3 on the tree shifter rods & z-bar frame bracket f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 04-18-2008, 06:33 AM

shifter rods $25.00 picked up or $35.00 shipped. someone ask me for some of these a while back i hope he sees this tread because i forgot who it was.
the frame z-bar bracket $20.00 shipped.

billsbowtie · 04-19-2008, 06:43 AM

$18.00 shipped on the z-bar bracket.

Mt Man Chad · 04-19-2008, 04:27 PM

Bill do you have any extra shifter rod bushing. (Large inside diameter) like the one shown on the left???

billsbowtie · 04-20-2008, 12:25 AM

chad i don't have any extras.

billsbowtie · 04-22-2008, 02:45 AM

$30.00 shipped on the rods & $15.00 shipped on the frame bracket.

therealcurtis · 05-02-2008, 01:55 AM

is this the z-bar for the clutch or did the shift linkage have a z-bar, or bell-crank, or whatever you want to call it?

billsbowtie · 05-03-2008, 03:07 AM

the realcurtis these are just the shifter rods. i have the z-bar and rod and the part that goes over to the block for $25.00 plus ride.

therealcurtis · 05-04-2008, 12:10 AM

I need everything from the tranny to the collum, including the lever inside the truck. I want to go from an aftermarket floor shifter back to the stock setup that the PO ripped out.

billsbowtie · 05-04-2008, 04:34 AM

is your colum still good? i think i have everything to change it back i will check tomarrow.

**Don Brace** · 05-04-2008, 04:45 AM

Bill
I bought the 3 speed column from you a while back and will take the shift rods. Send me a PM and I will mail the $35.00.
Thanks
Don

therealcurtis · 05-05-2008, 04:31 AM

i think my colum is o.k., not sure how to tell. the spring has some tension and the bushing for the shifter dosen't look too worn.

billsbowtie · 05-05-2008, 04:54 AM

i am in the process of moving and over the next few weeks i will be moving all my parts also. i will keep at eye out for the parts you need you do have a six cyl. right. i am not sure if there is a drifference but the last 2 3 on the tree trucks i took apart were 6 cyl. if you need the parts sooner someone else may see this and be able to help you faster .bill

therealcurtis · 05-08-2008, 04:21 AM

my truck has a 327 v-8, are they different because on a v-8 the rod would need to clear the valve cover or exaust or something. I think the bell housings were the same.

billsbowtie · 05-08-2008, 05:13 AM

i am not sure maybe someone will see this that knows.

**Don Brace** · 05-16-2008, 12:41 AM

Bill
Parts arrived today. Just what I needed.
Thanks
Don

71shortwide · 05-16-2008, 05:02 AM

You wouldnt happen to have every thing from the clutch petal to clutch fork would you ? thanks

Justin

billsbowtie · 05-17-2008, 02:47 AM

justin i am not sure there is a drifference but do you need it for a 6cyl. or v-8 ?bill

billsbowtie · 05-17-2008, 02:49 AM

therealcurtis have you found the parts you need yet?

71shortwide · 05-17-2008, 04:41 AM

its a 6 but i think there the same thanks!

Justin

therealcurtis · 05-18-2008, 08:47 PM

No, I havent found them yet, but i'm not in much of a hurry since i got the floor shifter adjusted I can drive the truck now but have no idea how fast I'm goingsince the shifter sits directly in front of the speedo cable connection on the tranny

Conroe trucker · 05-20-2008, 05:26 AM

I have a 67 6 cyl with a 3 spd nonsynchro first gear. It has the small side cover.

I have replaced it with a 3 spd synchro first gear. It has the big side cover. Actually it is a 3spd OD, but that does not matter for this.

My issue is, do you know if the shift linkage from the column to the shifter shaft link is the same?
The shifter shaft link is different, the nonsynchro has a much longer shaft than the synchro, so I now need the synchro's shift linkage.

I am looking for inlightenment.
Pictures are available if you need them.

Thanks,
Massingill

Mt Man Chad · 05-22-2008, 05:33 AM

I'm interested if they are still for sale..... I just need to confirm the difference between 6 cylinder and V8's. I have a set and they are about 2 inches short of the the steering shaft. I'll post pics and dimensions tomorrow!

**special-K** · 05-23-2008, 04:07 PM

"NOTICE"

Bill`s computer is messed up and he`ll be back by next week.

billsbowtie · 05-24-2008, 11:18 PM

these shifter rods are sold. i have some more somewhere but it will be a while before i can dig them out. i still have some z-bars and clutch rods f/s.

therealcurtis · 05-26-2008, 04:54 AM

BTW... saw in another post from mt man chad that v-8 vs. I-6 rods are different, 6cyl. rods are a couple inches longer. thought you might like to know.

04-18-2008, 06:33 AM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	3 on the tree shifter rods & z-bar frame bracket f/s shifter rods $25.00 picked up or $35.00 shipped. someone ask me for some of these a while back i hope he sees this tread because i forgot who it was. the frame z-bar bracket $20.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

04-19-2008, 06:43 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s $18.00 shipped on the z-bar bracket. __________________ i have 67/72 chevy truck parts f/s.

04-19-2008, 04:27 PM	#3
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: 3 on the tree shifter rods & z-bar frame bracket f/s Bill do you have any extra shifter rod bushing. (Large inside diameter) like the one shown on the left??? Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

04-20-2008, 12:25 AM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s chad i don't have any extras. __________________ i have 67/72 chevy truck parts f/s.

04-22-2008, 02:45 AM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s $30.00 shipped on the rods & $15.00 shipped on the frame bracket. __________________ i have 67/72 chevy truck parts f/s.

05-02-2008, 01:55 AM	#6
therealcurtis Registered User Join Date: Mar 2008 Location: Albany, Ga. Posts: 22	Re: 3 on the tree shifter rods & z-bar frame bracket f/s is this the z-bar for the clutch or did the shift linkage have a z-bar, or bell-crank, or whatever you want to call it? __________________ 68 Chevy LWB stepside (currently hauling $#!* out of my backyard) 94 CVPI R.I.P. was fun until the tranny died, and the brake line rusted thru and the dashboard lights were blinking codes at me. 93 Exploder 09 Scion XB 01 Indian Scout

05-03-2008, 03:07 AM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s the realcurtis these are just the shifter rods. i have the z-bar and rod and the part that goes over to the block for $25.00 plus ride. __________________ i have 67/72 chevy truck parts f/s.

05-04-2008, 12:10 AM	#8
therealcurtis Registered User Join Date: Mar 2008 Location: Albany, Ga. Posts: 22	Re: 3 on the tree shifter rods & z-bar frame bracket f/s I need everything from the tranny to the collum, including the lever inside the truck. I want to go from an aftermarket floor shifter back to the stock setup that the PO ripped out. __________________ 68 Chevy LWB stepside (currently hauling $#!* out of my backyard) 94 CVPI R.I.P. was fun until the tranny died, and the brake line rusted thru and the dashboard lights were blinking codes at me. 93 Exploder 09 Scion XB 01 Indian Scout

05-04-2008, 04:34 AM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s is your colum still good? i think i have everything to change it back i will check tomarrow. __________________ i have 67/72 chevy truck parts f/s.

05-04-2008, 04:45 AM	#10
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: 3 on the tree shifter rods & z-bar frame bracket f/s Bill I bought the 3 speed column from you a while back and will take the shift rods. Send me a PM and I will mail the $35.00. Thanks Don __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

05-05-2008, 04:31 AM	#11
therealcurtis Registered User Join Date: Mar 2008 Location: Albany, Ga. Posts: 22	Re: 3 on the tree shifter rods & z-bar frame bracket f/s i think my colum is o.k., not sure how to tell. the spring has some tension and the bushing for the shifter dosen't look too worn. __________________ 68 Chevy LWB stepside (currently hauling $#!* out of my backyard) 94 CVPI R.I.P. was fun until the tranny died, and the brake line rusted thru and the dashboard lights were blinking codes at me. 93 Exploder 09 Scion XB 01 Indian Scout

05-05-2008, 04:54 AM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s i am in the process of moving and over the next few weeks i will be moving all my parts also. i will keep at eye out for the parts you need you do have a six cyl. right. i am not sure if there is a drifference but the last 2 3 on the tree trucks i took apart were 6 cyl. if you need the parts sooner someone else may see this and be able to help you faster .bill __________________ i have 67/72 chevy truck parts f/s.

05-08-2008, 04:21 AM	#13
therealcurtis Registered User Join Date: Mar 2008 Location: Albany, Ga. Posts: 22	Re: 3 on the tree shifter rods & z-bar frame bracket f/s my truck has a 327 v-8, are they different because on a v-8 the rod would need to clear the valve cover or exaust or something. I think the bell housings were the same. __________________ 68 Chevy LWB stepside (currently hauling $#!* out of my backyard) 94 CVPI R.I.P. was fun until the tranny died, and the brake line rusted thru and the dashboard lights were blinking codes at me. 93 Exploder 09 Scion XB 01 Indian Scout

05-08-2008, 05:13 AM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s i am not sure maybe someone will see this that knows. __________________ i have 67/72 chevy truck parts f/s.

05-16-2008, 12:41 AM	#15
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: 3 on the tree shifter rods & z-bar frame bracket f/s Bill Parts arrived today. Just what I needed. Thanks Don __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.



Register or Log In To remove these advertisements.

05-16-2008, 05:02 AM	#16
71shortwide Registered User Join Date: May 2008 Location: Fayetteville Arkansas Posts: 74	Re: 3 on the tree shifter rods & z-bar frame bracket f/s You wouldnt happen to have every thing from the clutch petal to clutch fork would you ? thanks Justin

05-17-2008, 02:47 AM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s justin i am not sure there is a drifference but do you need it for a 6cyl. or v-8 ?bill __________________ i have 67/72 chevy truck parts f/s.

05-17-2008, 02:49 AM	#18
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s therealcurtis have you found the parts you need yet? __________________ i have 67/72 chevy truck parts f/s.

05-17-2008, 04:41 AM	#19
71shortwide Registered User Join Date: May 2008 Location: Fayetteville Arkansas Posts: 74	Re: 3 on the tree shifter rods & z-bar frame bracket f/s its a 6 but i think there the same thanks! Justin

05-18-2008, 08:47 PM	#20
therealcurtis Registered User Join Date: Mar 2008 Location: Albany, Ga. Posts: 22	Re: 3 on the tree shifter rods & z-bar frame bracket f/s No, I havent found them yet, but i'm not in much of a hurry since i got the floor shifter adjusted I can drive the truck now but have no idea how fast I'm goingsince the shifter sits directly in front of the speedo cable connection on the tranny __________________ 68 Chevy LWB stepside (currently hauling $#!* out of my backyard) 94 CVPI R.I.P. was fun until the tranny died, and the brake line rusted thru and the dashboard lights were blinking codes at me. 93 Exploder 09 Scion XB 01 Indian Scout

05-20-2008, 05:26 AM	#21
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: 3 on the tree shifter rods & z-bar frame bracket f/s I have a 67 6 cyl with a 3 spd nonsynchro first gear. It has the small side cover. I have replaced it with a 3 spd synchro first gear. It has the big side cover. Actually it is a 3spd OD, but that does not matter for this. My issue is, do you know if the shift linkage from the column to the shifter shaft link is the same? The shifter shaft link is different, the nonsynchro has a much longer shaft than the synchro, so I now need the synchro's shift linkage. I am looking for inlightenment. Pictures are available if you need them. Thanks, Massingill __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

05-22-2008, 05:33 AM	#22
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: 3 on the tree shifter rods & z-bar frame bracket f/s I'm interested if they are still for sale..... I just need to confirm the difference between 6 cylinder and V8's. I have a set and they are about 2 inches short of the the steering shaft. I'll post pics and dimensions tomorrow! __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

05-23-2008, 04:07 PM	#23
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 3 on the tree shifter rods & z-bar frame bracket f/s "NOTICE" Bill`s computer is messed up and he`ll be back by next week. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-24-2008, 11:18 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 3 on the tree shifter rods & z-bar frame bracket f/s these shifter rods are sold. i have some more somewhere but it will be a while before i can dig them out. i still have some z-bars and clutch rods f/s. __________________ i have 67/72 chevy truck parts f/s.

05-26-2008, 04:54 AM	#25
therealcurtis Registered User Join Date: Mar 2008 Location: Albany, Ga. Posts: 22	Re: 3 on the tree shifter rods & z-bar frame bracket f/s BTW... saw in another post from mt man chad that v-8 vs. I-6 rods are different, 6cyl. rods are a couple inches longer. thought you might like to know. __________________ 68 Chevy LWB stepside (currently hauling $#!* out of my backyard) 94 CVPI R.I.P. was fun until the tranny died, and the brake line rusted thru and the dashboard lights were blinking codes at me. 93 Exploder 09 Scion XB 01 Indian Scout

Register or Log In To remove these advertisements.