parting out 2 71-72 lwb trucks n w ar. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AH619 · 04-08-2008, 06:35 PM

I Have 2 Long Wheel Base Trucks That I Am Parting Out. They Both Ran When I Drove Them Home. The 1/2 Ton Can Still Be Driven And It Runs Very Strong. 350 4speed. If Anyone Has Needs P M Me And Ill Shoot Some Pics Of Whatever You Want. Well Discuss Price . Thanks. Marvin

PICS.

buffle · 04-08-2008, 07:05 PM

Is either one a leaf spring 5 0n 5 ?

AH619 · 04-08-2008, 07:09 PM

Quote:

Originally Posted by buffle

Is either one a leaf spring 5 0n 5 ?

SORRY 1 IS A 71 1/2 TON CHEVY COIL SPRING WITH DISC. THE OTHER IS A 72 3/4 CHEVY 8 HOLE. THANKS

Bus Ted Knuckle · 04-08-2008, 07:31 PM

Quote:

Originally Posted by AH619

SORRY 1 IS A 71 1/2 TON CHEVY COIL SPRING WITH DISC. THE OTHER IS A 72 3/4 CHEVY 8 HOLE. THANKS

On the 3/4, how much for the rear end with springs (no trailing arms...I have those) and the front crossmember with the Upper and lower a-arms, spindles, steering, springs, etc. (basically the whole complete crossmember)

What kind of shape are these parts in?

I'll come and get them, so no shipping needed.

thanks!
Bill

AH619 · 04-08-2008, 08:00 PM

Quote:

Originally Posted by Bus Ted Knuckle

On the 3/4, how much for the rear end with springs (no trailing arms...I have those) and the front crossmember with the Upper and lower a-arms, spindles, steering, springs, etc. (basically the whole complete crossmember)

What kind of shape are these parts in?

I'll come and get them, so no shipping needed.

thanks!
Bill

IM ASKING 350.00 FOR THE ROLLING CHASSIS OR YOU CAN USE MY TORCH OR TOOLS AND TAKE WHAT YOU NEED. I WOULD NEED A WEEKEND TO PULL ENGINE, TRANS, CAB AND BED. THANKS MARVIN

Bus Ted Knuckle · 04-08-2008, 08:44 PM

Marvin, what kind of shape are the parts in?

AH619 · 04-08-2008, 08:53 PM

Quote:

Originally Posted by Bus Ted Knuckle

Marvin, what kind of shape are the parts in?

BILL WE THOUGHT LONG AND HARD ABOUT REBUILDING THE TRUCK. ALL IT NEEDED WAS THE TRANNY REBUILT TO BE A GOOD RUNNING DRIVER QUALITY. I DROVE IT HOME. BUT WE DECIDED TO USE THE CAB AND WE PULLED THE FRONT CLIP THIS WEEKEND TO GET READY TO PULL THE CAB. I CAN SEND PICS TOMORROW IH YOUL LET ME KNOW WHAT YPUR INTERESTED IN. MARVIN

Bus Ted Knuckle · 04-08-2008, 09:35 PM

Quote:

Originally Posted by AH619

BILL WE THOUGHT LONG AND HARD ABOUT REBUILDING THE TRUCK. ALL IT NEEDED WAS THE TRANNY REBUILT TO BE A GOOD RUNNING DRIVER QUALITY. I DROVE IT HOME. BUT WE DECIDED TO USE THE CAB AND WE PULLED THE FRONT CLIP THIS WEEKEND TO GET READY TO PULL THE CAB. I CAN SEND PICS TOMORROW IH YOUL LET ME KNOW WHAT YPUR INTERESTED IN. MARVIN

Marvin, I am interested in everything to make my 1/2 ton a 3/4 ton. I need the rear end, rear springs, and front crossmember with all steering, and brake parts. I might as well take the whole chassie I suppose, get me some pics when you can.

Thanks!

bryanschevyparts · 04-08-2008, 09:41 PM

i am looking for a headliner trim set up ?

AH619 · 04-08-2008, 10:36 PM

Quote:

Originally Posted by bryanschevyparts

i am looking for a headliner trim set up ?

SORRY THESE WERE CUSTOMS. NO HEADLINERS.

wrapumup · 04-08-2008, 11:05 PM

Hey bill, I am AH619's friend and I can send you a couple pics of the truck as it was whole, let me know your email address. scooty1@hotmail.com
Joe

49m · 04-09-2008, 12:56 AM

What color is the interior

chrislehr · 04-09-2008, 01:52 AM

Either have a black 17" steering wheel in good shape?

What rear ends on them?

AH619 · 04-09-2008, 04:09 AM

Quote:

Originally Posted by 49m

What color is the interior

THE 3/4 TON HAS A GREY SEAT. THE 1/2 TON HAS A RED SEAT 1 RIP. I THINK THERE BOTH OUT OF A LITTLE LATER TRUCKS.

AH619 · 04-09-2008, 04:11 AM

Quote:

Originally Posted by chrislehr

Either have a black 17" steering wheel in good shape?

What rear ends on them?

NO ON THE STEERING WHEELS AND THE REARS ARE NOT POSI. AND IM NOT SHURE WHAT RATIO? I HAVE SEVERAL 5 HOLE REARS NON POSIS. THANKS MARVIN.

Bus Ted Knuckle · 04-09-2008, 03:45 PM

Quote:

Originally Posted by wrapumup

Hey bill, I am AH619's friend and I can send you a couple pics of the truck as it was whole, let me know your email address. scooty1@hotmail.com
Joe

Joe, my email is bill_ritter at msn.com

Thanks!

TotalChevy1 · 04-09-2008, 05:56 PM

Quote:

Originally Posted by AH619

I Have 2 Long Wheel Base Trucks That I Am Parting Out. They Both Ran When I Drove Them Home. The 1/2 Ton Can Still Be Driven And It Runs Very Strong. 350 4speed. If Anyone Has Needs P M Me And Ill Shoot Some Pics Of Whatever You Want. Well Discuss Price . Thanks. Marvin

Any seat belts, have any pics of them

Cyclone44 · 04-09-2008, 06:23 PM

What kind of carb is on the good running 350?? Thanks

AH619 · 04-09-2008, 06:36 PM

Quote:

Originally Posted by TotalChevy1

Any seat belts, have any pics of them

YES THE SEAT BELTS ARE THERE. ILL GET PICS TONITE. THANKS

TotalChevy1 · 04-09-2008, 06:37 PM

Quote:

Originally Posted by AH619

YES THE SEAT BELTS ARE THERE. ILL GET PICS TONITE. THANKS

Thanks

AH619 · 04-09-2008, 06:38 PM

Quote:

Originally Posted by Cyclone44

What kind of carb is on the good running 350?? Thanks

ITS AN EDELBROCK ON AN ALUMINUM INTAKE. THE 3/4 TON HAS A QUADRAJET.

Tynee · 04-09-2008, 06:56 PM

Either one of them have a spare tire carrier that could be useable? What would it cost me to get you to ship that with all its hardware to 40517?

AH619 · 04-09-2008, 07:09 PM

Quote:

Originally Posted by Tynee

Either one of them have a spare tire carrier that could be useable? What would it cost me to get you to ship that with all its hardware to 40517?

NO SPARE TIRE CARRIERS. I HAVE ONE OF THE LONG PIECES THAT GO UNDER THE TIRE BUT NO HARDWARE. SORRY

Cyclone44 · 04-09-2008, 07:10 PM

Quote:

Originally Posted by AH619

ITS AN EDELBROCK ON AN ALUMINUM INTAKE. THE 3/4 TON HAS A QUADRAJET.

The Edlebrock carb is it in good shape? how much if it is shipped to 37918 and the same on the Quadrajet? Thanks

Tynee · 04-09-2008, 07:12 PM

Quote:

Originally Posted by AH619

NO SPARE TIRE CARRIERS. I HAVE ONE OF THE LONG PIECES THAT GO UNDER THE TIRE BUT NO HARDWARE. SORRY

What kind of shape is it in? How much shipped?

04-08-2008, 06:35 PM	#1
AH619 Registered User Join Date: Aug 2006 Location: HARRISON AR. Posts: 309	parting out 2 71-72 lwb trucks n w ar. I Have 2 Long Wheel Base Trucks That I Am Parting Out. They Both Ran When I Drove Them Home. The 1/2 Ton Can Still Be Driven And It Runs Very Strong. 350 4speed. If Anyone Has Needs P M Me And Ill Shoot Some Pics Of Whatever You Want. Well Discuss Price . Thanks. Marvin PICS. __________________ 72 2wd lwb cheyenne super youngest son.green/white 72 2wd lwb cheyenne super oldest son.green/white 71 4wd 3/4 cheyenne super frame off manderin copper / white 4 inch lift. FINALLY DONE / SOLD 72 4WD SWB CHEYENNE BLUE/WHITE 388 AUTO REMEMBER THE COPS NEVER THINK ITS AS FUNNY AS YOU DO. NORWOOD SURVIVOR COPPERTONE BUILD THREAD/ http://www.67-72chevytrucks.com/vboa...d.php?t=259856 Last edited by AH619; 04-10-2008 at 06:44 PM. Reason: ADDED IMAGES

04-08-2008, 07:05 PM	#2
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: parting out 2 71-72 lwb trucks n w ar. Is either one a leaf spring 5 0n 5 ?

04-08-2008, 08:44 PM	#6
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: parting out 2 71-72 lwb trucks n w ar. Marvin, what kind of shape are the parts in? __________________ Bill BEATERS ARE NEATER

04-08-2008, 09:41 PM	#9
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: parting out 2 71-72 lwb trucks n w ar. i am looking for a headliner trim set up ?

04-08-2008, 11:05 PM	#11
wrapumup Junior Member Join Date: Mar 2006 Location: Missouri Posts: 113	Re: parting out 2 71-72 lwb trucks n w ar. Hey bill, I am AH619's friend and I can send you a couple pics of the truck as it was whole, let me know your email address. scooty1@hotmail.com Joe

04-09-2008, 12:56 AM	#12
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: parting out 2 71-72 lwb trucks n w ar. What color is the interior __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

04-09-2008, 01:52 AM	#13
chrislehr Engine n00b Join Date: Feb 2008 Location: Austin Posts: 1,031	Re: parting out 2 71-72 lwb trucks n w ar. Either have a black 17" steering wheel in good shape? What rear ends on them?

04-09-2008, 06:23 PM	#18
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: parting out 2 71-72 lwb trucks n w ar. What kind of carb is on the good running 350?? Thanks

04-09-2008, 06:56 PM	#22
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: parting out 2 71-72 lwb trucks n w ar. Either one of them have a spare tire carrier that could be useable? What would it cost me to get you to ship that with all its hardware to 40517? __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.