$999 for a Dropmember - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jkaylor68gmc · 09-19-2008, 11:30 AM

hells yeah!

revn67 · 09-19-2008, 12:21 PM

is that bill nye the science guy pedalling a bike while drinking a glass of vodka on the rocks? lol

leftcoast66 · 09-19-2008, 03:59 PM

Quote:

Originally Posted by revn67

is that bill nye the science guy pedalling a bike while drinking a glass of vodka on the rocks? lol

God I miss junior high and elementary science class. Bill Nye all the time. Yeah that's bill nye, I'm curious if that is actually vodka in the back haha.

shaneo2112RUSH · 09-19-2008, 05:28 PM

Quote:

Originally Posted by leftcoast66

God I miss junior high and elementary science class. Bill Nye all the time. Yeah that's bill nye, I'm curious if that is actually vodka in the back haha.

looks like grey goose bottles!!

they use the bicycles and generators to provide power for the big tv in the back, power the lights and the blender for mixed drinks.

5150 · 09-20-2008, 05:10 AM

hey nate, I live about 1/2 mile from csbatey. If you can have ups drop it at my house when he's not home for delivery. I'll make sure he gets it

mullit · 09-20-2008, 09:34 AM

Just ordered mine, cant wait

*FormerMember* · 09-20-2008, 10:03 AM

Price for a DM, suitable control arms and coil over shocks shipped to 03036? (basically, I'd like a complete package).

Do you sell the racks and schtuff?

Don't want to run bags.

SantanaCustoms · 09-20-2008, 03:34 PM

I know the DM can be used with stock arms or ART arms, but does anyone know about chassis tech arms working with the kit? Not sure if this has ever been asked and I know the quality isn't as good as ART, however it could be a cost save for people on a tight budget.

SCOTI · 09-20-2008, 04:46 PM

Quote:

Originally Posted by SantanaCustoms

I know the DM can be used with stock arms or ART arms, but does anyone know about chassis tech arms working with the kit? Not sure if this has ever been asked and I know the quality isn't as good as ART, however it could be a cost save for people on a tight budget.

Pay up front for better quality or pay later to correct problems from lesser quality (or wrong parts being sent etc . . ....). Is it worth the frustration?

If your budget is tight, why not just use the OE arms w/suitable adapters for the bags (cups or plates) vs. taking the risk on a company (AIM/Chassis Tech, AirBagIt.com) that is unfortunately known for issues?

smashingchuck · 09-20-2008, 06:28 PM

Dropmember = incompatible with AIM parts

SantanaCustoms · 09-20-2008, 07:08 PM

Quote:

Originally Posted by SCOTI

Pay up front for better quality or pay later to correct problems from lesser quality (or wrong parts being sent etc . . ....). Is it worth the frustration?

If your budget is tight, why not just use the OE arms w/suitable adapters for the bags (cups or plates) vs. taking the risk on a company (AIM/Chassis Tech, AirBagIt.com) that is unfortunately known for issues?

I totally agree with the reputation of AIM, just giving people an option.

PBFAB.COM · 09-20-2008, 11:50 PM

Quote:

Originally Posted by grendel

Price for a DM, suitable control arms and coil over shocks shipped to 03036? (basically, I'd like a complete package).

Do you sell the racks and schtuff?

Don't want to run bags.

I am currently working on this same set-up for another customer. As soon as I get all the details lined out, I will post up the information.

PBFAB.COM · 09-20-2008, 11:50 PM

Quote:

Originally Posted by smashingchuck

Dropmember = incompatible with AIM parts

Or SD arms.... (when they start making them).

The Dropmember will work with factory arms (need to purchase a set of plates from me, or do your own modifications for bag mount).
The Dropmember will work with ART arms (lower bag mounting hole needs to be relocated 1.25" outboard)

The Dropmember will NOT work with any aftermarket upper control arm that has been lengthened from factory specs. There are a few companies that have lengthened their replacement C10 upper control arms to compensate for the factory camber issues when lowering these trucks. The Dropmember has completely revised the suspension geometry and will NOT work with these lengthened upper control arms.

SCOTI · 09-20-2008, 11:56 PM

Quote:

Originally Posted by porterbuilt

Or SD arms.... (when they start making them).

Maybe they're waiting on some 'inspiration'

.

PBFAB.COM · 09-21-2008, 12:11 AM

Quote:

Originally Posted by SCOTI

Maybe they're waiting on some 'inspiration'

.

I have the design portion done... just can't seem to find the time to get some built, test them, and then build the jigs.

I have another new product that is taking priority right now... should be ready to release it within a couple weeks... the suspense!

jasonb72 · 09-21-2008, 12:47 AM

Jeopardy theme music is playing now........

Quote:

Originally Posted by porterbuilt

I have the design portion done... just can't seem to find the time to get some built, test them, and then build the jigs.

I have another new product that is taking priority right now... should be ready to release it within a couple weeks... the suspense!

*FormerMember* · 09-21-2008, 08:28 AM

Quote:

Originally Posted by porterbuilt

I am currently working on this same set-up for another customer. As soon as I get all the details lined out, I will post up the information.

Thanks. If I run a DM, no way would I want to put stock arms on it.

crawdadfox · 09-21-2008, 11:34 AM

Hey Nate, at $999.00 you better hire some help!!!! I know they will be flying out the door!!!!

SCOTI · 09-21-2008, 12:40 PM

Quote:

Originally Posted by porterbuilt

I have the design portion done... just can't seem to find the time to get some built, test them, and then build the jigs.

I have another new product that is taking priority right now... should be ready to release it within a couple weeks... the suspense!

Of course.... If you need some help w/the testing portion of your product evaluation, I'm sure you could find one or two volunteers around here

.

Riveted1 · 09-21-2008, 02:28 PM

*Raises Hand* *Raises Hand REAL HIGH and Waves*

5150 · 09-21-2008, 03:03 PM

Pick Me, Pick Me, Pick Me, Pick Me, Pick Me, Pick Me

killerpickup · 09-21-2008, 03:21 PM

Really happy to hear your constantly trying to upgrade your product. The first time I saw it in classic truck mag. I was impressed. Nice to know your trying to be cost effective. I have a question, Ive already done a Z on my 77 shortbox, and I also notched the crossmember and dropped the tyrod to keep from cutting up the floor. Does this sound like a safe method to you? Iam a good welder, but I would still like your point of veiw.

PBFAB.COM · 09-22-2008, 03:01 PM

Quote:

Originally Posted by killerpickup

Really happy to hear your constantly trying to upgrade your product. The first time I saw it in classic truck mag. I was impressed. Nice to know your trying to be cost effective. I have a question, Ive already done a Z on my 77 shortbox, and I also notched the crossmember and dropped the tyrod to keep from cutting up the floor. Does this sound like a safe method to you? Iam a good welder, but I would still like your point of veiw.

I am by no means a fan or advocate of "Zing" the frame (no surprise). There are numerous reasons that make the thought of a Z unattractive. However, it can be done, and it can be done safely. I would like to see some pics of the work, and then can give you my honest opinion.

The main concern when doing a "Z" is the structural integrity, second, and not far behind, is the steering geometry. Too often people Z the frame or section the crossmember and forget about the steering geometry. It all has to work in unison in order to have a comfortabl/safe ride.

c10addict · 09-22-2008, 04:56 PM

I probably have a 1000 miles on the dropmembered 64 I just bought... Trust me you want one!! GREAT PRODUCT!!! Hats off to you Nate!! I will be putting one on my 68 in the near future! Spend the cash boys and buy one and trust you me you will love it!!

Custom 68 · 09-22-2008, 10:36 PM

ok this may be answered already maybe in another thread if so point me there... does this change (decrease) the track width? my track in the front is too wide after my disk upgrade. I being on a budget would use my stock arms sounds like this changes the geoetry to make the truck handle better.
Secondly with a name like "drop member" does this change or drop the front ride height? sounds like it would but dont know? Again I would use my static drop spindles and static springs? I need the rack and pinion steering but will all this work together?
thanks in advance
Dave

09-19-2008, 11:30 AM	#51
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: $999 for a Dropmember hells yeah! __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

09-19-2008, 12:21 PM	#52
revn67 Registered User Join Date: Jul 2005 Location: east longmeadow, MA Posts: 540	Re: $999 for a Dropmember is that bill nye the science guy pedalling a bike while drinking a glass of vodka on the rocks? lol __________________ 67 small windowed,shortbed,fleetside, sbc 327, th350,12 bolt :under the knife: 71 cab for sale in parts classifieds! 2004 black chevy 1500 "finish your beer, theres sober kids in india!"

09-20-2008, 05:10 AM	#55
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: $999 for a Dropmember hey nate, I live about 1/2 mile from csbatey. If you can have ups drop it at my house when he's not home for delivery. I'll make sure he gets it __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-20-2008, 09:34 AM	#56
mullit Registered User Join Date: Jan 2007 Location: connecticut Posts: 127	Re: $999 for a Dropmember Just ordered mine, cant wait

09-20-2008, 10:03 AM	#57
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: $999 for a Dropmember Price for a DM, suitable control arms and coil over shocks shipped to 03036? (basically, I'd like a complete package). Do you sell the racks and schtuff? Don't want to run bags.

09-20-2008, 03:34 PM	#58
SantanaCustoms Registered User Join Date: Oct 2006 Location: Gilbert, AZ / La Verne, CA Posts: 17	Re: $999 for a Dropmember I know the DM can be used with stock arms or ART arms, but does anyone know about chassis tech arms working with the kit? Not sure if this has ever been asked and I know the quality isn't as good as ART, however it could be a cost save for people on a tight budget.

09-20-2008, 06:28 PM	#60
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: $999 for a Dropmember Dropmember = incompatible with AIM parts __________________ 78 Build Thread 4Runner Build

09-21-2008, 11:34 AM	#68
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: $999 for a Dropmember Hey Nate, at $999.00 you better hire some help!!!! I know they will be flying out the door!!!!

09-21-2008, 02:28 PM	#70
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: $999 for a Dropmember Raises Hand Raises Hand REAL HIGH* and Waves* __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

09-21-2008, 03:03 PM	#71
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: $999 for a Dropmember Pick Me, Pick Me, Pick Me, Pick Me, Pick Me, Pick Me __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-21-2008, 03:21 PM	#72
killerpickup Registered User Join Date: Aug 2008 Location: Seabeck WA. Posts: 20	Re: $999 for a Dropmember Really happy to hear your constantly trying to upgrade your product. The first time I saw it in classic truck mag. I was impressed. Nice to know your trying to be cost effective. I have a question, Ive already done a Z on my 77 shortbox, and I also notched the crossmember and dropped the tyrod to keep from cutting up the floor. Does this sound like a safe method to you? Iam a good welder, but I would still like your point of veiw.

09-22-2008, 04:56 PM	#74
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: $999 for a Dropmember I probably have a 1000 miles on the dropmembered 64 I just bought... Trust me you want one!! GREAT PRODUCT!!! Hats off to you Nate!! I will be putting one on my 68 in the near future! Spend the cash boys and buy one and trust you me you will love it!! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

09-22-2008, 10:36 PM	#75
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,939	Re: $999 for a Dropmember ok this may be answered already maybe in another thread if so point me there... does this change (decrease) the track width? my track in the front is too wide after my disk upgrade. I being on a budget would use my stock arms sounds like this changes the geoetry to make the truck handle better. Secondly with a name like "drop member" does this change or drop the front ride height? sounds like it would but dont know? Again I would use my static drop spindles and static springs? I need the rack and pinion steering but will all this work together? thanks in advance Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.