Moving in 4 weeks, everything must go! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alvin · 09-18-2008, 09:28 AM

Quote:

Originally Posted by acl

any brackets with p/s pump? What year off of? am interested if will fit 68. Gary

No brackets with the PS pump, sorry. It was mounted on my 68 GMC, but I do not know if it is correct for the year.

Alvin · 09-18-2008, 09:29 AM

For everybody else that has expressed interest in parts, I have updated the posts to show who is in line for each part. If something isn't right, or I missed somebody please let me know.

Thanks again!

Zumo · 09-18-2008, 10:52 AM

Crap. Is the booster gone?? Put me in line just incase. I

am always late to the game.

jkaylor68gmc · 09-18-2008, 11:00 AM

how about the wiper switch, does it work and do you have any steel door panels?

lo72 · 09-18-2008, 11:09 AM

i need the 68 hood latch and hood latch support. how much plus shipping to 30122?

72swbcamo · 09-18-2008, 11:19 AM

I'm interested in the mirror brackets. I'll PM you.

Alvin · 09-18-2008, 12:43 PM

Quote:

Originally Posted by Zumo

Crap. Is the booster gone?? Put me in line just incase. I

am always late to the game.

Okay, you are in line.

Alvin · 09-18-2008, 12:44 PM

For everyone else, I will get you shipping quotes when I get home from work and can measure the boxes I'll be shipping the parts in.

Thanks!

Alvin · 09-18-2008, 12:45 PM

Quote:

Originally Posted by jkaylor68gmc

how about the wiper switch, does it work and do you have any steel door panels?

I'll have to multi-meter the switch for ya.

I have a pair of steel door panels. I'll have to look and see if they are better than the ones currently on the truck or not. I will let you know.

Thanks!

72BlckButy · 09-18-2008, 01:32 PM

Quote:

Originally Posted by Alvin

$30 shipped

I don't think they're bent, I'll go take another look. I took them off the frame and put them on a shelf. They've been there ever since.

Let me know if that sounds okay.

Thanks!

Quote:

Originally Posted by Alvin

Sure, won't make the box any bigger, really

Hey Adam... it was late last night, and I forgot to ask a couple of questions.

Do the guage panels work? Or to the best of your knowlege work?

Also, I asked earlier about the seat belt retractor covers, are they cracked, or scratched real bad?

And... did you get a chance to look at the sway bar brackets?

Thanks for everything!
Nate

Alvin · 09-18-2008, 02:44 PM

Quote:

Originally Posted by 72BlckButy

Hey Adam... it was late last night, and I forgot to ask a couple of questions.

Do the guage panels work? Or to the best of your knowlege work?

Also, I asked earlier about the seat belt retractor covers, are they cracked, or scratched real bad?

And... did you get a chance to look at the sway bar brackets?

Thanks for everything!
Nate

Both gauges panels were functioning fully when removed from the trucks. One was removed 4 years ago, the other just last year.

I think the retractor covers are really nice. I will take more pics for you after work.

Haven't looked at the brackets yet. As you said it was pretty late last night!

greyghost · 09-18-2008, 05:09 PM

how much for the auto trany crossmember shipped to 36582? Thanks

*1972Ryan* · 09-18-2008, 05:15 PM

interested in mirror arms, auto cross member, manifolds, and brake booster if any of it gets to me shipped to 28787

51 68CHEVY · 09-18-2008, 05:25 PM

how much to ship the automatic cross member,and the trailing arm crossmember to atco,n.j. 08004

eseaton · 09-18-2008, 06:16 PM

do you still have the seat belts? if so whats the shipping to 79102?

Alvin · 09-18-2008, 07:50 PM

Rear springs sold to UP GRADE!

Distributor sold to otsenre!

Washer Jug sold to w314speed!

Thanks guys!

Alvin · 09-18-2008, 07:54 PM

For the transmission and trailing arm crossmembers, it will take another day or so to get quotes together. I'm gonna have to build boxes around them!

Still waiting to hear back from a couple guys at the front of the lines for the seat belts, sway bar brackets, and mirror arms. I'll let the appropriate people know if they're up to bat. As soon as I receive payment for an item, I will delete it's post and add a new post saying it sold (see above).

Thanks!

72BlckButy · 09-18-2008, 08:45 PM

Adam, I will take the seat belts, the sway bar brackets, and the two guage panels for $30 shipped as mentioned earlier. Thanks for getting the extra pics for me!

Let me know what your paypal acct is and I will send payment asap. I'm not sure how long I will be on tonight, so if I don't catch your paypal account this evening, I will send payment as soon as I get home tomorrow night. (paypal is blocked at work...

)

Thanks again for everything!

72BlckButy · 09-18-2008, 09:23 PM

Payment sent!

Thanks again Adam!

tdave00 · 09-18-2008, 09:36 PM

Let me know on the air valve and valve covers and I'll send money ASAP.

desertrat · 09-18-2008, 09:45 PM

Quote:

Originally Posted by Alvin

...I am moving to Las Vegas in 4 short weeks, .....

Moving to Vegas huh? That's my home town, I lived there for almost 30 yrs!
I moved to Pahrump a little over 6 years ago but still drive to vegas everyday for work. Let me know if you need help with anything.

You're project truck is one of my favorites on this board, maybe I'll get to see it up close now

**phase_one** · 09-18-2008, 10:08 PM

If auto trans x member makes it this far I would like it and the mirror brackets 70769

thanks

shaneo2112RUSH · 09-18-2008, 10:12 PM

im going to pass on the booster but thanks and good luck on the sale and move!!!

Alvin · 09-18-2008, 10:20 PM

Mirror arms sold to huero!

Seat belts, sway bar brackets, and both gauge clusters sold to 72BlckButy!

Phew! This is a lot of hard work

Thanks to you all, I'm trying my hardest to get to each of you as quickly as I can and in the right order.

Alvin · 09-18-2008, 10:46 PM

Okay, here is the latest as far as people waiting in line:

Air valves - DA 68, and tdave00
Valve covers - tdave00, 72gord, and gcburdic
Exhaust manifolds - 72gord, and 1972Ryan
Intake manifold - 72gord
Brake booster - Zumo, and 1972Ryan
Trans crossmember - greyghost, 1972Ryan, 51 68CHEVY, and phase_one
Trailing arm crossmember - 51 68CHEVY

Am I missing anybody?

09-18-2008, 09:29 AM	#52
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Moving in 4 weeks, everything must go! For everybody else that has expressed interest in parts, I have updated the posts to show who is in line for each part. If something isn't right, or I missed somebody please let me know. Thanks again! __________________ Ethel - The Legend Continues... Ethel has been sold.

09-18-2008, 10:52 AM	#53
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: Moving in 4 weeks, everything must go! Crap. Is the booster gone?? Put me in line just incase. I am always late to the game. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles Last edited by Zumo; 09-18-2008 at 10:53 AM.

09-18-2008, 11:00 AM	#54
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Moving in 4 weeks, everything must go! how about the wiper switch, does it work and do you have any steel door panels? __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

09-18-2008, 11:09 AM	#55
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: Moving in 4 weeks, everything must go! i need the 68 hood latch and hood latch support. how much plus shipping to 30122?

09-18-2008, 11:19 AM	#56
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: Moving in 4 weeks, everything must go! I'm interested in the mirror brackets. I'll PM you.

09-18-2008, 12:44 PM	#58
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Moving in 4 weeks, everything must go! For everyone else, I will get you shipping quotes when I get home from work and can measure the boxes I'll be shipping the parts in. Thanks! __________________ Ethel - The Legend Continues... Ethel has been sold.

09-18-2008, 05:09 PM	#62
greyghost Registered User Join Date: May 2008 Location: Katy,Tx Posts: 65	Re: Moving in 4 weeks, everything must go! how much for the auto trany crossmember shipped to 36582? Thanks

09-18-2008, 05:15 PM	#63
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: Moving in 4 weeks, everything must go! interested in mirror arms, auto cross member, manifolds, and brake booster if any of it gets to me shipped to 28787

09-18-2008, 05:25 PM	#64
51 68CHEVY Registered User Join Date: Feb 2005 Location: ATCO N.J. Posts: 536	Re: Moving in 4 weeks, everything must go! how much to ship the automatic cross member,and the trailing arm crossmember to atco,n.j. 08004

09-18-2008, 06:16 PM	#65
eseaton Registered User Join Date: Jul 2008 Location: Amarillo, TX Posts: 190	Re: Moving in 4 weeks, everything must go! do you still have the seat belts? if so whats the shipping to 79102?

09-18-2008, 07:50 PM	#66
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Moving in 4 weeks, everything must go! Rear springs sold to UP GRADE! Distributor sold to otsenre! Washer Jug sold to w314speed! Thanks guys! __________________ Ethel - The Legend Continues... Ethel has been sold.

09-18-2008, 07:54 PM	#67
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Moving in 4 weeks, everything must go! For the transmission and trailing arm crossmembers, it will take another day or so to get quotes together. I'm gonna have to build boxes around them! Still waiting to hear back from a couple guys at the front of the lines for the seat belts, sway bar brackets, and mirror arms. I'll let the appropriate people know if they're up to bat. As soon as I receive payment for an item, I will delete it's post and add a new post saying it sold (see above). Thanks! __________________ Ethel - The Legend Continues... Ethel has been sold.

09-18-2008, 08:45 PM	#68
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Moving in 4 weeks, everything must go! Adam, I will take the seat belts, the sway bar brackets, and the two guage panels for $30 shipped as mentioned earlier. Thanks for getting the extra pics for me! Let me know what your paypal acct is and I will send payment asap. I'm not sure how long I will be on tonight, so if I don't catch your paypal account this evening, I will send payment as soon as I get home tomorrow night. (paypal is blocked at work... ) Thanks again for everything! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 09-18-2008 at 08:50 PM.

09-18-2008, 09:23 PM	#69
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Moving in 4 weeks, everything must go! Payment sent! Thanks again Adam! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-18-2008, 09:36 PM	#70
tdave00 Restoring a 68 SWB Join Date: Jan 2008 Location: Nashville, TN Posts: 1,068	Re: Moving in 4 weeks, everything must go! Let me know on the air valve and valve covers and I'll send money ASAP. __________________ My Build Thread: Lucy - My 1968 SWB - Shop Truck Style North Nashville Concrete Contractor



Register or Log In To remove these advertisements.

09-18-2008, 10:08 PM	#72
phase_one Registered User Join Date: Jul 2001 Location: Praireville. LA 70769 Posts: 390	Re: Moving in 4 weeks, everything must go! If auto trans x member makes it this far I would like it and the mirror brackets 70769 thanks __________________ 11 Surbaban 70 C 10 still in progress

09-18-2008, 10:12 PM	#73
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: Moving in 4 weeks, everything must go! im going to pass on the booster but thanks and good luck on the sale and move!!! __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

09-18-2008, 10:20 PM	#74
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Moving in 4 weeks, everything must go! Mirror arms sold to huero! Seat belts, sway bar brackets, and both gauge clusters sold to 72BlckButy! Phew! This is a lot of hard work Thanks to you all, I'm trying my hardest to get to each of you as quickly as I can and in the right order. __________________ Ethel - The Legend Continues... Ethel has been sold.

09-18-2008, 10:46 PM	#75
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Moving in 4 weeks, everything must go! Okay, here is the latest as far as people waiting in line: Air valves - DA 68, and tdave00 Valve covers - tdave00, 72gord, and gcburdic Exhaust manifolds - 72gord, and 1972Ryan Intake manifold - 72gord Brake booster - Zumo, and 1972Ryan Trans crossmember - greyghost, 1972Ryan, 51 68CHEVY, and phase_one Trailing arm crossmember - 51 68CHEVY Am I missing anybody? __________________ Ethel - The Legend Continues... Ethel has been sold. Last edited by Alvin; 09-19-2008 at 08:55 AM.

Register or Log In To remove these advertisements.