Need 1969 Olds Cutlass Tail housings/lenses ASAP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Reumster · 02-02-2003, 08:51 PM

Anyone know where I can get 1969 Olds Cutlass housings and lenses? Need both from same side, either side. Need to know if they make new lenses?

O'l Buck · 02-02-2003, 10:33 PM

Too bad you didn't catch me a couple months ago, I sold a pair on ebay. I'm pretty sure they make new lenses, but I'm not sure about the bezels.

Reumster · 02-03-2003, 07:19 AM

O'l Buck

Do the lenses unbolt from the housings? Do you know where I can look for new Lenses? Thank you

meathead95 · 02-03-2003, 09:25 AM

are 67 the same?

O'l Buck · 02-03-2003, 01:02 PM

67 are WAY different, yes, the lenses are screwed to the housings. I don't have any links to parts suppliers, right off the top of my head, you can check "the paddock" all my catalogs are in the bedroom closet......and there's so much crap piled in front of that door, it'll take me all day to get in there. You might check out the oldspower.com board and see if they have any good sugestions. I can tell you that 69 tail lights are 69 only, they won't fit anything else, Oldsmobile was funny that way.

Reumster · 02-03-2003, 07:40 PM

Thanks for the info.

02-02-2003, 08:51 PM	#1
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Need 1969 Olds Cutlass Tail housings/lenses ASAP Anyone know where I can get 1969 Olds Cutlass housings and lenses? Need both from same side, either side. Need to know if they make new lenses? __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

02-02-2003, 10:33 PM	#2
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	Too bad you didn't catch me a couple months ago, I sold a pair on ebay. I'm pretty sure they make new lenses, but I'm not sure about the bezels. __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

02-03-2003, 07:19 AM	#3
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	O'l Buck Do the lenses unbolt from the housings? Do you know where I can look for new Lenses? Thank you __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

02-03-2003, 09:25 AM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	are 67 the same? __________________ 72 2wd blazer 72 swb 4x4

02-03-2003, 01:02 PM	#5
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	67 are WAY different, yes, the lenses are screwed to the housings. I don't have any links to parts suppliers, right off the top of my head, you can check "the paddock" all my catalogs are in the bedroom closet......and there's so much crap piled in front of that door, it'll take me all day to get in there. You might check out the oldspower.com board and see if they have any good sugestions. I can tell you that 69 tail lights are 69 only, they won't fit anything else, Oldsmobile was funny that way. __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

02-03-2003, 07:40 PM	#6
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Thanks for the info. __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.