WTB, double groove water pump pulley, I-6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NitroMike · 08-03-2008, 11:22 AM

Putting p/s on an I-6 250 in my '67. Need a double groove water pump pulley for a 6 cylinder. Anybody got one?
Thanks,

Mike D.

*sharpie1972* · 08-03-2008, 03:59 PM

Hi Mike, $40 shipped. Thanks, Dennis. Paypal denscustom1@hotmail.com

**PICKMUP** · 08-03-2008, 05:21 PM

FYI: The 3-groove balancer is 292. I don't know if that will work on the 250 OK or not.

NitroMike · 08-03-2008, 07:53 PM

Dennis,

This looks right even though you are showing it on a 292. Would you mind measuring the dimension of the pulley front to back?

I'm not concerned with the 3 groove pulley on the crank. Have a 2 groover that should work just fine.

Thanks,

Mike D.

nplocoman · 08-03-2008, 07:59 PM

how much for the balancer?

*sharpie1972* · 08-03-2008, 10:19 PM

1 1/2" deep on grooves, 3" deep from front to back.

NitroMike · 08-03-2008, 11:46 PM

That's the one I need!

Paypal sent. Thanks.

Mike D.

08-03-2008, 11:22 AM	#1
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	WTB, double groove water pump pulley, I-6 Putting p/s on an I-6 250 in my '67. Need a double groove water pump pulley for a 6 cylinder. Anybody got one? Thanks, Mike D. __________________ The older I get, the faster I was!!

08-03-2008, 03:59 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: WTB, double groove water pump pulley, I-6 Hi Mike, $40 shipped. Thanks, Dennis. Paypal denscustom1@hotmail.com Attached Images Last edited by sharpie1972; 08-03-2008 at 04:06 PM. Reason: spelling

08-03-2008, 05:21 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,139	Re: WTB, double groove water pump pulley, I-6 FYI: The 3-groove balancer is 292. I don't know if that will work on the 250 OK or not.

08-03-2008, 07:53 PM	#4
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: WTB, double groove water pump pulley, I-6 Dennis, This looks right even though you are showing it on a 292. Would you mind measuring the dimension of the pulley front to back? I'm not concerned with the 3 groove pulley on the crank. Have a 2 groover that should work just fine. Thanks, Mike D. __________________ The older I get, the faster I was!!

08-03-2008, 07:59 PM	#5
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: WTB, double groove water pump pulley, I-6 how much for the balancer?

08-03-2008, 10:19 PM	#6
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: WTB, double groove water pump pulley, I-6 1 1/2" deep on grooves, 3" deep from front to back.

08-03-2008, 11:46 PM	#7
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: WTB, double groove water pump pulley, I-6 That's the one I need! Paypal sent. Thanks. Mike D. __________________ The older I get, the faster I was!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.