How do you remove pushloc fittings? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lyrikz · 05-15-2008, 07:07 PM

I got my suspension stuff in, and was messing around with the pushloc fittings.. I didnt see how they worked, so i pushed my airline in, and now i see how they work. ahaha. Anyway i can get that airline out of the fitting so i can install it the right way???

I didnt trim the line at the end so it was a nice 90 degree on it. Let me know.

C10-Driver · 05-15-2008, 07:30 PM

There will be a "collar" on the fitting where the line fits in. Push the collar in and pull the line out... Should be pretty simple.

Putter · 05-15-2008, 09:06 PM

tin-snips!!!!

*Shane* · 05-16-2008, 01:19 AM

take an open end wrench the size of the tubing (1/4" - 3/8" - 1/2"-whatever) then use the open-end to "straddle" the tubing and push down on the collar while pulling the opposite direction with the tubing ... it should pop right out

C10-Driver · 05-16-2008, 05:19 PM

Quote:

Originally Posted by Shane

take an open end wrench the size of the tubing (1/4" - 3/8" - 1/2"-whatever) then use the open-end to "straddle" the tubing and push down on the collar while pulling the opposite direction with the tubing ... it should pop right out

That's a good tip Shane... I never had problems removing them with just my fingers but if you had a stubborn connection, your method would work great.

05-15-2008, 07:07 PM	#1
lyrikz PITbut Join Date: Sep 2007 Location: monroe washington Posts: 3,052	How do you remove pushloc fittings? I got my suspension stuff in, and was messing around with the pushloc fittings.. I didnt see how they worked, so i pushed my airline in, and now i see how they work. ahaha. Anyway i can get that airline out of the fitting so i can install it the right way??? I didnt trim the line at the end so it was a nice 90 degree on it. Let me know.

05-15-2008, 07:30 PM	#2
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: How do you remove pushloc fittings? There will be a "collar" on the fitting where the line fits in. Push the collar in and pull the line out... Should be pretty simple. __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

05-15-2008, 09:06 PM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: How do you remove pushloc fittings? tin-snips!!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

05-16-2008, 01:19 AM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: How do you remove pushloc fittings? take an open end wrench the size of the tubing (1/4" - 3/8" - 1/2"-whatever) then use the open-end to "straddle" the tubing and push down on the collar while pulling the opposite direction with the tubing ... it should pop right out



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.