Which Headers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

renegade8720 · 06-08-2008, 01:39 AM

I am wanting a set of ceramic coated headers for my 68 with a 350, angle plug heads. I have a set of Headman full length, but they hang too low below the frame. I saw on here somewhere that the full length headers for a Chevelle application work on our trucks but do not hang as low as the truck headers. I am running a 3" drop front and 4" drop rear. I would like my exhaust to stay up in the frame rails.
Thanks in advance for any advice or suggestions.

Renegade

**special-K** · 06-08-2008, 09:03 AM

Thorley makes tri-ys that work real nice.

fastom · 06-08-2008, 07:53 PM

Early Classic sells a nice set, made by Sanderson, or try Sanderson.
http://www.earlyclassic.com/
http://www.sandersonheaders.com/prod...roducts_id=135

**leddzepp** · 06-08-2008, 08:19 PM

Thorley's are the best

caminokid · 06-08-2008, 09:58 PM

I have a set of hooker super comps for mine.

chevy72blu · 06-08-2008, 11:25 PM

Quote:

Originally Posted by caminokid

I have a set of hooker super comps for mine.

How low do they hang?

renegade8720 · 06-09-2008, 04:04 AM

Quote:

Originally Posted by fastom

Early Classic sells a nice set, made by Sanderson, or try Sanderson.
http://www.earlyclassic.com/
http://www.sandersonheaders.com/prod...roducts_id=135

I checked with Sanderson and they suggessted the block huggers. They said their 3/4 lngth would not fit with my angle plug heads. I do not want block huggers. I know that Headman makes a shorty style and Patriot. I am thinking of going with the Patriot right now.

Rob

caminokid · 06-09-2008, 09:03 AM

Quote:

Originally Posted by chevy72blu

How low do they hang?

I know I have pics of them on the 69 fleet somewhere I will find them later and post them for you.

LUV2XCLR8 · 06-09-2008, 02:48 PM

Not sure about 2wd's, but I have Hedman Elites on GQ and it was a big
differance in clearance vs. what I had on there before I changed them.
(If you know about 4wd's mine are full length & higher than spring eyes)

Jim_PA · 06-09-2008, 03:38 PM

The thorley's will put you right about here. If you want it in the frame rails, you'll have to go with shorty's:

06-08-2008, 01:39 AM	#1
renegade8720 Registered User Join Date: Nov 2007 Location: Kingsport, TN Posts: 193	Which Headers? I am wanting a set of ceramic coated headers for my 68 with a 350, angle plug heads. I have a set of Headman full length, but they hang too low below the frame. I saw on here somewhere that the full length headers for a Chevelle application work on our trucks but do not hang as low as the truck headers. I am running a 3" drop front and 4" drop rear. I would like my exhaust to stay up in the frame rails. Thanks in advance for any advice or suggestions. Renegade

06-08-2008, 09:03 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Which Headers? Thorley makes tri-ys that work real nice. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-08-2008, 07:53 PM	#3
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Which Headers? Early Classic sells a nice set, made by Sanderson, or try Sanderson. http://www.earlyclassic.com/ http://www.sandersonheaders.com/prod...roducts_id=135

06-08-2008, 08:19 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Which Headers? Thorley's are the best

06-08-2008, 09:58 PM	#5
caminokid Chevy nut Join Date: Jun 2007 Location: Springfield, Illinois Posts: 2,266	Re: Which Headers? I have a set of hooker super comps for mine. __________________ 84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!"

06-09-2008, 02:48 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Which Headers? Not sure about 2wd's, but I have Hedman Elites on GQ and it was a big differance in clearance vs. what I had on there before I changed them. (If you know about 4wd's mine are full length & higher than spring eyes) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-09-2008, 03:38 PM	#10
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Which Headers? The thorley's will put you right about here. If you want it in the frame rails, you'll have to go with shorty's: Last edited by Jim_PA; 06-09-2008 at 03:39 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.