77 to 55 thanksgiving - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tiggerstoy · 08-10-2008, 10:21 AM

well, i used a gastank from a s-10, i took off 1 inch from each side of the lower frame rail, made 2 straps, used a piece of angle for the cross mount bar so i did'nt have to move the rear cross member on the frame, it fits verry nice, and only took about and hour, i still have to decide wether im going to cut the upper frame rail to give room for the filler neck, or cap the fill hole on the tank, and make a new fill hole in the center-top of the tank and fillit from the box floor, but i like the idea of filling the truck from the fender, gives me the box to be able to be used.....what do you think?.....max.

tiggerstoy · 08-10-2008, 11:49 AM

well, im trying to post some pics, but it keeps comeing up as error on page!?

tiggerstoy · 08-11-2008, 07:18 PM

the truck back at the shop

56chevy1300 · 08-19-2008, 12:27 AM

Hey Max, I was down at the Good Guys show in Spokane on the weekend, took these shots with you in mind!

northerngmc · 10-01-2008, 11:45 AM

Max

Anymore progress?

tiggerstoy · 03-18-2009, 04:37 PM

those pics are cool, i;v been buisy on everyone elses toys, but ill try to put up a pic or 2

71'tahoe · 03-18-2009, 08:55 PM

Looking good! I was wondering what ever happened to this project!

**Palf70Step** · 03-18-2009, 09:08 PM

Same here. I understand about working on every and everyone's project but your own. Can't wait to see you get back into it.

ezekiel · 03-19-2009, 12:20 AM

Hey tiggerstoy,

I am wondering about the axle widths of your donor frame. My research tells me that they ought to be about 2 to 4 inches too wide.

Do you think you the wheels fit in the fenders well or is it just a little bit too wide?

stan3018 · 03-19-2009, 07:24 AM

good job man keep it up.....

tiggerstoy · 03-19-2009, 10:41 PM

thanks im still working on geting her done, but luv'n the time i have with her.....it's a love thang...lol

tiggerstoy · 03-19-2009, 10:45 PM

Quote:

Originally Posted by ezekiel

Hey tiggerstoy,

I am wondering about the axle widths of your donor frame. My research tells me that they ought to be about 2 to 4 inches too wide.

Do you think you the wheels fit in the fenders well or is it just a little bit too wide?

you are right, but i had planed to have to build wide fenders, or go 4-link with a 4 inch tub, for now, i'll just work the box to look stock, but it will be wider than stock, but it will look the part.......i hope...lol

tiggerstoy · 03-19-2009, 10:55 PM

Quote:

Originally Posted by stan3018

good job man keep it up.....

thank you my friend, i' ll try harder to get this rat rodish looking daily driver to completion so you all have something to coment on soon.....lol, i love the time i get to work on her, but i just dont have the time owning the shop, bills.....you know what i mean.....lol.

tiggerstoy · 04-06-2009, 01:17 PM

well, still working on the box, i have most of the glass back in, and im still working on the seats....i'll post pic's as i get them.

joeys66pickup · 04-06-2009, 03:51 PM

that last one, what frame is it sitting on again? sorry... But nice Work!

**Palf70Step** · 04-06-2009, 08:21 PM

Glad to hear some work is moving forward on it. Can't wait to see the final put together on her.

tiggerstoy · 04-14-2009, 09:03 PM

Quote:

Originally Posted by joeys66pickup

that last one, what frame is it sitting on again? sorry... But nice Work!

it's a 77 shortbox, and thank you.

tiggerstoy · 04-14-2009, 09:04 PM

Quote:

Originally Posted by Palf70Step

Glad to hear some work is moving forward on it. Can't wait to see the final put together on her.

thanks bud, slow but sure.

tiggerstoy · 04-14-2009, 09:06 PM

added a gas door.

tiggerstoy · 06-16-2009, 04:24 PM

well, i took the old girl for a ride around the block, lots of fun, it run's great, but still have a fue bug's to work-out.
i realy need to post some of the pics, i'll have to get someone to take a look at my p.c to figgure out why it's not up-loading.

entourageguy · 06-16-2009, 08:32 PM

Nice to see you back in town ...

tiggerstoy · 06-16-2009, 11:17 PM

Name: C060309_1338_00.jpg
Views: 488
Size: 63.1 KB

Name: C060809_1336_01.jpg
Views: 488
Size: 66.3 KB

Name: 0512092139.jpg
Views: 486
Size: 69.9 KB

tiggerstoy · 06-16-2009, 11:18 PM

that's the best i could do with the p.c

**Palf70Step** · 06-17-2009, 04:51 AM

Truck is looking real good!!

OrrieG · 06-17-2009, 11:44 AM

Looks like it sprouted flames too!

08-10-2008, 10:21 AM	#176
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving well, i used a gastank from a s-10, i took off 1 inch from each side of the lower frame rail, made 2 straps, used a piece of angle for the cross mount bar so i did'nt have to move the rear cross member on the frame, it fits verry nice, and only took about and hour, i still have to decide wether im going to cut the upper frame rail to give room for the filler neck, or cap the fill hole on the tank, and make a new fill hole in the center-top of the tank and fillit from the box floor, but i like the idea of filling the truck from the fender, gives me the box to be able to be used.....what do you think?.....max.

08-10-2008, 11:49 AM	#177
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving well, im trying to post some pics, but it keeps comeing up as error on page!?

08-11-2008, 07:18 PM	#178
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving the truck back at the shop Attached Images

08-19-2008, 12:27 AM	#179
56chevy1300 Registered User Join Date: Dec 2006 Location: Edmonton, Alberta Posts: 522	Re: 77 to 55 thanksgiving Hey Max, I was down at the Good Guys show in Spokane on the weekend, took these shots with you in mind! Attached Images

10-01-2008, 11:45 AM	#180
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: 77 to 55 thanksgiving Max Anymore progress? __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

03-18-2009, 04:37 PM	#181
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving those pics are cool, i;v been buisy on everyone elses toys, but ill try to put up a pic or 2 Attached Images

03-18-2009, 08:55 PM	#182
71'tahoe Registered User Join Date: Feb 2004 Location: lynchburg ohio Posts: 736	Re: 77 to 55 thanksgiving Looking good! I was wondering what ever happened to this project!

03-18-2009, 09:08 PM	#183
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: 77 to 55 thanksgiving Same here. I understand about working on every and everyone's project but your own. Can't wait to see you get back into it. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-19-2009, 12:20 AM	#184
ezekiel Registered User Join Date: Dec 2006 Location: Calgary, Canada Posts: 54	Re: 77 to 55 thanksgiving Hey tiggerstoy, I am wondering about the axle widths of your donor frame. My research tells me that they ought to be about 2 to 4 inches too wide. Do you think you the wheels fit in the fenders well or is it just a little bit too wide?

03-19-2009, 07:24 AM	#185
stan3018 Registered User Join Date: Feb 2009 Location: bronx ny Posts: 167	Re: 77 to 55 thanksgiving good job man keep it up.....

03-19-2009, 10:41 PM	#186
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving thanks im still working on geting her done, but luv'n the time i have with her.....it's a love thang...lol

04-06-2009, 01:17 PM	#189
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving well, still working on the box, i have most of the glass back in, and im still working on the seats....i'll post pic's as i get them.

04-06-2009, 03:51 PM	#190
joeys66pickup Dr. Frankenstein Join Date: Feb 2008 Location: beaverton,Or Posts: 458	Re: 77 to 55 thanksgiving that last one, what frame is it sitting on again? sorry... But nice Work! __________________ I Wanna Go Fast!!

04-06-2009, 08:21 PM	#191
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: 77 to 55 thanksgiving Glad to hear some work is moving forward on it. Can't wait to see the final put together on her. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-14-2009, 09:06 PM	#194
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving added a gas door. Attached Images



Register or Log In To remove these advertisements.

06-16-2009, 04:24 PM	#195
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving well, i took the old girl for a ride around the block, lots of fun, it run's great, but still have a fue bug's to work-out. i realy need to post some of the pics, i'll have to get someone to take a look at my p.c to figgure out why it's not up-loading.

06-16-2009, 08:32 PM	#196
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: 77 to 55 thanksgiving Nice to see you back in town ... __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

06-16-2009, 11:17 PM	#197
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving

06-16-2009, 11:18 PM	#198
tiggerstoy tiggerstoy Join Date: Mar 2007 Location: camrose Alberta Canada Posts: 416	Re: 77 to 55 thanksgiving that's the best i could do with the p.c

06-17-2009, 04:51 AM	#199
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: 77 to 55 thanksgiving Truck is looking real good!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-17-2009, 11:44 AM	#200
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: 77 to 55 thanksgiving Looks like it sprouted flames too! __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

Register or Log In To remove these advertisements.