Post your dashes & guage clusters - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ol'Rover · 08-22-2008, 10:02 PM

trying to get ideas for Dash's and guage clusters. Post your custom, modified and even stock dash's.

Thanks.

-Kurt

463 · 08-22-2008, 10:11 PM

though i would try the blue look (sun supper tac mix and match with the factory tac dash)

463 · 08-22-2008, 10:38 PM

here is the truck from down the street

killer71 · 08-22-2008, 10:45 PM

Here ya go http://67-72chevytrucks.com/vboard/s...d.php?t=241100

**KevsClassics** · 08-23-2008, 12:23 AM

Here's some I reconditioned.

tdave00 · 08-23-2008, 01:29 AM

Where did you get this steering wheel from. Sharp!

**KevsClassics** · 08-23-2008, 01:42 AM

Quote:

Originally Posted by tdave00

Where did you get this steering wheel from. Sharp!

www.billetspecialties.com

GKsport67 · 08-23-2008, 02:13 AM

Kev your blazer is the epitome of Classic/Modern!!!

...maybe its Modern/Classic?
Nice work!

1969stepside · 08-23-2008, 02:15 AM

can you roll the speedo back?

mrein3 · 08-23-2008, 08:54 AM

Here's what I'm rolling with...

Andy4639 · 08-23-2008, 10:22 AM

Mine is factory tach with a added speed warning buzzer. I also added the clock out of a later 70's truck.

Ol'Rover · 08-23-2008, 10:09 PM

great stuff! keep em comin!

67_C-30 · 08-23-2008, 10:56 PM

The first is the cluster in my ramp truck. The bezel has been painted with balck polyurethane and had a Cheyenne Super woodgrain decal with white overlays. I used the white decals on the faces and on the tins (instead of painting the tins white) and sanded the letters and numbers off of the factory lens, and polished it out clear. I didn't care for the greenish looking letters against the white. Its a little different looking than most.

The second is the cluster that is going in my '67 C-30. It has a vacuum gauge a 4000 RPM diesel tach. I am going to put a woodgrain decal on it also, but I'm going to paint it with textured bedliner paint like I did on the glove box lid of my '69 C-10. Really different!

corn · 08-24-2008, 03:10 AM

Mine, nothin special though...

tommys69/454 · 08-24-2008, 07:38 AM

this is mine

biggreen292 · 08-24-2008, 08:47 PM

cant see it but has an aftermarket vacuum gauge where the factory one would be. looks 70's vintage. and yes there are new pedal pads on it now

ChevLoRay · 08-24-2008, 08:53 PM

Quote:

Originally Posted by corn

Mine, nothin special though...

Engine-turned is "nothing special"?

This is a look I want, too. I have a nephew who did some engine turning for his '79 T/A dash.

The look you got is what I hope to have. Maybe the same thing as an applique on the glove box door, too. I'll be using Mahanians' radio surround and I'm thinking it'll all look good when (ever) I'm done.

Richard8971 · 08-24-2008, 08:53 PM

Quote:

Originally Posted by 1969stepside

can you roll the speedo back?

Yup, sure can. Here is mine.

D

Ol'Rover · 08-24-2008, 09:08 PM

Quote:

Originally Posted by Richard8971

Yup, sure can. Here is mine.

D

i like that bezel. i think i might do something like that bud in blue. and only the 3 guage holes, Spedo, tach, Combo(volt,oil pressure,water temp, fuel)

thanks for the ideas!

awhite4557 · 08-24-2008, 09:50 PM

I went with the Dakota Digital dash, IDIDIt tilt auto column with Billet Specialties steering wheel.

Ace in the hole · 08-24-2008, 10:04 PM

i built this one for my truck-

1969stepside · 08-24-2008, 10:22 PM

how do u roll them back and i like the engine turn how did u do that here is mine

Richard8971 · 08-24-2008, 11:12 PM

Quote:

Originally Posted by 1969stepside

how do u roll them back and i like the engine turn how did u do that here is mine

You have to disassemble the spedo. Not fun and not super easy but it can be done. Maybe someone on here has posted a thread on it. Do a search.

D

drivethechevy · 08-24-2008, 11:39 PM

here is mine its just a sun super tach 2,

since the pic was taken i have added a sun vaccume in the vacant hole in the cluster

Keep on Trucking · 08-24-2008, 11:45 PM

I will try to get a pic of mine. It came out of a C30 type truck and has the tach and a air PSI gauge where a vac gauge would be, between the column and oil PSI guage.

08-22-2008, 10:02 PM	#1
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Post your dashes & guage clusters trying to get ideas for Dash's and guage clusters. Post your custom, modified and even stock dash's. Thanks. -Kurt __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.

08-22-2008, 10:11 PM	#2
463 Registered User Join Date: Nov 2007 Location: Sask Canada Posts: 1,666	Re: Post your dashes & guage clusters though i would try the blue look (sun supper tac mix and match with the factory tac dash) __________________ Trueman Last edited by 463; 08-22-2008 at 10:14 PM.

08-22-2008, 10:38 PM	#3
463 Registered User Join Date: Nov 2007 Location: Sask Canada Posts: 1,666	Re: Post your dashes & guage clusters here is the truck from down the street __________________ Trueman

08-22-2008, 10:45 PM	#4
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Post your dashes & guage clusters Here ya go http://67-72chevytrucks.com/vboard/s...d.php?t=241100 __________________ R.I.P. Killer 71 10/26/07

08-23-2008, 12:23 AM	#5
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: Post your dashes & guage clusters Here's some I reconditioned. Attached Images

08-23-2008, 01:29 AM	#6
tdave00 Restoring a 68 SWB Join Date: Jan 2008 Location: Nashville, TN Posts: 1,068	Re: Post your dashes & guage clusters Where did you get this steering wheel from. Sharp! __________________ My Build Thread: Lucy - My 1968 SWB - Shop Truck Style North Nashville Concrete Contractor

08-23-2008, 02:13 AM	#8
GKsport67 Registered User Join Date: Jan 2008 Location: Atlanta,Ga Posts: 660	Re: Post your dashes & guage clusters Kev your blazer is the epitome of Classic/Modern!!! ...maybe its Modern/Classic? Nice work! __________________ www.gkautospa.com Like A Rock! http://67-72chevytrucks.com/vboard/s...d.php?t=397153 Last edited by GKsport67; 08-23-2008 at 02:25 AM.

08-23-2008, 02:15 AM	#9
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,208	Re: Post your dashes & guage clusters can you roll the speedo back? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

08-23-2008, 08:54 AM	#10
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	Re: Post your dashes & guage clusters Here's what I'm rolling with... Attached Images __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

08-23-2008, 10:22 AM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Post your dashes & guage clusters Mine is factory tach with a added speed warning buzzer. I also added the clock out of a later 70's truck. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-23-2008, 10:09 PM	#12
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Post your dashes & guage clusters great stuff! keep em comin! __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.

08-23-2008, 10:56 PM	#13
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Post your dashes & guage clusters The first is the cluster in my ramp truck. The bezel has been painted with balck polyurethane and had a Cheyenne Super woodgrain decal with white overlays. I used the white decals on the faces and on the tins (instead of painting the tins white) and sanded the letters and numbers off of the factory lens, and polished it out clear. I didn't care for the greenish looking letters against the white. Its a little different looking than most. The second is the cluster that is going in my '67 C-30. It has a vacuum gauge a 4000 RPM diesel tach. I am going to put a woodgrain decal on it also, but I'm going to paint it with textured bedliner paint like I did on the glove box lid of my '69 C-10. Really different! Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 08-24-2008 at 11:18 PM.

08-24-2008, 03:10 AM	#14
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Post your dashes & guage clusters Mine, nothin special though...

08-24-2008, 07:38 AM	#15
tommys69/454 1969 short box Join Date: Sep 2007 Location: waterloo,newyork Posts: 146	Re: Post your dashes & guage clusters this is mine Attached Images __________________ tommy morehouse

08-24-2008, 08:47 PM	#16
biggreen292 Registered User Join Date: Apr 2008 Location: manchester,nh Posts: 44	Re: Post your dashes & guage clusters cant see it but has an aftermarket vacuum gauge where the factory one would be. looks 70's vintage. and yes there are new pedal pads on it now __________________ http://i16.photobucket.com/albums/b3...fleet041-1.jpg 71 custom camper/20:292/saginaw, my first pickup 83 cutlass cruiser:307/th250c, lifelong project 96 caprice 9C1:LT1/4L60E, police package 83 buick regal estate: buick 350/m20 69 bel air:250/m21 Last edited by biggreen292; 08-24-2008 at 08:48 PM.



Register or Log In To remove these advertisements.

08-24-2008, 09:50 PM	#20
awhite4557 Registered User Join Date: Dec 2007 Location: Odessa, Texas Posts: 212	Re: Post your dashes & guage clusters I went with the Dakota Digital dash, IDIDIt tilt auto column with Billet Specialties steering wheel. Attached Images __________________ 1950 Chevy 3100 Ramp Bed 1-ton http://67-72chevytrucks.com/vboard/s...d.php?t=749386 1965 Chevy Step Side 1971 Chevy Short Wide Bed http://67-72chevytrucks.com/vboard/s...d.php?t=277191 1971 Chevy C-30 1-ton 1971 Chevy Chevelle 1972 Chevrolet C-30 1 ton 2005 Dodge Ram 2500 5.9 Cummins 2017 Fleetwood Pace Arrow 35M motorhome 350 Cummins 2020 Jeep Wrangler Unlimited Rubicon

08-24-2008, 10:04 PM	#21
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: Post your dashes & guage clusters i built this one for my truck- __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

08-24-2008, 10:22 PM	#22
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,208	Re: Post your dashes & guage clusters how do u roll them back and i like the engine turn how did u do that here is mine __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

08-24-2008, 11:39 PM	#24
drivethechevy Registered User Join Date: May 2007 Location: Buffalo MN Posts: 606	Re: Post your dashes & guage clusters here is mine its just a sun super tach 2, since the pic was taken i have added a sun vaccume in the vacant hole in the cluster __________________ Trial and Error, its expensive but its a mistake i most likely wont make again 1971 chevy k10 custom deluxe http://67-72chevytrucks.com/vboard/s...d.php?t=341257 1968 chevy k/10 fleet http://67-72chevytrucks.com/vboard/s...d.php?t=334731 1948 desoto custom coupe fluid drive(family heirloom)

08-24-2008, 11:45 PM	#25
Keep on Trucking Registered User Join Date: Jul 2005 Location: League city/Houston Posts: 163	Re: Post your dashes & guage clusters I will try to get a pic of mine. It came out of a C30 type truck and has the tach and a air PSI gauge where a vac gauge would be, between the column and oil PSI guage. __________________ 1970 4X4, Big block 454, 4 speed, vintage air, Mahagony wood bed, Tilt, tach. Can have new owner for the right price. "Life is tough, its tougher if you are stupid" (John Wayne) My buddys truck for sale here. http://67-72chevytrucks.com/vboard/c...p?product=2676

Register or Log In To remove these advertisements.