The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-26-2008, 01:29 AM   #26
jgrisafi
Velocity Speed Shop
 
jgrisafi's Avatar
 
Join Date: Jul 2007
Location: Cypress, TX
Posts: 172
Re: New truck build.

I started buying some things that I will need before I start breaking it down. I bought a 1000lb engine stand today, and I also ordered some POR-15 Marine clean/degreaser, chassis coat, and thinner today. Next week I am going to pick up an engine hoist from harbor freight tools. After I get the hoist I will get the transmission and engine out. After the I am going to take the front end apart, then the bed, then work on getting the cab off. After all that is off the chassis I am going to start on it first. It's going to be a busy year, I can't wait!
jgrisafi is offline   Reply With Quote
Old 05-27-2008, 07:27 AM   #27
jgrisafi
Velocity Speed Shop
 
jgrisafi's Avatar
 
Join Date: Jul 2007
Location: Cypress, TX
Posts: 172
Re: New truck build.

Finally!!!!!!! An update on my truck. I have'nt had much time lately to work on it so I finally got out in the garage and worked for almost two days. So...... I got the hood off, the front fenders off, inner front fenders, bumper, radiator, heater box, 90% of the interior, and many exterior engine parts. It's moving slow so far, but what can you expect from a full time Military guy. I have also been collecting parts that i will be installing.
Attached Images
    
__________________

---------------------------------------------------
My Build Thread ..... http://67-72chevytrucks.com/vboard/s...d.php?t=288143

My Garage ..... http://www.hubgarage.com/mygarage/OCD69
jgrisafi is offline   Reply With Quote
Old 05-27-2008, 02:31 PM   #28
sleric77
1967newheartbeat
 
Join Date: Mar 2008
Location: rentz , georgia
Posts: 96
Re: New truck build.

nice truck and I wish you luck on your build .
sleric77 is offline   Reply With Quote
Old 05-27-2008, 03:44 PM   #29
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
Re: New truck build.

Congrats on your new ride ..
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote
Old 05-27-2008, 04:06 PM   #30
caminokid
Chevy nut
 
caminokid's Avatar
 
Join Date: Jun 2007
Location: Springfield, Illinois
Posts: 2,266
Re: New truck build.

The same guy must have owned it as well as mine...2X4's holding the seats in! What are these people thinking when they do this?

Nice score!
__________________
84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II


"Remember kids there is NO replacement for displacement!"
caminokid is offline   Reply With Quote
Old 05-28-2008, 06:12 AM   #31
sswitzke
Registered User
 
sswitzke's Avatar
 
Join Date: Jan 2008
Location: Buffalo, MO
Posts: 589
Re: New truck build.

Nice looking truck keep posting those pics.
sswitzke is offline   Reply With Quote
Old 09-28-2008, 04:38 PM   #32
jgrisafi
Velocity Speed Shop
 
jgrisafi's Avatar
 
Join Date: Jul 2007
Location: Cypress, TX
Posts: 172
Re: New truck build.

I made an attempt at working the headers this weekend......turned out great if I say so myself. I used the VHT 1300 to 2000 degree exhaust and header paints. I used the POR15 degreaser first, then sanded them down real good, degreased them again, primed them with the VHT primer, then shot them with the VHT aluminum color, then applied a clear coat from VHT as well. They look great in person, and I hope it lasts for awhile. You can tell which one is in primer and which one is cleared.
Attached Images
     
__________________

---------------------------------------------------
My Build Thread ..... http://67-72chevytrucks.com/vboard/s...d.php?t=288143

My Garage ..... http://www.hubgarage.com/mygarage/OCD69
jgrisafi is offline   Reply With Quote
Old 04-18-2009, 05:24 AM   #33
meansting04
Registered User
 
meansting04's Avatar
 
Join Date: Aug 2008
Location: travis afb
Posts: 304
Re: New truck build.

sweet findon the truck, digg the rear bumper
__________________
67 gmc 1/2 ton, 5.0 v6, 4 speed SOLD!!
70 Chevy C-10, 355, th400, 3.73's 2/4 drop
meansting04 is offline   Reply With Quote
Old 04-18-2009, 10:16 AM   #34
chas350
Registered User
 
Join Date: Mar 2007
Location: Connecticut
Posts: 581
Re: New truck build.

Great project!
I would be afraid to use the torch or grinder in a shop like that, to nice!

chas
__________________
"I'll Procrastinate Tomorrow"
quote by LEEVON


71 K10 long fleet (sons truck) new 370hp 355, sm465 np205, 3.73's 33's
70 K20 long fleet
98 G3500 work van
chas350 is offline   Reply With Quote
Old 05-12-2009, 09:43 PM   #35
72 SHORTBED 7.0
Registered User
 
72 SHORTBED 7.0's Avatar
 
Join Date: Nov 2007
Location: dallas Tx in front of you
Posts: 182
Re: New truck build.

LOL I have the same wheels Good luck
72 SHORTBED 7.0 is offline   Reply With Quote
Old 05-12-2009, 10:00 PM   #36
greygoose
Registered User
 
greygoose's Avatar
 
Join Date: Mar 2008
Location: N.C.
Posts: 250
Re: New truck build.

from the pics it looks like there's really not a whole lot that you have to do...good luck with it.
__________________
If it ain't a chevy,I don't want it
greygoose is offline   Reply With Quote
Old 05-12-2009, 10:51 PM   #37
ej69c10
Registered User
 
ej69c10's Avatar
 
Join Date: May 2009
Location: Pace, FL
Posts: 28
Re: New truck build.

awsome looking truck and those headers look good for some spray paint. good luck and stick with it
ej69c10 is offline   Reply With Quote
Old 07-27-2009, 10:39 PM   #38
jgrisafi
Velocity Speed Shop
 
jgrisafi's Avatar
 
Join Date: Jul 2007
Location: Cypress, TX
Posts: 172
Re: New truck build.

Well, I got a few things done last weekend. It's slow going so far. The next step is to get the front and rear suspension parts off. Then I will get the frame down to bare metal and paint it with POR-15. While I was deployed I started buying a bunch of parts, so as soon as I get the frame painted I will be putting on the new parts. I'll keep yall updated. It's going to look killer, the frame will be painted silver.
Attached Images
     
__________________

---------------------------------------------------
My Build Thread ..... http://67-72chevytrucks.com/vboard/s...d.php?t=288143

My Garage ..... http://www.hubgarage.com/mygarage/OCD69
jgrisafi is offline   Reply With Quote
Old 07-27-2009, 11:17 PM   #39
Dynomutt
Registered User
 
Dynomutt's Avatar
 
Join Date: Mar 2009
Location: North Texas
Posts: 440
Re: New truck build.

You're certainly not wasting any time. Lookin good. I'm just about the same place you are. I just need to get my cab off the frame.
__________________
MARQ

Build Thread

http://67-72chevytrucks.com/vboard/s...d.php?t=446194
Dynomutt is offline   Reply With Quote
Old 07-27-2009, 11:39 PM   #40
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
Re: New truck build.

Looks good. Nice Progress. Mine will be to that point soon.
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 07-30-2009, 07:16 PM   #41
72 SHORTBED 7.0
Registered User
 
72 SHORTBED 7.0's Avatar
 
Join Date: Nov 2007
Location: dallas Tx in front of you
Posts: 182
Re: New truck build.

Your Quick any up dates ..
72 SHORTBED 7.0 is offline   Reply With Quote
Old 08-21-2009, 05:57 PM   #42
jgrisafi
Velocity Speed Shop
 
jgrisafi's Avatar
 
Join Date: Jul 2007
Location: Cypress, TX
Posts: 172
Re: New truck build.

I have some updates for yall. I have been working on the frame getting it ready for the c-notch then some paint. I made room to relocate the gas tank from in the cab to under the bed and also took off the rear bumpstop brackets to mount the c-nothes. Here yall go:
Attached Images
     
__________________

---------------------------------------------------
My Build Thread ..... http://67-72chevytrucks.com/vboard/s...d.php?t=288143

My Garage ..... http://www.hubgarage.com/mygarage/OCD69
jgrisafi is offline   Reply With Quote
Old 08-21-2009, 06:10 PM   #43
bigbadjohn84
Registered User
 
Join Date: Feb 2008
Location: Florala, AL
Posts: 398
Re: New truck build.

sweet!! wish my 71 was in near that good of shape when I started! I'd be daily driven by now
bigbadjohn84 is offline   Reply With Quote
Old 08-21-2009, 06:19 PM   #44
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 20,031
Re: New truck build.

POR 15 is the way to go as far as your paint choice, you will not be disappointed. They also make POR 20, which is high temp exhaust/header paint, and will hold up a lot better than VHT.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
RIP FleetsidePaul
leddzepp is offline   Reply With Quote
Old 08-21-2009, 10:53 PM   #45
57NAPCO
F’B’D guy
 
57NAPCO's Avatar
 
Join Date: Feb 2004
Location: Texas/Maine
Posts: 2,234
Re: New truck build.

nice project, that I'll keep ya busy for awhile.

We lived near Grant and Steinhagen for years, lived on 55 acres.....I loved it.
57NAPCO is offline   Reply With Quote
Old 10-08-2009, 12:53 AM   #46
jgrisafi
Velocity Speed Shop
 
jgrisafi's Avatar
 
Join Date: Jul 2007
Location: Cypress, TX
Posts: 172
The frame is painted!!!

I haven't been on in a while so I thought that I would post some pictures of what I have been up too. I finally got the whole frame and suspension apart, which took me forever. The hardest part about doing this while trying to save some money was getting the frame down to bare metal. Which by the way I DON'T RECOMMEND doing the old fashioned way. I went through a bunch of flap discs and wire wheels for my grinder. I used a paint that is like POR-15, it's called Bill Hirsch miracle paint. It cost $30 a quart, I only spayed on 2 quarts. Anyway, I think it turned out real good.
Attached Images
    
__________________

---------------------------------------------------
My Build Thread ..... http://67-72chevytrucks.com/vboard/s...d.php?t=288143

My Garage ..... http://www.hubgarage.com/mygarage/OCD69
jgrisafi is offline   Reply With Quote
Old 10-08-2009, 12:57 AM   #47
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
Re: New truck build.

Looks great!
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 10-08-2009, 11:57 AM   #48
Conroe trucker
SWBs: 67 2x4, 67 4x4, 70 4x4
 
Join Date: Nov 2007
Location: Conroe, TX
Posts: 483
Re: New truck build.

Don't mean to high jack the thread, but with the Conroe swap meet later this month, maybe we should all get together and meet in Conroe.

I have a shop in Conroe, about 4-5 miles from the swap meet, and we can use it for a base.

It also has a secured parking lot and such.

Swap meet is the 29-31st.

Mike
__________________
FINISHED Project thread: 67 SWB 4x4
FINISHED Project thread: 67 SWB 6 cyl cruiser
Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT
01 C5 convertable
08 Z06
Conroe trucker is offline   Reply With Quote
Old 10-08-2009, 12:41 PM   #49
DZL1
One day.....
 
DZL1's Avatar
 
Join Date: Aug 2008
Location: Ocala, FL.
Posts: 702
Re: New truck build.

Looks awesome! Does that paint come in different colors?

DZL1.

I googled it. Seems that in comes in silver, black, and clear.

Last edited by DZL1; 10-08-2009 at 12:43 PM.
DZL1 is offline   Reply With Quote
Old 10-08-2009, 11:14 PM   #50
unclewatts
70 Chevrolet=Obsession
 
unclewatts's Avatar
 
Join Date: Jun 2009
Location: nice ca
Posts: 1,067
Re: New truck build.

I like the seats and door panels but ya gotta replace that top radiator hose!
__________________


I'm Just like my truck. Old, Ugly and Grouchy. Except my truck starts easily in the morning and doesn't smoke!

IT'S NOT EASY BEING GREEN! -Kermit the frog

1970 Chevrolet C-10 Longbed Stepside :
350, Muncie M20, 3.08 GM corp. positraction Forest green exterior/light green interior(Where all my money goes)

1996 Toyota Corolla (Parts runner)
unclewatts is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com