Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-08-2008, 05:51 PM | #1 |
Registered User
Join Date: Sep 2001
Location: Fort Wayne, Indiana, USA
Posts: 1,888
|
Installing Glovebox Liner
What is the best way to install a glovebox liner (W A/C)? My method seems difficult and I generally crease or tear something. I remove the door and put the liner through the front, press the rear of the liner against the dash and coherse the flaps behind the dash. Is there a better way?
Dan |
05-08-2008, 05:56 PM | #2 |
STOLEN
Join Date: Jun 2006
Location: Orange County
Posts: 1,022
|
Re: Installing Glovebox Liner
I found that pressing it toward the radio first allowed me to get the other side in more easily. Just watch you don't push the defrost hose off the diverter.
__________________
In Search Of |
05-08-2008, 06:39 PM | #3 |
Registered User
Join Date: Nov 2004
Location: Nebraska
Posts: 762
|
Re: Installing Glovebox Liner
This is how I normally did it. I put one in the other day and I pulled the "diverter" (t-shaped piece connected to heater box) off and slid it in towards the right first. When it was in on the right side I slipped the "diverter" back on and pushed the left side in. I think either way you go it is a hassle and on the verge of ripping all the time.
|
06-05-2008, 06:51 AM | #4 |
Registered User
Join Date: Sep 2001
Location: Fort Wayne, Indiana, USA
Posts: 1,888
|
Re: Installing Glovebox Liner
WOW! That was much easier! Lifting the "T" off of the air-box and allowing the corner of the glovebox to pass below it allowed me to install the liner with little distortion. I'll bet the assembly workers used this method. Nice tip Mint68!
|
Bookmarks |
|
|