72 Cheyenne Build Thread - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67_C-30 · 07-19-2008, 12:53 AM

Beautimus!!!

OLDIRON69 · 07-21-2008, 08:44 AM

One of my favorites for sure.

Oldironracing · 08-03-2008, 06:03 PM

What year model truck did the 60 /40 seat come out of? I need some new doors for my 72 cant find any. What did you use?

Jtrux · 08-03-2008, 06:28 PM

That truck is very nice, good job.

**Palf70Step** · 08-03-2008, 08:08 PM

Quote:

Originally Posted by Oldironracing

What year model truck did the 60 /40 seat come out of? I need some new doors for my 72 cant find any. What did you use?

Chevy/GMC C1500/2500 88-91 is in his. You can get the same seat up to 94, but the 92-94 will have adjustable headrests.

67dragtruck · 08-03-2008, 09:19 PM

You have one amazing truck. I hope mine turns out anywhere near that nice.

Tom

**SactoJim** · 08-04-2008, 04:25 PM

Thanks as always all!.......isn't any of us that don't like a "pat on the back" for all the work involved to make an old truck look good again!

FREEMAN70 · 08-04-2008, 05:02 PM

man you have one sweeeet ride .

chevy72blu · 08-05-2008, 12:55 PM

Epic build

CUZICAN_RYDA · 08-06-2008, 04:56 AM

Gorgeous Truck. Love That Blue Hue.

Bowtiefreak · 08-06-2008, 06:05 AM

Hey SactoJim,

What did you end up doing for your front carpet area where the carpet ends and the Dynomat beging. I'm in the same boat right now and want to find something.

Thanks, Ron

**SactoJim** · 08-09-2008, 02:42 PM

Quote:

Originally Posted by FREEMAN70

man you have one sweeeet ride .

Quote:

Originally Posted by chevy72blu

Epic build

Quote:

Originally Posted by CUZICAN_RYDA

Gorgeous Truck. Love That Blue Hue.

As always.....thanks a ton for the compliments!

Quote:

Originally Posted by Bowtiefreak

Hey SactoJim,

What did you end up doing for your front carpet area where the carpet ends and the Dynomat beging. I'm in the same boat right now and want to find something.

Thanks, Ron

Ron.....the auto parts places around here (Kragen, AutoZone...etc) carry rolls of carpet (actually "felt" like and pretty light duty) that I just cut to fit and glued down to the floor. It's only like $10 a roll and worked great and I also used in on my sub box. Only downside is that there aren't but a few colors available.

sleepertruck72 · 08-10-2008, 01:53 AM

Beautiful truck ! That blue is perfect !
Not to mention the craftsmanship put into the truck! Outstanding !

67dragtruck · 08-10-2008, 07:11 AM

When I get in a hurry on my new build, I will have to come back and look at this again because you have some patience and do some VERY nice work.

Tom

SacramentoJoe · 09-18-2008, 05:03 PM

Quote:

Originally Posted by SactoJim

Anytime.....I work in Roseville and try to get to at least one weekday car show everyweek.....gonna maybe hit downtown Roseville next tuesday and/or maybe Strikes bowling alley in Rocklin on Wednesday.

Holy Cow, Nice Truck! I wanted to go to the Tuesday Night Downtown, just never made it there, too bad for me. Maybe I'll see you around town.

jb1016 · 09-19-2008, 07:58 PM

You're probably tired of hearing this, but killer truck. I love the stance and the wheels...love that you kept the trim and moldings...and I'm really digging the color; it reminds me of "marina blue" from chevelles, camaros, vettes, etc.

**SactoJim** · 09-23-2008, 12:01 AM

Quote:

Originally Posted by sleepertruck72

Beautiful truck ! That blue is perfect !
Not to mention the craftsmanship put into the truck! Outstanding !

Quote:

Originally Posted by 67dragtruck

When I get in a hurry on my new build, I will have to come back and look at this again because you have some patience and do some VERY nice work.

Tom

Quote:

Originally Posted by SacramentoJoe

Holy Cow, Nice Truck! I wanted to go to the Tuesday Night Downtown, just never made it there, too bad for me. Maybe I'll see you around town.

Quote:

Originally Posted by jb1016

You're probably tired of hearing this, but killer truck. I love the stance and the wheels...love that you kept the trim and moldings...and I'm really digging the color; it reminds me of "marina blue" from chevelles, camaros, vettes, etc.

Thanks very much!

SacramentoJoe.....I see you cruising around Roseville from time to time, so if some stranger honks at you in a White F150...it's just me.

jb1016.....never get tired of hearing it (who would?)....lot of work went into this thing and I appreciate the "attaboys"! You hit the nail on the head with the Marina Blue......that's why I painted it later model Corvette Blue.

5150.4.67 · 09-25-2008, 12:27 AM

Sactojim,
Did you have any problems with those stamped steel hats? I had my axles turned down and after everythings mounted securely I have 0.050 runout. Wondering if I should use aluminum hats.
Anyway, your truck is a great inspiration!

Jay

**SactoJim** · 09-25-2008, 02:29 PM

Quote:

Originally Posted by 5150.4.67

Sactojim,
Did you have any problems with those stamped steel hats? I had my axles turned down and after everythings mounted securely I have 0.050 runout. Wondering if I should use aluminum hats.
Anyway, your truck is a great inspiration!

Jay

Though I haven't measured mine, I have a bit of runout as well (side to side). I have about 3,000 miles on it, had it up to 100 mph a few times and no weird vibrations or braking probs.

I'd say just leave it like it is and see how it acts.

Thanks!

**SactoJim** · 10-04-2008, 06:36 PM

Local car show pics last week.

took 3rd place......1st went to a "trailer queen" 57 pickup that was beautiful and 2nd went to a Willy's pickup with a 348 "W" motor in it...cool truck.

glock35ipsc · 11-02-2008, 12:54 PM

Had to get some inspiration and ideas again. It looks freaking beautiful Jim! You even have me thinking about adding a supercharger to mine since it all fits under the hood, and Mama even said I could do it!

Great job!

'72GreenBeast · 11-18-2008, 02:21 AM

You have a GORGEOUS creation here! I really admire your stupendous craftsmanship in every detail of your truck.

I was thinking of putting a fuel cell in my truck. How is yours working out for you?

STOCKISH · 11-18-2008, 11:05 AM

Your truck is absolutely one of my favorites on this board. Craftsmanship is top notch. Paint is beautiful, the list could go on and on. I hope my truck turns out half as nice as yours. Thanks for the inspiration. --Josh

**SactoJim** · 11-19-2008, 09:11 PM

Quote:

Originally Posted by '72GreenBeast

You have a GORGEOUS creation here! I really admire your stupendous craftsmanship in every detail of your truck.

I was thinking of putting a fuel cell in my truck. How is yours working out for you?

Thank you very much!.....as far as the tank goes, I'm very happy with it and it works just perfect with the only drawback being that I have to drop the tailgate everytime I fuel up.....and that's quite often cuz it's kinda thirsty!

Quote:

Originally Posted by 1972SuperCheyenne

Your truck is absolutely one of my favorites on this board. Craftsmanship is top notch. Paint is beautiful, the list could go on and on. I hope my truck turns out half as nice as yours. Thanks for the inspiration. --Josh

Thanks a lot Josh!......I can honestly say, I know every square inch of this thing in detail...and then some!.......thanks again for the compliment.

Painter D · 11-19-2008, 09:29 PM

Sacto Jim
This is my absolute favorite truck on this forum. I like everything about it, I even borrowed a few ideas for my own truck. (Hope you don't mind) The planning and execution is second to none ,and the quality is superior. I'm sure you've heard this a thousand times, Job Well Done.

07-19-2008, 12:53 AM	#176
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: 72 Cheyenne Build Thread Beautimus!!! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

07-21-2008, 08:44 AM	#177
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: 72 Cheyenne Build Thread One of my favorites for sure. __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

08-03-2008, 06:03 PM	#178
Oldironracing Registered User Join Date: Oct 2007 Location: Austin Arkansas Posts: 252	Re: 72 Cheyenne Build Thread What year model truck did the 60 /40 seat come out of? I need some new doors for my 72 cant find any. What did you use? __________________ OLDIRONRACING Last edited by Oldironracing; 08-03-2008 at 06:04 PM.

08-03-2008, 06:28 PM	#179
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: 72 Cheyenne Build Thread That truck is very nice, good job. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

08-03-2008, 09:19 PM	#181
67dragtruck Registered User Join Date: May 2001 Location: Bethlehem, GA, USA Posts: 389	Re: 72 Cheyenne Build Thread You have one amazing truck. I hope mine turns out anywhere near that nice. Tom __________________ No more dragtruck for me. I'm building a new ride though. It's a '71 fleetside, 400 sbc, 700R4. Working on it now, finally. Soon to have Edelbrock Pro Flo EFI, Vintage Air, 1 piece windows, buddy buckets, etc. My new build thread: http://67-72chevytrucks.com/vboard/s...17#post2861817 Best pass with the old dragtruck: 5.32 @ 131.6 mph 1/8 mile w/ a 1.25 60' Fogger/Plate 2003 Best pass with the street 406 hydraulic roller motor w/ mild plate tuneup 5.93 @ 114 mph 1/8 mile w/ a 1.29 60' 2003 or 2004

08-04-2008, 04:25 PM	#182
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread Thanks as always all!.......isn't any of us that don't like a "pat on the back" for all the work involved to make an old truck look good again! __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

08-04-2008, 05:02 PM	#183
FREEMAN70 Registered User Join Date: Apr 2007 Location: robbins Posts: 73	Re: 72 Cheyenne Build Thread man you have one sweeeet ride .

08-05-2008, 12:55 PM	#184
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,189	Re: 72 Cheyenne Build Thread Epic build __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

08-06-2008, 04:56 AM	#185
CUZICAN_RYDA Registered User Join Date: Aug 2008 Location: "The Park", Maryland Posts: 29	Re: 72 Cheyenne Build Thread Gorgeous Truck. Love That Blue Hue. __________________ Enigma comin '09 Low-Riders.com

08-06-2008, 06:05 AM	#186
Bowtiefreak Registered User Join Date: Jul 2003 Location: LeRoy, Mich. Posts: 854	Re: 72 Cheyenne Build Thread Hey SactoJim, What did you end up doing for your front carpet area where the carpet ends and the Dynomat beging. I'm in the same boat right now and want to find something. Thanks, Ron __________________ 1968 Chevy C10 Short Fleetside/Wood floor ECE 4-6 Drop / 406 Small Block 1971 Chevelle 427 Big Block

08-10-2008, 01:53 AM	#188
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 72 Cheyenne Build Thread Beautiful truck ! That blue is perfect ! Not to mention the craftsmanship put into the truck! Outstanding ! __________________ 72 C20 Longbed 05 1500 Z71

08-10-2008, 07:11 AM	#189
67dragtruck Registered User Join Date: May 2001 Location: Bethlehem, GA, USA Posts: 389	Re: 72 Cheyenne Build Thread When I get in a hurry on my new build, I will have to come back and look at this again because you have some patience and do some VERY nice work. Tom __________________ No more dragtruck for me. I'm building a new ride though. It's a '71 fleetside, 400 sbc, 700R4. Working on it now, finally. Soon to have Edelbrock Pro Flo EFI, Vintage Air, 1 piece windows, buddy buckets, etc. My new build thread: http://67-72chevytrucks.com/vboard/s...17#post2861817 Best pass with the old dragtruck: 5.32 @ 131.6 mph 1/8 mile w/ a 1.25 60' Fogger/Plate 2003 Best pass with the street 406 hydraulic roller motor w/ mild plate tuneup 5.93 @ 114 mph 1/8 mile w/ a 1.29 60' 2003 or 2004

09-25-2008, 12:27 AM	#193
5150.4.67 Registered User Join Date: Dec 2007 Location: Modesto, Ca Posts: 411	Re: 72 Cheyenne Build Thread Sactojim, Did you have any problems with those stamped steel hats? I had my axles turned down and after everythings mounted securely I have 0.050 runout. Wondering if I should use aluminum hats. Anyway, your truck is a great inspiration! Jay

10-04-2008, 06:36 PM	#195
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread Local car show pics last week. took 3rd place......1st went to a "trailer queen" 57 pickup that was beautiful and 2nd went to a Willy's pickup with a 348 "W" motor in it...cool truck. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

11-02-2008, 12:54 PM	#196
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: 72 Cheyenne Build Thread Had to get some inspiration and ideas again. It looks freaking beautiful Jim! You even have me thinking about adding a supercharger to mine since it all fits under the hood, and Mama even said I could do it! Great job! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE



Register or Log In To remove these advertisements.

11-18-2008, 02:21 AM	#197
'72GreenBeast Registered User Join Date: Nov 2008 Location: Texas City, TX Posts: 2	Re: 72 Cheyenne Build Thread You have a GORGEOUS creation here! I really admire your stupendous craftsmanship in every detail of your truck. I was thinking of putting a fuel cell in my truck. How is yours working out for you? __________________ 1972 Green 3/4 402 !WIP!

11-18-2008, 11:05 AM	#198
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 72 Cheyenne Build Thread Your truck is absolutely one of my favorites on this board. Craftsmanship is top notch. Paint is beautiful, the list could go on and on. I hope my truck turns out half as nice as yours. Thanks for the inspiration. --Josh

11-19-2008, 09:29 PM	#200
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: 72 Cheyenne Build Thread Sacto Jim This is my absolute favorite truck on this forum. I like everything about it, I even borrowed a few ideas for my own truck. (Hope you don't mind) The planning and execution is second to none ,and the quality is superior. I'm sure you've heard this a thousand times, Job Well Done. __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

Register or Log In To remove these advertisements.