Are 60-66 Stepper Bedside's same as 67-72? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toomanytoyz · 04-30-2008, 09:56 PM

Need to Replace the Bedside's on my 67 Stepper I just Got, I have a Lead on a 60-66 Bed in my Area & wanted to know about Possible interchange on Them?

Any Help would be Greatly Appreciated, This issue is a Big Hold Up in Getting the Truck Finished.

Thanks, Rick

krazy_texan · 04-30-2008, 11:18 PM

i am pretty sure they are not exactly the same but some jo blo on the the street wouldnt be able to tell the difference i think where the difference is is the top where it rolls over for the top of the bedsides and also the bolt holes for the fenders themselves but thats a given other than that i dont know any more and am not 100% sure about it

**special-K** · 04-30-2008, 11:54 PM

Yes,I mean no.Everything but the fender mounting,AFAIK.

67ChevyRedneck · 05-01-2008, 12:11 AM

I know on the 73-87 beds the front area where the steps mount are different (you need to weld the lower portion of the 67-72 bed where the step bolts up to the 73-87 beds)... are they different on the 55-66 beds as well???? For some reason... I'm thinking they're the same??? But if it's a super nice bed, it may be worth filling some holes and doing some welding work?

**special-K** · 05-01-2008, 05:04 AM

60-66 have nearly the same steps.Thet don`t tie into the front stancions like`73-ups.

Richard8971 · 05-01-2008, 05:08 AM

Rick the bedsides, front panel and tailgate are the same up to '87. I believe the only change was the fenders and the step.

D

toomanytoyz · 05-01-2008, 05:16 AM

Thanks for the Info, I just need to get a Bed for the Truck so i can get on with it & Complete it. Been going on so long now I'm Getting Depressed by it................

Thanks, Rick

*Shane* · 05-01-2008, 05:43 AM

Richard is correct ... same all the way up thru 1987 ... although some of the fender mounting holes are different on the later years ... can't say for 60-66

bowtieboy93 · 05-01-2008, 07:00 AM

55-66 had the same fenders

all the fender mounting holes are different than 67-72

04-30-2008, 09:56 PM	#1
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Are 60-66 Stepper Bedside's same as 67-72? Need to Replace the Bedside's on my 67 Stepper I just Got, I have a Lead on a 60-66 Bed in my Area & wanted to know about Possible interchange on Them? Any Help would be Greatly Appreciated, This issue is a Big Hold Up in Getting the Truck Finished. Thanks, Rick Attached Images __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

04-30-2008, 11:18 PM	#2
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	Re: Are 60-66 Stepper Bedside's same as 67-72? i am pretty sure they are not exactly the same but some jo blo on the the street wouldnt be able to tell the difference i think where the difference is is the top where it rolls over for the top of the bedsides and also the bolt holes for the fenders themselves but thats a given other than that i dont know any more and am not 100% sure about it __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

04-30-2008, 11:54 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Are 60-66 Stepper Bedside's same as 67-72? Yes,I mean no.Everything but the fender mounting,AFAIK. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-01-2008, 12:11 AM	#4
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Are 60-66 Stepper Bedside's same as 67-72? I know on the 73-87 beds the front area where the steps mount are different (you need to weld the lower portion of the 67-72 bed where the step bolts up to the 73-87 beds)... are they different on the 55-66 beds as well???? For some reason... I'm thinking they're the same??? But if it's a super nice bed, it may be worth filling some holes and doing some welding work? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 05-01-2008 at 12:13 AM.

05-01-2008, 05:04 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Are 60-66 Stepper Bedside's same as 67-72? 60-66 have nearly the same steps.Thet don`t tie into the front stancions like`73-ups. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-01-2008, 05:08 AM	#6
Richard8971 Still livin the "dream" in '54 Join Date: Nov 2006 Location: Tucson, AZ Posts: 2,656	Re: Are 60-66 Stepper Bedside's same as 67-72? Rick the bedsides, front panel and tailgate are the same up to '87. I believe the only change was the fenders and the step. D __________________ Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo

05-01-2008, 05:16 AM	#7
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Are 60-66 Stepper Bedside's same as 67-72? Thanks for the Info, I just need to get a Bed for the Truck so i can get on with it & Complete it. Been going on so long now I'm Getting Depressed by it................ Thanks, Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

05-01-2008, 05:43 AM	#8
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Are 60-66 Stepper Bedside's same as 67-72? Richard is correct ... same all the way up thru 1987 ... although some of the fender mounting holes are different on the later years ... can't say for 60-66

05-01-2008, 07:00 AM	#9
bowtieboy93 Registered User Join Date: Feb 2007 Location: (Cloverdale) Surrey BC Canada Posts: 1,566	Re: Are 60-66 Stepper Bedside's same as 67-72? 55-66 had the same fenders all the fender mounting holes are different than 67-72 __________________ Travis travis_moffatt@hotmail.com 1969 Chevrolet C-10 LWB, 350c.i., TH350, In Pieces. 1991 GMC Sonoma, IROCS s10 grill 1963 Ford Galaxie 351/C4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.