Who likes cab lights?? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 04-19-2008, 03:51 AM

They seal just fine without the raised pads.The same lights were mounted on 73-91 trucks on that contour with no problems.If concerned,dab some quality caulk on the holes before running the screws in.It would take a hard look rom a knowledgeable 69-72 fanatic to even notice if they were factory or not.Can`t say that about any other cab light.The only pictures I have are on work trucks with ladder racks,big mirrors,and all that truck stuff.Nthing off a factory-looking truck with cab lights.

67_C-30 · 04-19-2008, 04:12 AM

Call me a fan!

67_C-30 · 04-19-2008, 04:18 AM

Quote:

Originally Posted by special-K

They seal just fine without the raised pads.The same lights were mounted on 73-91 trucks on that contour with no problems.If concerned,dab some quality caulk on the holes before running the screws in.It would take a hard look rom a knowledgeable 69-72 fanatic to even notice if they were factory or not.Can`t say that about any other cab light.The only pictures I have are on work trucks with ladder racks,big mirrors,and all that truck stuff.Nthing off a factory-looking truck with cab lights.

Here's a set on a non raised cab. They look great to me!

Down south truckin · 04-19-2008, 04:38 AM

Thanks for all the replys I think the one tons have to have them,and I'm about 50/50 on the 3/4 and the 4x4s.I never really thought about the damage and rust issues to the cab.Maybe I'll buy a set and just set them up there for pictures then decide.keep the comments coming

Thanks Mike

killer71 · 04-19-2008, 04:44 AM

dst...they would look gr8 on your truck!

jay_shy · 04-19-2008, 05:30 AM

I kinda like them and agree they do look better on the one tons and larger 4X4's. I am thinking about putting them on my SWB 4X4 and thought about the rust issues. I pulled a set off a mid 1970's that sat in the JY for awhile and did not see any rust. I guess if they were sealed good enough.

Not trying to hijack, but since were on the subjuct of roof markers. Has anyone seen them on a slightly lifted (2"-4") SWB 4X4 or have opinions on weather it would look right or not.

Jason

muscletrucks · 04-19-2008, 05:35 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=287528

Longhorn Man · 04-19-2008, 06:01 AM

one tons were not required to have them.
Trucks sold with daul rear wheel conversion were required to have them.

mahanian · 04-19-2008, 06:07 AM

Quote:

Originally Posted by 67_C-30

Here's a set on a non raised cab. They look great to me!

WOW!!! That truck is GORGEOUS!! I have absolutely no use for a truck like that but I WANT ONE!

Longhorn321 · 04-19-2008, 06:26 AM

I gotta vote no. I'm about 60/40 with the 60 being no but the 40 meaning I do kinda like 'em on the bigger trucks and for saftey reasons....Overall tho, I like the "clean" look better. My .02

67CHIP72 · 04-19-2008, 06:50 AM

I prefer the raised mount type personally. Last year I saw an oxidized Orange Shortbed 4x4 at the Pamona Swapmeet with that type of cab and it looked so cool with the 4" lift. I'm with special-K, in the fact that I think they look better on a K-20 though. Yours would look pretty cool with them. If you cant do it, maybe someone here will photo shop it for you.

Chuck

Pont406 · 04-19-2008, 07:15 AM

My 69 has them. I am still not sure if I will keep them or not.

67CHIP72 · 04-19-2008, 07:26 AM

Quote:

Originally Posted by Pont406

My 69 has them. I am still not sure if I will keep them or not.

My Vote: Keep them!

toomanytoyz · 04-19-2008, 07:52 AM

I picked up this set from the junkyard................

Rick

Longhorn Man · 04-19-2008, 10:12 PM

mine;

http://67-72chevytrucks.com/vboard/s...85#post1768785

Longhorn321 · 04-19-2008, 10:41 PM

Quote:

Originally Posted by toomanytoyz

I picked up this set from the junkyard................

Rick

Hey toomanytoyz....two words....MASKING TAPE!!!

wibilly · 04-20-2008, 05:02 AM

with big mirrors yes with sport mirrors no. but thats just one mans opinion

Down south truckin · 04-20-2008, 06:23 AM

Andy whats the deal with the clear / amber lights?? which is original? where do the others come from?

OK never mind I just saw your old thread someone dug up now I know thanks Mike

Longhorn Man · 04-20-2008, 06:34 AM

the amber round ones were original for 69 and 70 only. They went to a similar styale from 71 - 93 (and on some new Kenworths too)
The clear ones was a discovory i found when a truck came in needing a back up lens at work. Turns out it is also the same as the back up lens for 67 - 72 step sides.
Run to NAPA, and ask for p/n 680-2432 ... should be less than $5 each for the lens only.

cstm68 · 04-20-2008, 06:35 AM

i think they would look great on your truck. i like them on 3/4 tons and 4wd's

69long"n"low · 04-20-2008, 07:18 AM

i like them on big 4x4s and dually quad cabs lowered well any dually for that matter

67cst · 04-23-2008, 06:07 AM

LOL longhorn321

BurnoutNova · 04-23-2008, 11:51 AM

my K10 in my sig has them, it has the raised bumps so i kinda have to keep them, since there already there i like them, but im not sure i would go drilling and cutting holes in a nice cab if they werent already there.

BurnoutNova · 04-23-2008, 11:52 AM

**special-K** · 04-23-2008, 12:50 PM

They became required on trucks over 10,000# GVW.It`s an ICC thing.So any one ton produced after`68(?) had them.Same as with width.I`m not sure how it`s worded,but dual rear trucks,or any truck with a body that`s wider than the cab is required to have lights marking the width.Same as a high body,it`s required to have lights.That`s why they`re called "clearance lamps".

PHOTOSHOP PHOTOSHOP PHOTOSHOP!!!!

04-19-2008, 03:51 AM	#26
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Who likes cab lights?? They seal just fine without the raised pads.The same lights were mounted on 73-91 trucks on that contour with no problems.If concerned,dab some quality caulk on the holes before running the screws in.It would take a hard look rom a knowledgeable 69-72 fanatic to even notice if they were factory or not.Can`t say that about any other cab light.The only pictures I have are on work trucks with ladder racks,big mirrors,and all that truck stuff.Nthing off a factory-looking truck with cab lights. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-19-2008, 04:12 AM	#27
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Who likes cab lights?? Call me a fan! Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

04-19-2008, 04:38 AM	#29
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: Who likes cab lights?? Thanks for all the replys I think the one tons have to have them,and I'm about 50/50 on the 3/4 and the 4x4s.I never really thought about the damage and rust issues to the cab.Maybe I'll buy a set and just set them up there for pictures then decide.keep the comments coming Thanks Mike

04-19-2008, 04:44 AM	#30
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Who likes cab lights?? dst...they would look gr8 on your truck! __________________ R.I.P. Killer 71 10/26/07

04-19-2008, 05:30 AM	#31
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Who likes cab lights?? I kinda like them and agree they do look better on the one tons and larger 4X4's. I am thinking about putting them on my SWB 4X4 and thought about the rust issues. I pulled a set off a mid 1970's that sat in the JY for awhile and did not see any rust. I guess if they were sealed good enough. Not trying to hijack, but since were on the subjuct of roof markers. Has anyone seen them on a slightly lifted (2"-4") SWB 4X4 or have opinions on weather it would look right or not. Jason

04-19-2008, 05:35 AM	#32
muscletrucks Registered User Join Date: Mar 2008 Location: Kansas City Posts: 431	Re: Who likes cab lights?? http://67-72chevytrucks.com/vboard/s...d.php?t=287528 __________________ 1972 GMC Sierra Grande 3/4 Ton 4x4 1970 Mercury Cougar XR7 1943 Farmall M

04-19-2008, 06:01 AM	#33
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Who likes cab lights?? one tons were not required to have them. Trucks sold with daul rear wheel conversion were required to have them.

04-19-2008, 06:26 AM	#35
Longhorn321 Size Matters Join Date: Aug 2007 Location: Lyman, SC Posts: 9,189	Re: Who likes cab lights?? I gotta vote no. I'm about 60/40 with the 60 being no but the 40 meaning I do kinda like 'em on the bigger trucks and for saftey reasons....Overall tho, I like the "clean" look better. My .02 __________________ "Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ...WOOOO HOOOO!!!!

04-19-2008, 06:50 AM	#36
67CHIP72 STOLEN Join Date: Jun 2006 Location: Orange County Posts: 1,022	Re: Who likes cab lights?? I prefer the raised mount type personally. Last year I saw an oxidized Orange Shortbed 4x4 at the Pamona Swapmeet with that type of cab and it looked so cool with the 4" lift. I'm with special-K, in the fact that I think they look better on a K-20 though. Yours would look pretty cool with them. If you cant do it, maybe someone here will photo shop it for you. Chuck __________________ In Search Of

04-19-2008, 07:15 AM	#37
Pont406 Registered User Join Date: Aug 2007 Location: West Hills, California Posts: 679	Re: Who likes cab lights?? My 69 has them. I am still not sure if I will keep them or not. Attached Images

04-19-2008, 07:52 AM	#39
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Who likes cab lights?? I picked up this set from the junkyard................ Rick Attached Images __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

04-19-2008, 10:12 PM	#40
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Who likes cab lights?? mine; http://67-72chevytrucks.com/vboard/s...85#post1768785

04-20-2008, 05:02 AM	#42
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Who likes cab lights?? with big mirrors yes with sport mirrors no. but thats just one mans opinion __________________ common sense isn't so common anymore

04-20-2008, 06:23 AM	#43
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: Who likes cab lights?? Andy whats the deal with the clear / amber lights?? which is original? where do the others come from? OK never mind I just saw your old thread someone dug up now I know thanks Mike Last edited by Down south truckin; 04-20-2008 at 06:26 AM.

04-20-2008, 06:34 AM	#44
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Who likes cab lights?? the amber round ones were original for 69 and 70 only. They went to a similar styale from 71 - 93 (and on some new Kenworths too) The clear ones was a discovory i found when a truck came in needing a back up lens at work. Turns out it is also the same as the back up lens for 67 - 72 step sides. Run to NAPA, and ask for p/n 680-2432 ... should be less than $5 each for the lens only.



Register or Log In To remove these advertisements.

04-20-2008, 06:35 AM	#45
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: Who likes cab lights?? i think they would look great on your truck. i like them on 3/4 tons and 4wd's __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

04-20-2008, 07:18 AM	#46
69long"n"low Registered User Join Date: Jan 2008 Location: SURREY BC, CANADA Posts: 278	Re: Who likes cab lights?? i like them on big 4x4s and dually quad cabs lowered well any dually for that matter

04-23-2008, 06:07 AM	#47
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	Re: Who likes cab lights?? LOL longhorn321 __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

04-23-2008, 11:51 AM	#48
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Who likes cab lights?? my K10 in my sig has them, it has the raised bumps so i kinda have to keep them, since there already there i like them, but im not sure i would go drilling and cutting holes in a nice cab if they werent already there.

04-23-2008, 11:52 AM	#49
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Who likes cab lights??

04-23-2008, 12:50 PM	#50
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Who likes cab lights?? They became required on trucks over 10,000# GVW.It`s an ICC thing.So any one ton produced after`68(?) had them.Same as with width.I`m not sure how it`s worded,but dual rear trucks,or any truck with a body that`s wider than the cab is required to have lights marking the width.Same as a high body,it`s required to have lights.That`s why they`re called "clearance lamps". PHOTOSHOP PHOTOSHOP PHOTOSHOP!!!! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.