check out my new project k-20 body swap - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71blksuper4x4** · 04-30-2008, 07:57 AM

sweet wheel, looks just like the one I got done restoring for my Super.

Down south truckin · 05-12-2008, 09:18 AM

Yeah!!!

I got my project running and driving! It runs pretty good and stops pretty good It's got rear discs and I was/am skeptical about stuff like that.Now one day this week I can take it and get my 2 flowmasters and some exhaust ran so it won't sound like a "pulpwood truck" anymore.and I can get after it with some rubbing compound and wax.Thanks Mike

Bishops Trucks · 05-12-2008, 09:32 AM

Great job. Turned out real nice.

68,69 K20 · 05-12-2008, 04:02 PM

Real sweet Mike... Are you going to go with mouldings on this one?

Down south truckin · 05-12-2008, 07:34 PM

Quote:

Originally Posted by 68,69 K20

Real sweet Mike... Are you going to go with mouldings on this one?

I've got a set of the reproduction wood grain mouldings that I bought for a previous project that got traded off.After I get it rubbed back to a shine I'll put the new mouldings on it.Thanks Mike

Down south truckin · 05-18-2008, 06:21 AM

I got the exhaust ran on it this week the gentleman who did it did me a great job ran it above the crossmember so you can't even see it from the side.He also installed a crossover pipe and some turn downs just past the rear axle.The two chamber flowmasters sound good even though it is kinda quiet.I also got the seat cover from Frank (PICKMUP) Now I just need to find a good seat to cover,and get the elbow grease out and polish the paint

msgross · 05-18-2008, 06:35 AM

looks good, I like the stock look

you could always put in an add-a-leaf or xero rate spring in the back to raise it an inch or two....

og350 · 05-18-2008, 08:34 AM

hey can you take some pictures of the exhaust? i just got done putting headers on my truck and want to figuure out the pest path to run the pipes! thanks and great looking truck!! oh and mine sits lower in back and i have a 4 inch skyjacker kit.

Down south truckin · 05-22-2008, 05:42 AM

WHOO-HOO I got my seat covered today as well as 2 coats of rubbing/polishing compound then followed by a coat of turtle wax and it cleaned up pretty good now I got to get the moulding on and the seat in.This is the only good thing about being slow at work.Thanks,DST

Down south truckin · 05-22-2008, 05:44 AM

Here are a few pictures of the exhaust...DST

Quote:

Originally Posted by og350

hey can you take some pictures of the exhaust? i just got done putting headers on my truck and want to figuure out the pest path to run the pipes! thanks and great looking truck!! oh and mine sits lower in back and i have a 4 inch skyjacker kit.

**Joesjunk** · 05-22-2008, 06:00 AM

That truck sure looks good!!! Cant wait to see it with the trim on it!!

og350 · 05-28-2008, 05:35 AM

well i found a very nice 4x4 frame if someone wants to come up north here and get it and make another k20....
http://minneapolis.craigslist.org/pts/696193505.html

dst what are you running for a t case and shifter? i have a 79 np203 that i put in my 71 k20 but and having a problem with the sifter hiting the trans hump so i will have to do some altering to the shifter.

Down south truckin · 05-29-2008, 09:04 AM

Quote:

Originally Posted by og350

well i found a very nice 4x4 frame if someone wants to come up north here and get it and make another k20....
http://minneapolis.craigslist.org/pts/696193505.html

dst what are you running for a t case and shifter? i have a 79 np203 that i put in my 71 k20 but and having a problem with the sifter hiting the trans hump so i will have to do some altering to the shifter.

This truck has the factory 71-72 np205 transfer case and shifter

msgross · 05-31-2008, 04:22 PM

any video of how that exhaust sounds?

Down south truckin · 06-02-2008, 09:51 PM

msgross, That's a good idea my camera does video but I've never tried to attach them to a forumn.Any body have any tips on the easiest way to do it? Here are some shots of the Bronze and white truck this weekend at super chevy

Down south truckin · 06-02-2008, 10:13 PM

These pics are after adding 1" lift blocks on the rear and adding all the woodgrain mouldings.I have never really been a big fan of the bronze color but to me this truck just clicks and looks great!

og350 · 06-02-2008, 10:47 PM

hey dst what did you use for the block? i was looking at the ord and like the idea of shifting the wheels back. the truck looks great and the color fits it well!!

Down south truckin · 06-02-2008, 10:59 PM

Quote:

Originally Posted by og350

hey dst what did you use for the block? i was looking at the ord and like the idea of shifting the wheels back. the truck looks great and the color fits it well!!

A friend of mine had some 1" lift blocks laying around.we tried some 1/2 thick ones but you couldn't hardly tell.Knowing him he made them himself....DST

72-c20 · 06-02-2008, 11:27 PM

Quote:

Originally Posted by Down south truckin

I'm stuck on the hubcap/white wheel deal I may try to find a set of 16.5s to put on the slots and alternate back and forth thanks Mike

love those 5 slots! I need to find something like that for when my 33x12.50x15s wear out, and go with a narrower tire/wheel combo.

468BIGBLOCK · 08-26-2008, 09:21 PM

any progress lately,looks great!!

Down south truckin · 08-26-2008, 09:33 PM

No progress just sitting around waiting on cooler weather and hunting season maybe it will get some miles put on it once it cools down.

HOTFUN · 08-26-2008, 09:40 PM

Mike
Good time then to be looking over the data books so maybe I can be pouring over them someday.... Still would like to get one. I really like the bronze color and it looks great on that K20. Mark

04-30-2008, 07:57 AM	#51
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: check out my new project k-20 body swap sweet wheel, looks just like the one I got done restoring for my Super. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-12-2008, 09:18 AM	#52
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: check out my new project k-20 body swap Yeah!!!I got my project running and driving! It runs pretty good and stops pretty good It's got rear discs and I was/am skeptical about stuff like that.Now one day this week I can take it and get my 2 flowmasters and some exhaust ran so it won't sound like a "pulpwood truck" anymore.and I can get after it with some rubbing compound and wax.Thanks Mike Attached Images

05-12-2008, 09:32 AM	#53
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: check out my new project k-20 body swap Great job. Turned out real nice. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

05-12-2008, 04:02 PM	#54
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: check out my new project k-20 body swap Real sweet Mike... Are you going to go with mouldings on this one? __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

05-18-2008, 06:21 AM	#56
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: check out my new project k-20 body swap I got the exhaust ran on it this week the gentleman who did it did me a great job ran it above the crossmember so you can't even see it from the side.He also installed a crossover pipe and some turn downs just past the rear axle.The two chamber flowmasters sound good even though it is kinda quiet.I also got the seat cover from Frank (PICKMUP) Now I just need to find a good seat to cover,and get the elbow grease out and polish the paint

05-18-2008, 06:35 AM	#57
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: check out my new project k-20 body swap looks good, I like the stock look you could always put in an add-a-leaf or xero rate spring in the back to raise it an inch or two.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

05-18-2008, 08:34 AM	#58
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: check out my new project k-20 body swap hey can you take some pictures of the exhaust? i just got done putting headers on my truck and want to figuure out the pest path to run the pipes! thanks and great looking truck!! oh and mine sits lower in back and i have a 4 inch skyjacker kit.

05-22-2008, 05:42 AM	#59
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: check out my new project k-20 body swap WHOO-HOO I got my seat covered today as well as 2 coats of rubbing/polishing compound then followed by a coat of turtle wax and it cleaned up pretty good now I got to get the moulding on and the seat in.This is the only good thing about being slow at work.Thanks,DST Attached Images

05-22-2008, 06:00 AM	#61
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,702	Re: check out my new project k-20 body swap That truck sure looks good!!! Cant wait to see it with the trim on it!! __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

05-28-2008, 05:35 AM	#62
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: check out my new project k-20 body swap well i found a very nice 4x4 frame if someone wants to come up north here and get it and make another k20.... http://minneapolis.craigslist.org/pts/696193505.html dst what are you running for a t case and shifter? i have a 79 np203 that i put in my 71 k20 but and having a problem with the sifter hiting the trans hump so i will have to do some altering to the shifter.

05-31-2008, 04:22 PM	#64
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: check out my new project k-20 body swap any video of how that exhaust sounds? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

06-02-2008, 09:51 PM	#65
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: check out my new project k-20 body swap msgross, That's a good idea my camera does video but I've never tried to attach them to a forumn.Any body have any tips on the easiest way to do it? Here are some shots of the Bronze and white truck this weekend at super chevy Attached Images

06-02-2008, 10:13 PM	#66
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: check out my new project k-20 body swap These pics are after adding 1" lift blocks on the rear and adding all the woodgrain mouldings.I have never really been a big fan of the bronze color but to me this truck just clicks and looks great!

06-02-2008, 10:47 PM	#67
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: check out my new project k-20 body swap hey dst what did you use for the block? i was looking at the ord and like the idea of shifting the wheels back. the truck looks great and the color fits it well!!

08-26-2008, 09:21 PM	#70
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: check out my new project k-20 body swap any progress lately,looks great!! __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..



Register or Log In To remove these advertisements.

08-26-2008, 09:33 PM	#71
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: check out my new project k-20 body swap No progress just sitting around waiting on cooler weather and hunting season maybe it will get some miles put on it once it cools down.

08-26-2008, 09:40 PM	#72
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: check out my new project k-20 body swap Mike Good time then to be looking over the data books so maybe I can be pouring over them someday.... Still would like to get one. I really like the bronze color and it looks great on that K20. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" Last edited by HOTFUN; 08-27-2008 at 11:39 PM.

Register or Log In To remove these advertisements.