Project "Rock-a-Billy".....Saga Continues..... - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 09-15-2008, 06:36 AM

Thanks man.....
-
-

-
-
"Blvd Nights" cruise night in San Jose (NOTE: stain under truck is not from my truck)

sidthirteen · 09-16-2008, 01:48 AM

hey "chief" ! truck's looking good!! what size brake line did you use?5/16? what size fittings?

**ChiefRocka** · 09-17-2008, 07:02 AM

I used stock size fittings and brake line (1/4")

Frizzle Fry · 09-17-2008, 11:09 AM

Are you still gonna paint the grille? ...and when's the hood goin on?

Slmd92DIME · 09-17-2008, 12:17 PM

Lookin really good. I really like the white top

**ChiefRocka** · 09-18-2008, 09:29 AM

Quote:

Originally Posted by Frizzle Fry

Are you still gonna paint the grille? ...and when's the hood goin on?

Yeah, I still plan on it, when I get a chance.....oh, and the hood....when it starts raining !!

Quote:

Originally Posted by Slmd92DIME

Lookin really good. I really like the white top

Thanks

**ChiefRocka** · 09-23-2008, 09:18 AM

OK, I put the hood...now get off my back will ya !!

-
-
Actually, I only did it because we are remodeling the shop (previous owner permit violations) so I needed a place to store it...so, what better place than back on the truck !! (just laying there, no hinges yet)
-
-
I have to be honest, I am not used to have'n a hood on it....at all.
-

-

c10addict · 09-23-2008, 09:22 AM

Im ready to rip mine off and throw a tunnel ram on it!!! Looks good bro!!

Joey~AP · 09-23-2008, 11:24 AM

Hey Chief?

Have you seen the clear/white hood blinkers?

Tim64 · 09-23-2008, 11:41 AM

Damn John that's one hell of a nice garage ya got there. The truck & car in it are pretty sweet too!

Bazooka · 09-23-2008, 01:12 PM

I like the hood on it.

Reyals Bemus · 09-23-2008, 02:59 PM

I was just about to say, "Come on, put the hood on..." and then I saw that you did. I think it looks so much nicer with a hood. The truck looks complete with it on. Plus, it keeps your engine bay unexposed to all kinds of crap. If you wanted to show off the engine, just flip the hood...

Love the truck!

*1974k5blazer* · 09-23-2008, 03:03 PM

the spare in the bed is a nice touch!

**ChiefRocka** · 09-24-2008, 05:14 AM

Quote:

Originally Posted by c10addict

Im ready to rip mine off and throw a tunnel ram on it!!! Looks good bro!!

Really ? That would be cool.....and Thanks !

Quote:

Originally Posted by Joey~AP

Hey Chief?

Have you seen the clear/white hood blinkers?

No, but I wouldn't mind checking them out...who sells them ?? I was planning on making up my own LED blinkers.

Quote:

Originally Posted by Tim64

Damn John that's one hell of a nice garage ya got there. The truck & car in it are pretty sweet too!

That is the buildings showroom....that where we store the cars....

Quote:

Originally Posted by Bazooka

I like the hood on it.

Quote:

Originally Posted by Reyals Bemus

I was just about to say, "Come on, put the hood on..." and then I saw that you did. I think it looks so much nicer with a hood. The truck looks complete with it on. Plus, it keeps your engine bay unexposed to all kinds of crap. If you wanted to show off the engine, just flip the hood...

Love the truck!

Ya, I guess it looks ok....just been driving it so long without one....lot more front visability without one.....I guess it does it annoying having to wash bird droppings off the aircleaner....

Quote:

Originally Posted by 1974k5blazer

the spare in the bed is a nice touch!

Thanks...also frees up the rear for a fuel tank.

4dranch · 09-24-2008, 07:11 AM

John,
Glad you told us that's where you stored your cars instead of where you worked on them. I was like dude's shop is cleaner than my house. How's your wife's ride coming along? is she riding yet?

**ChiefRocka** · 09-24-2008, 07:48 AM

Well my shop isn't too bad either.....Everything is put on hold right now.....we had to knock down a wall (that wasn't supposed to be there)...and a bunch of other $hit that was wrong with the building (frickin permit laws)
-
-
Here is a current shot of the shop....everything was moved over to knock down walls. Here's a shot of my shop area on the left, and the wall we knocked down yesterday on the right:
-
-

-
This was was seperating unusable office space (previous owners, unpermited) from the rest of the wherehouse:
-

-
Now, a 2 hour FIREWALL must be build from the floor all the way up to be legal and satisfy the "man":
-

-
That will be moved 6 feet over, inline with those support beams....kinda like this:
-

-
-
Sucks, because it is so nice open like this.

4dranch · 09-24-2008, 08:45 AM

John,
I run a warehouse here in Memphis and use pallet rack in a bunch of areas.
it comes in a bunch of different heights and widths. maybe you guys could run a couple of sections down the wall. it would give you 2 rows of storage and you could hang light fixtures on the bottom and have work areas. here is a pick area in the back of my warehouse.
Just an idea.
David.

Joey~AP · 09-24-2008, 09:28 AM

Chief, I got my clear lenses thru LMC.

They had clear rear lights with LED's, but discontinued them before I could get my hands on them.

**ChiefRocka** · 09-24-2008, 09:54 AM

Quote:

Originally Posted by 4dranch

John,
I run a warehouse here in Memphis and use pallet rack in a bunch of areas.
it comes in a bunch of different heights and widths. maybe you guys could run a couple of sections down the wall. it would give you 2 rows of storage and you could hang light fixtures on the bottom and have work areas. here is a pick area in the back of my warehouse.
Just an idea.
David.

Yeap...I am defiantely gonna do something like that for sure !!!!

joe231 · 09-24-2008, 10:07 AM

I dig the hood!

ERASER5 · 09-27-2008, 01:24 AM

So does Chief sound like his nose is stopped up now that the hood is on?

You know, one good sneeze and the hood will be GONE! Hmm where have I seen that before?

Seriously, good looking truck.

I know what you mean about stupid oil leaks that should not have happened. All that cleaning wasted. Irritating.

**ChiefRocka** · 09-27-2008, 09:32 AM

Probably would loose the hood...considering it's just laying there with no hinges !!

-
-
Leaks suck...took care of that with a one-piece seal and a new USA Moroso stock pan.

The only leak I have now is just the stock 3-speed, drips after being driven.

Not adding oil to it...mabey it'll blow soon, and that'll give me an excuse to throw in the 700R4 !

**ChiefRocka** · 10-24-2008, 07:56 AM

I'm back with nothing much to add...truck just sitting for dust-collecting time...Took it out yesterday to pick up some lunch.
-
-
Won these the other day on E-bay...should arrive soon...
-
-

jonzcustomshop · 10-24-2008, 08:06 AM

I want a set of those too, I like the earlier ones better than the later.

**ChiefRocka** · 10-24-2008, 08:11 AM

I know what you mean...

Actually, after I bid on them...I wasn't sure they were for the right year...but I checked and I was relieved.

The add listed 60-66...but these are the early ones.

09-15-2008, 06:36 AM	#426
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... Thanks man..... - - - - "Blvd Nights" cruise night in San Jose (NOTE: stain under truck is not from my truck) __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 09-15-2008 at 06:38 AM.

09-16-2008, 01:48 AM	#427
sidthirteen Registered User Join Date: Jul 2008 Location: riverside,ca Posts: 150	Re: Project "Rock-a-Billy".....Saga Continues..... hey "chief" ! truck's looking good!! what size brake line did you use?5/16? what size fittings?

09-17-2008, 07:02 AM	#428
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... I used stock size fittings and brake line (1/4") __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

09-17-2008, 11:09 AM	#429
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Project "Rock-a-Billy".....Saga Continues..... Are you still gonna paint the grille? ...and when's the hood goin on?

09-17-2008, 12:17 PM	#430
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Project "Rock-a-Billy".....Saga Continues..... Lookin really good. I really like the white top __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=269019 Petitioning No Regrets MD/WV

09-23-2008, 09:18 AM	#432
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... OK, I put the hood...now get off my back will ya !! - - Actually, I only did it because we are remodeling the shop (previous owner permit violations) so I needed a place to store it...so, what better place than back on the truck !! (just laying there, no hinges yet) - - I have to be honest, I am not used to have'n a hood on it....at all. - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 09-23-2008 at 09:19 AM.

09-23-2008, 09:22 AM	#433
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Rock-a-Billy".....Saga Continues..... Im ready to rip mine off and throw a tunnel ram on it!!! Looks good bro!! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

09-23-2008, 11:24 AM	#434
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: Project "Rock-a-Billy".....Saga Continues..... Hey Chief? Have you seen the clear/white hood blinkers? __________________ Build in progress for son's first truck.

09-23-2008, 11:41 AM	#435
Tim64 Registered User Join Date: Aug 2007 Location: Vandalia, Ohio Posts: 396	Re: Project "Rock-a-Billy".....Saga Continues..... Damn John that's one hell of a nice garage ya got there. The truck & car in it are pretty sweet too!

09-23-2008, 01:12 PM	#436
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Project "Rock-a-Billy".....Saga Continues..... I like the hood on it. Last edited by Bazooka; 09-23-2008 at 01:12 PM.

09-23-2008, 02:59 PM	#437
Reyals Bemus Registered User Join Date: Dec 2007 Location: Billerica, MA Posts: 329	Re: Project "Rock-a-Billy".....Saga Continues..... I was just about to say, "Come on, put the hood on..." and then I saw that you did. I think it looks so much nicer with a hood. The truck looks complete with it on. Plus, it keeps your engine bay unexposed to all kinds of crap. If you wanted to show off the engine, just flip the hood... Love the truck!

09-23-2008, 03:03 PM	#438
1974k5blazer Account Suspended Join Date: Dec 2007 Location: Queen Creek AZ Posts: 243	Re: Project "Rock-a-Billy".....Saga Continues..... the spare in the bed is a nice touch!

09-24-2008, 07:11 AM	#440
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project "Rock-a-Billy".....Saga Continues..... John, Glad you told us that's where you stored your cars instead of where you worked on them. I was like dude's shop is cleaner than my house. How's your wife's ride coming along? is she riding yet? __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

09-24-2008, 07:48 AM	#441
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... Well my shop isn't too bad either.....Everything is put on hold right now.....we had to knock down a wall (that wasn't supposed to be there)...and a bunch of other $hit that was wrong with the building (frickin permit laws) - - Here is a current shot of the shop....everything was moved over to knock down walls. Here's a shot of my shop area on the left, and the wall we knocked down yesterday on the right: - - - This was was seperating unusable office space (previous owners, unpermited) from the rest of the wherehouse: - - Now, a 2 hour FIREWALL must be build from the floor all the way up to be legal and satisfy the "man": - - That will be moved 6 feet over, inline with those support beams....kinda like this: - - - Sucks, because it is so nice open like this. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

09-24-2008, 08:45 AM	#442
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project "Rock-a-Billy".....Saga Continues..... John, I run a warehouse here in Memphis and use pallet rack in a bunch of areas. it comes in a bunch of different heights and widths. maybe you guys could run a couple of sections down the wall. it would give you 2 rows of storage and you could hang light fixtures on the bottom and have work areas. here is a pick area in the back of my warehouse. Just an idea. David. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q Last edited by 4dranch; 09-24-2008 at 09:03 AM. Reason: spelling



Register or Log In To remove these advertisements.

09-24-2008, 09:28 AM	#443
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: Project "Rock-a-Billy".....Saga Continues..... Chief, I got my clear lenses thru LMC. They had clear rear lights with LED's, but discontinued them before I could get my hands on them. __________________ Build in progress for son's first truck.

09-24-2008, 10:07 AM	#445
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Project "Rock-a-Billy".....Saga Continues..... I dig the hood! __________________ *CHEVY ONLY*

09-27-2008, 01:24 AM	#446
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: Project "Rock-a-Billy".....Saga Continues..... So does Chief sound like his nose is stopped up now that the hood is on? You know, one good sneeze and the hood will be GONE! Hmm where have I seen that before? Seriously, good looking truck. I know what you mean about stupid oil leaks that should not have happened. All that cleaning wasted. Irritating. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

09-27-2008, 09:32 AM	#447
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... Probably would loose the hood...considering it's just laying there with no hinges !! - - Leaks suck...took care of that with a one-piece seal and a new USA Moroso stock pan. The only leak I have now is just the stock 3-speed, drips after being driven. Not adding oil to it...mabey it'll blow soon, and that'll give me an excuse to throw in the 700R4 ! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-24-2008, 07:56 AM	#448
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... I'm back with nothing much to add...truck just sitting for dust-collecting time...Took it out yesterday to pick up some lunch. - - Won these the other day on E-bay...should arrive soon... - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-24-2008, 08:06 AM	#449
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Project "Rock-a-Billy".....Saga Continues..... I want a set of those too, I like the earlier ones better than the later.

10-24-2008, 08:11 AM	#450
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Project "Rock-a-Billy".....Saga Continues..... I know what you mean... Actually, after I bid on them...I wasn't sure they were for the right year...but I checked and I was relieved. The add listed 60-66...but these are the early ones. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

Register or Log In To remove these advertisements.