F/S polished aluminum raidiator, w/tranny cooler - The 1947 - Present Chevrolet & GMC Truck Message Board Network

byrd · 04-30-2008, 02:33 AM

I have a brand new polished aluminum radiator for sale. It is a 2 core, but the cores are HUGE and it is the same size as the 4 core radiators for our trucks. I bought the radiator under the impresion it was for our trucks, but Andy Longhornman pointed out the lower hose spout comes straight out versus angling up away from the frame rail. I do not know if it will fit in the stock location, but I figure one of you custom frame guys would like a smoking deal on a sweet polished aluminum radiator. I was told the brand name is Griffen by the cat I got this from off ebay. I didn't realize when I bought it, it was the size of a 4 core and it will be WAY TOO MUCH radiator for my truck. It has the built in tranny cooler and it is the full length cooler and should be great for a big block with overdrive tranny. There are a cuple of fins pushed around(like about 4 or 5) and there are some small scuffs on the filler side of the polished tanks. Looks like just black rub marks and should come off, either way they will not be seen whenin stalled. I have $350 in the radiator and and looking to get that out of it. This radiator sells new for over $700, get a smokin deal here half off retail. Shipping is not included and should be around $25-30 anywhere in the lower 48.

Please respond here NO PM's they will be ignored!

Thanks,
Randy

byrd · 04-30-2008, 02:34 AM

more pics

**jaros44sr** · 04-30-2008, 02:48 AM

I'll give 350, if you pay for shipping....J. Is it the rite size for our trucks?

jorgensensc · 04-30-2008, 02:52 AM

I really wished I needed an aluminum radiator!! That thing looks great!!
Shawn

byrd · 04-30-2008, 03:03 AM

Quote:

Originally Posted by jaros44sr

I'll give 350, if you pay for shipping....J. Is it the rite size for our trucks?

J,
It is the right size, but the the lower hose bung or spout whatever you call it is pointing straight out and may interfere with the frame rails or so I was told by Andy(longhornman)???

**jaros44sr** · 04-30-2008, 03:40 AM

Quote:

Originally Posted by byrd

J,
It is the right size, but the the lower hose bung or spout whatever you call it is pointing straight out and may interfere with the frame rails or so I was told by Andy(longhornman)???

Well it seems mine is doing the same thing, didn't know it was supposed to aim away from the frame. I bought a flexible metal hose to keep it up away from the frame, seems to work...J.
It looks close but it is not

byrd · 04-30-2008, 03:49 AM

J,
If you want it the $350 will be fine, paypal or US postal MO. and I will ship it ups ground.

**jaros44sr** · 04-30-2008, 04:25 AM

Quote:

Originally Posted by byrd

J,
If you want it the $350 will be fine, paypal or US postal MO. and I will ship it ups ground.

I lost my pension check around the house

, but I can send off a 300 PMO tomorrow. Should'nt be but a couple days for the balance

byrd · 04-30-2008, 04:28 AM

PM sent

byrd · 04-30-2008, 04:41 AM

Sold pending payment from Jaros44sr

Longhorn Man · 04-30-2008, 05:34 AM

I wish i coulda chimed in sooner... but this sucker is sweet lookin, the photos don't do it justice.
And that is a screaming deal.

**jaros44sr** · 05-01-2008, 12:17 AM

Thanks Randy for the sweet deal...Sold it, Sold it, Sold it

PMO should be there soon....J.

byrd · 05-01-2008, 04:18 AM

Thanks, I will get the rad ready to ship and will be looking for the MO...

Thanks again,
Randy

04-30-2008, 02:48 AM	#3
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: F/S polished aluminum raidiator, w/tranny cooler I'll give 350, if you pay for shipping....J. Is it the rite size for our trucks? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 04-30-2008 at 02:49 AM.

04-30-2008, 02:52 AM	#4
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: F/S polished aluminum raidiator, w/tranny cooler I really wished I needed an aluminum radiator!! That thing looks great!! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

04-30-2008, 05:34 AM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: F/S polished aluminum raidiator, w/tranny cooler I wish i coulda chimed in sooner... but this sucker is sweet lookin, the photos don't do it justice. And that is a screaming deal.

05-01-2008, 12:17 AM	#12
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: F/S polished aluminum raidiator, w/tranny cooler Thanks Randy for the sweet deal...Sold it, Sold it, Sold it PMO should be there soon....J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.