Do you need '64-'66 Chevy Truck Parts? - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4dranch · 09-15-2008, 12:10 PM

Are you still dealing with used parts?
If so do you have the following. All for a 1963 305 V6 GMC Long F/S.

1-Radiator
2-Drivers side front fender
3-Set of Chrome Bumpers
4-Tailgate

Could you send prices and maybe a list of other stuff and pictures of
1 through 4.
Live out side of Memphis 38053 zip.

Thanks, David

63Belair · 09-19-2008, 06:41 PM

Looking for the passenger side rear lower shock absorber mount for a 62. I'm not sure if this part was used after 62.

guy man · 09-20-2008, 04:18 PM

would have a 4-speed shifter knob with revers on the left thanks guy

northern 85 · 09-20-2008, 04:26 PM

How about a tach dash for a 64?

Throwback · 09-20-2008, 09:44 PM

Red, I am looking for the following, If you can PM me pics and prices if possible on these and if possile freight prices on these to 70767?

LWB or SWB Fleetside Bed
Both Front Fenders
Hood
Core Support
Hood Hinges
The pieces that go between the Fender and Cowl. don't know what there called.

Thanks and looking forward to your responce.

jason65 · 09-25-2008, 10:19 AM

Tony. I am looking for a good grille support and both doors. Empty shells would be fine. Zip code is 73026.

jason65 · 09-25-2008, 12:16 PM

Sorry. I have a 65 chevy c20.

JoeKan · 09-25-2008, 11:19 PM

Hi Tony,
I know you're selling 4-5-6 parts but I'm wondering if you have an original am radio that will fit my 61?
Thanks for your time,
Joe

northern 85 · 09-26-2008, 05:30 AM

Where are you lilred66?

*LILRED66* · 10-07-2008, 07:07 PM

I have been without internet and e-mail service for a few weeks. I had to borrow a laptop to logon. Sorry for the technical difficulties. I will reply to parts inquiries, as soon as possible.

*LILRED66* · 10-07-2008, 07:08 PM

Quote:

Originally Posted by JoeKan

Hi Tony,
I know you're selling 4-5-6 parts but I'm wondering if you have an original am radio that will fit my 61?
Thanks for your time,
Joe

Joe:

Thanks for the inquiry and sorry for the delay in responding. I don't have any '60-'63 factory radios, at this time. Thanks for your interest and please keep me in mind for other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 10-07-2008, 07:13 PM

Quote:

Originally Posted by guy man

would have a 4-speed shifter knob with revers on the left thanks guy

Guy:

Thanks for the inquiry and sorry for my delay in responding. I have a few factory 4-speed floor shifter knobs, with the factory shift pattern of reverse on the bottom left.

They are in good, original, used condition, with the lettering still visible. How about $15.00, including packaging & shipping, via USPS, Priority Mail?

Please let me know your thoughts about this part and if I can help you with other 4-5-6 Chevy truck items in the future.

*LILRED66* · 10-07-2008, 07:16 PM

Quote:

Originally Posted by northern 85

How about a tach dash for a 64?

Thanks for the inquiry and sorry for my delay in replying. I am out of factory tachs, but they are available online at:

www.classicparts.com
www.lmctruck.com
www.bowtiebits.com

Sorry I couldn't help you with this item, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

northern 85 · 10-07-2008, 07:35 PM

Do you have any pics of factory rear view mirror that you might have in stock?

murdoc · 10-09-2008, 12:58 AM

hey tony, i was wondering if you have a good, clean, functional 3 on the tree steering column for my 65 c-10. mines no good. thanks, nick

tommys66 · 10-13-2008, 10:16 AM

Looking for good doors(empty shells) for 66 C-10.

SCOTI · 10-16-2008, 09:13 AM

Looking for a clean factory 64-66 rear chrome bumper + brackets & a 64 pass side vent window.

283 Man · 10-21-2008, 09:39 AM

Tony,hows things been your way friend? Can you get me pictures of the baby moon rims and tires we talked about? thanks Morton

Norselander · 10-22-2008, 12:21 PM

Hello Tony. Do you have a shortbed spare tire hanger and an accompanying fender?

4dranch · 10-28-2008, 12:07 PM

Hey, Tony
Do you have the sockets for turn signals off of a 63 GMC

*LILRED66* · 10-28-2008, 11:27 PM

Quote:

Originally Posted by 4dranch

Hey, Tony
Do you have the sockets for turn signals off of a 63 GMC

Front or rear?

*LILRED66* · 10-28-2008, 11:28 PM

Quote:

Originally Posted by Norselander

Hello Tony. Do you have a shortbed spare tire hanger and an accompanying fender?

Thanks for the inquiry, however I do not have a stepside driver side fender with a spare tire carrier. Sorry I couldn't help, but please keep in mind for other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 10-28-2008, 11:32 PM

Quote:

Originally Posted by 283 Man

Tony,hows things been your way friend? Can you get me pictures of the baby moon rims and tires we talked about? thanks Morton

Morton:

Good to hear from you...I see you fixed up the '63 and made it your new avatar....

This is the only decent shot I could find of the chrome reverse with baby moon caps. The are all in very good condition with good tread, complete with 4 rims, four caps, four tires and lugs.

Let me know your thoughts and give me an update on your progress with OLEBLUE.

*LILRED66* · 10-28-2008, 11:35 PM

Quote:

Originally Posted by murdoc

hey tony, i was wondering if you have a good, clean, functional 3 on the tree steering column for my 65 c-10. mines no good. thanks, nick

Nick:

Sorry for taking so long to reply. I checked my inventory and my parts trucks and I don't have any three speed on the column steering columns. Sorry I couldn't help you with this item, but please let me know if I can help you with 4-5-6 Chevy truck parts in the future.

SCOTI · 10-28-2008, 11:43 PM

Quote:

Originally Posted by LILRED66

Nick:

Sorry for taking so long to reply. I checked my inventory and my parts trucks and I don't have any three speed on the column steering columns. Sorry I couldn't help you with this item, but please let me know if I can help you with 4-5-6 Chevy truck parts in the future.

Nick, how soon do you need a 3OTT column? I know of a decent working unit in a truck that's getting an auto trans swap. Shipping would be from TX 75041.

09-15-2008, 12:10 PM	#276
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Do you need '64-'66 Chevy Truck Parts? Are you still dealing with used parts? If so do you have the following. All for a 1963 305 V6 GMC Long F/S. 1-Radiator 2-Drivers side front fender 3-Set of Chrome Bumpers 4-Tailgate Could you send prices and maybe a list of other stuff and pictures of 1 through 4. Live out side of Memphis 38053 zip. Thanks, David __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

09-19-2008, 06:41 PM	#277
63Belair Registered User Join Date: Sep 2008 Location: Seattle Washington Posts: 22	Re: Do you need '64-'66 Chevy Truck Parts? Looking for the passenger side rear lower shock absorber mount for a 62. I'm not sure if this part was used after 62.

09-20-2008, 04:18 PM	#278
guy man Registered User Join Date: Mar 2008 Location: middletown ohio Posts: 4	Re: Do you need '64-'66 Chevy Truck Parts? would have a 4-speed shifter knob with revers on the left thanks guy

09-20-2008, 04:26 PM	#279
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Do you need '64-'66 Chevy Truck Parts? How about a tach dash for a 64?

09-20-2008, 09:44 PM	#280
Throwback Registered User Join Date: Jul 2008 Location: Watson LA Posts: 105	Re: Do you need '64-'66 Chevy Truck Parts? Red, I am looking for the following, If you can PM me pics and prices if possible on these and if possile freight prices on these to 70767? LWB or SWB Fleetside Bed Both Front Fenders Hood Core Support Hood Hinges The pieces that go between the Fender and Cowl. don't know what there called. Thanks and looking forward to your responce.

09-25-2008, 10:19 AM	#281
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Do you need '64-'66 Chevy Truck Parts? Tony. I am looking for a good grille support and both doors. Empty shells would be fine. Zip code is 73026.

09-25-2008, 12:16 PM	#282
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Do you need '64-'66 Chevy Truck Parts? Sorry. I have a 65 chevy c20.

09-25-2008, 11:19 PM	#283
JoeKan Registered User Join Date: Jul 2008 Location: Kansas Posts: 707	Re: Do you need '64-'66 Chevy Truck Parts? Hi Tony, I know you're selling 4-5-6 parts but I'm wondering if you have an original am radio that will fit my 61? Thanks for your time, Joe

09-26-2008, 05:30 AM	#284
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Do you need '64-'66 Chevy Truck Parts? Where are you lilred66?

10-07-2008, 07:07 PM	#285
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? I have been without internet and e-mail service for a few weeks. I had to borrow a laptop to logon. Sorry for the technical difficulties. I will reply to parts inquiries, as soon as possible.

10-07-2008, 07:35 PM	#289
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Do you need '64-'66 Chevy Truck Parts? Do you have any pics of factory rear view mirror that you might have in stock?

10-09-2008, 12:58 AM	#290
murdoc Registered User Join Date: Mar 2008 Location: nampa, idaho Posts: 332	Re: Do you need '64-'66 Chevy Truck Parts? hey tony, i was wondering if you have a good, clean, functional 3 on the tree steering column for my 65 c-10. mines no good. thanks, nick

10-13-2008, 10:16 AM	#291
tommys66 Registered User Join Date: Oct 2008 Location: Southern, MO Posts: 233	Re: Do you need '64-'66 Chevy Truck Parts? Looking for good doors(empty shells) for 66 C-10.

10-16-2008, 09:13 AM	#292
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: Do you need '64-'66 Chevy Truck Parts? Looking for a clean factory 64-66 rear chrome bumper + brackets & a 64 pass side vent window. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-21-2008, 09:39 AM	#293
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Do you need '64-'66 Chevy Truck Parts? Tony,hows things been your way friend? Can you get me pictures of the baby moon rims and tires we talked about? thanks Morton



Register or Log In To remove these advertisements.

10-22-2008, 12:21 PM	#294
Norselander Clunker Farm, Proprietor Join Date: Oct 2003 Location: Coastal Northern California Posts: 124	Re: Do you need '64-'66 Chevy Truck Parts? Hello Tony. Do you have a shortbed spare tire hanger and an accompanying fender? __________________ Drew Chief Junk Jockey

10-28-2008, 12:07 PM	#295
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Do you need '64-'66 Chevy Truck Parts? Hey, Tony Do you have the sockets for turn signals off of a 63 GMC __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

Register or Log In To remove these advertisements.