Mounting hole locations for cheyenne super emblems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1971 K10 shortbox · 05-27-2008, 09:06 PM

Does anyone have the Dimensions for mounting hole locations on the Cheyenne Super fender Emblems.

I have some New fenders and need to drill the holes before I ship the truck off to the paintshop.

Thanks.

hotrodhomi · 05-27-2008, 09:23 PM

I saw this dimension in the assembly manual, but it doesn't show a reference point to show how high on the fender it mounts (only measures from the door gap). Anyone know what this should be? I lent my manual to my friend so I don't have any measurement right now.

1971 K10 shortbox · 05-28-2008, 03:53 AM

ttt

hotrodhomi · 05-28-2008, 04:15 AM

Took me forever to find it but, here you go.

1971 K10 shortbox · 05-28-2008, 04:20 AM

Thanks hotrodhomi, I owe ya.

Sammy · 05-28-2008, 04:23 AM

The assy manual is really a pain to find anything in. But it is helpfull for stuff like this.

72BlckButy · 05-28-2008, 04:37 AM

I think if you look in the FAQ section, you will find some more info. Look in my sig for a link to the FAQ section.

Just remember.... measure twice cut once.

Good luck!

hotrodhomi · 05-28-2008, 05:15 AM

I don't understand how this drawing even helps. The holes are not referenced to anything but the other holes. How does that help? Shouldn't there be a reference to the edge or the top of the fender. Something? Someone please explain. I feel stupid looking at this.

1971 K10 shortbox · 05-28-2008, 05:53 AM

I think these holes are the same as the Custom10 holes, with the diagram of the cutom10 hole locations and this diagram I think I am all set. If I am wrong someone please let me know.

05-27-2008, 09:06 PM	#1
1971 K10 shortbox Registered User Join Date: Jan 2008 Location: Lake Orion MI Posts: 111	Mounting hole locations for cheyenne super emblems Does anyone have the Dimensions for mounting hole locations on the Cheyenne Super fender Emblems. I have some New fenders and need to drill the holes before I ship the truck off to the paintshop. Thanks. __________________ 1971 Chevy SWB 4x4 1971 Chevy LWB 2003 Duramax

05-27-2008, 09:23 PM	#2
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Mounting hole locations for cheyenne super emblems I saw this dimension in the assembly manual, but it doesn't show a reference point to show how high on the fender it mounts (only measures from the door gap). Anyone know what this should be? I lent my manual to my friend so I don't have any measurement right now. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

05-28-2008, 03:53 AM	#3
1971 K10 shortbox Registered User Join Date: Jan 2008 Location: Lake Orion MI Posts: 111	Re: Mounting hole locations for cheyenne super emblems ttt __________________ 1971 Chevy SWB 4x4 1971 Chevy LWB 2003 Duramax

05-28-2008, 04:15 AM	#4
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Mounting hole locations for cheyenne super emblems Took me forever to find it but, here you go. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht Last edited by hotrodhomi; 05-28-2008 at 04:16 AM.

05-28-2008, 04:20 AM	#5
1971 K10 shortbox Registered User Join Date: Jan 2008 Location: Lake Orion MI Posts: 111	Re: Mounting hole locations for cheyenne super emblems Thanks hotrodhomi, I owe ya. __________________ 1971 Chevy SWB 4x4 1971 Chevy LWB 2003 Duramax

05-28-2008, 04:23 AM	#6
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Mounting hole locations for cheyenne super emblems The assy manual is really a pain to find anything in. But it is helpfull for stuff like this. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

05-28-2008, 04:37 AM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Mounting hole locations for cheyenne super emblems I think if you look in the FAQ section, you will find some more info. Look in my sig for a link to the FAQ section. Just remember.... measure twice cut once. Good luck! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 05-28-2008 at 04:38 AM.

05-28-2008, 05:15 AM	#8
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Mounting hole locations for cheyenne super emblems I don't understand how this drawing even helps. The holes are not referenced to anything but the other holes. How does that help? Shouldn't there be a reference to the edge or the top of the fender. Something? Someone please explain. I feel stupid looking at this. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

05-28-2008, 05:53 AM	#9
1971 K10 shortbox Registered User Join Date: Jan 2008 Location: Lake Orion MI Posts: 111	Re: Mounting hole locations for cheyenne super emblems I think these holes are the same as the Custom10 holes, with the diagram of the cutom10 hole locations and this diagram I think I am all set. If I am wrong someone please let me know. __________________ 1971 Chevy SWB 4x4 1971 Chevy LWB 2003 Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.