![]() |
![]() |
#1 |
Senior Member
![]() Join Date: Apr 2008
Location: Franklinton NC
Posts: 1,309
|
Trans Question
I am trying to decide which direction to go with my daughters 67 c10.It currently is a long step 6cyl with a 3 on the tree.I am defently going to add power brakes(disc) and steering.I am either going to chop or replace the frame and will probably go with an automatic(less distractions for a 16 year old)What I am wondering is will a turbo 350 or 700r4 bolt behind the 6cyl?Sorry no pics yet,this was her great grandfathers truck bought new in 67 and will be a family project till she gets her license(3yrs)
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2005
Location: Northern Arkansas
Posts: 1,136
|
Re: Trans Question
Yes, 6 cyl auto was optional. You'll need an auto trans. crossmember.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,219
|
Re: Trans Question
Yes. It will bolt up. You will have to remove the crossmember under the bell housing & ad one vunder the trans.
|
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Trans Question
Actually, he'll need a cross member, cooler lines, rad with cooler, column and linkages. Possibly a yoke and drive shaft chop, longer speedo cable too.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2007
Location: Blanchard oklahoma
Posts: 95
|
Re: Trans Question
what about the 200r4 would it possibly be a better match and perhaps cheaper?
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Sep 2004
Location: Salisbury
Posts: 40
|
Re: Trans Question
Doing something similar on my 62, 700 better turbo is cheapper and tougher. If she can handle that three she be a better driver later.
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#7 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Trans Question
doing a 200 4R (my preference honestly) would still require all that, but you could use the driveshaft out of a, inline/TH350 truck... not an easy find.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2006
Location: Jonesboro, AR
Posts: 916
|
Re: Trans Question
A 3 on the tree is almost exactly the same length as a TH350. The yoke is the same also. A 200R4 is very close to the same length so with those 2 a driveshaft chop and longer speedo cable may not be necessary on a LWB. Those are about the only 2 things I didn't have to change on my SWB tranny swap.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|