack of hassle and ease of install it's not a bad deal I think.
Mondo is offline   Reply With Quote
Old 04-01-2008, 04:19 AM   #12
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
Re: Fiberglass smooth cowl pics

Quote:
Originally Posted by Mondo View Post
I think he is a member of the board. He's put a lot of work into these, told me he has, like, a dozen metal cowls that he used to make it as accurate as possible (there are very slight differences between stock cowls),
There is no warranty but it seems Tony is trying his best to make a good product and even called me to ask if I was happy with it and any suggestions. If you had a problem I'm sure he'd try to make it right. He's one guy, not part of some big company (hopefully he won't get too swamped with requests and you can get one as quick as I did).
It is fiberglass so you can't just torque down the bolts like metal but it's not necessary to do so. It's pretty thick and not too flimsy.,, For the price, lack of hassle and ease of install it's not a bad deal I think.
No rust worries either . . .... .
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 04-01-2008, 04:58 AM   #13
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
Re: Fiberglass smooth cowl pics

Quote:
Originally Posted by ChevLoRay View Post
You mentioned cutting some holes for the A/C.....won't that defeat the purpose in having a shaved cowl?

I'm gettin' mine shaved and plan to rout the air to the plenum with flex hoses, like my old '56 Merc had for the "Fresh Air" heater system. But not routing outside air to the heat/ac unit will just have it recirculate the air that is heated or cooled, which should make the heating or cooling more efficient by not introducing hot air to an A/C unit, or cold air to a heater. If you need to add fresh air, just crack open a vent window.

My dad had a '59 Ford with a recirculating heater because he was too tight to ante up for the fresh air unit back when it was a new car. When he needed to clear the windows, he opened the vent window or cracked the door windows. It's what I do on my school bus, too.

But I wouldn't cut a hole in a $225 glass cowl.....
I think you mis-understood what he was saying. I read the post a couple of times & I think he meant put the holes in the firewall not in the cowl panel.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 05-13-2008, 05:08 PM   #14
rodstored-72
chevy truck fan
 
rodstored-72's Avatar
 
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 2,008
Re: Fiberglass smooth cowl pics

i was wondering if anyone else has done this since the first post?? i think that i am going to give it a try. do you guys think that there is a "weight savings" over the stock cowl on this peice?? just a wondering. i wll let you guys know as soon as i make my decision.....
rodstored-72
rodstored-72 is offline   Reply With Quote
Old 05-13-2008, 06:13 PM   #15
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: Fiberglass smooth cowl pics

I'd like to buy one of these. How do get a hold of the gent?

edit: Ok, I saw his email address in the first post... yes I am a goober.

Last edited by FormerMember; 05-13-2008 at 06:15 PM.
FormerMember is offline   Reply With Quote
Old 05-13-2008, 10:09 PM   #16
rodstored-72
chevy truck fan
 
rodstored-72's Avatar
 
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 2,008
Re: Fiberglass smooth cowl pics

That's ok grendel i understand i am the same type of goober! i still wonder if this is a lighter product than the original?? overall i am guessing that to do any type of "body" work on the original ot look anything like this would be more then the price of this plus your original body work plans....
just a thought.

thanks!!
rodstored-72 is offline   Reply With Quote
Old 05-13-2008, 10:47 PM   #17
Premium72
Registered User
 
Premium72's Avatar
 
Join Date: Sep 2005
Location: Villa Rica Ga
Posts: 889
Re: Fiberglass smooth cowl pics

its a clever way to not destroy a perfectly good metal one..looks slick!
Premium72 is offline   Reply With Quote
Old 05-14-2008, 12:40 AM   #18
bigsnookmaster
Registered User
 
bigsnookmaster's Avatar
 
Join Date: Jan 2008
Location: St.Petersburg,Fl
Posts: 1,267
Re: Fiberglass smooth cowl pics

For 225 bucks,The time and labor savings versus welding and fabbing one out of an original.Great deal in my opinion.
bigsnookmaster is offline   Reply With Quote
Old 12-18-2009, 05:05 PM   #19
C20-67_N_MO
Champagne Taste on Beer Budget
 
C20-67_N_MO's Avatar
 
Join Date: Dec 2008
Location: High Ridge, Missouri
Posts: 2,190
Re: Fiberglass smooth cowl pics

Something to consider if he still makes these!
__________________
Coming Soon: Project 1970 Country Truck
C20-67_N_MO is offline   Reply With Quote
Old 12-18-2009, 05:41 PM   #20
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
Re: Fiberglass smooth cowl pics

I've heard some say the fitment was good but others say it wasn't and it's not like you can tweak these like a metal one...just a heads up....
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 12-18-2009, 06:34 PM   #21
68jewel
On the path to financial ruin!
 
68jewel's Avatar
 
Join Date: Jan 2009
Location: Dallas, TX
Posts: 722
Re: Fiberglass smooth cowl pics

I'd rather have the metal one from Tri-Pro. As far as weight savings, it ain't like most of you guys are road racing anyway. So why is a few measly pounds going to matter? And if it did matter, you need to cut weight everywhere else too, i.e, the motor, body panels, rear end, etc.
__________________
'72 Chevelle SS--4.0 Whipple LS7, T56 Magnum, 20X9/20X13 HRE 791R, 6-piston Baer brakes, IRS
'68 SWB C10--LS3, TKO-600, 22x10/22x12 HRE 948R, C5 suspension, shockwaves, custom frame

Ooh Wee's Makeover...http://67-72chevytrucks.com/vboard/s...d.php?t=376280
68jewel is offline   Reply With Quote
Old 08-18-2010, 01:10 PM   #22
piecesparts
Parts and more parts
 
piecesparts's Avatar
 
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
Re: Fiberglass smooth cowl pics

Am I to believe that Tri Pro is closed?
__________________
Frank
piecesparts is offline   Reply With Quote
Old 08-18-2010, 03:17 PM   #23
Mondo
Registered User
 
Mondo's Avatar
 
Join Date: Aug 2007
Location: Bakersfield, Ca
Posts: 538
Re: Fiberglass smooth cowl pics

Here's the end result... over 2 years now, no issues.
Attached Images
   
Mondo is offline   Reply With Quote
Old 08-18-2010, 08:58 PM   #24
piecesparts
Parts and more parts
 
piecesparts's Avatar
 
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
Re: Fiberglass smooth cowl pics

What brand is the cowl on that truck, or did you di it yourself?
__________________
Frank
piecesparts is offline   Reply With Quote
Old 08-19-2010, 04:23 PM   #25
Mondo
Registered User
 
Mondo's Avatar
 
Join Date: Aug 2007
Location: Bakersfield, Ca
Posts: 538
Re: Fiberglass smooth cowl pics

Information is in the first post.

Contact - Tony (mgtp001@gmail.com)
Mondo is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:46 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com