![]() |
![]() |
#51 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,981
|
NSANE from this board sells some I believe for about 100$ @ phatcustoms.com or you can prob get different brackets from air-ride. If your skills are challenged (or if you don't have the tools)you could go w/a 2-wheel installer kit for these trucks for the front & do the rears yourself. Several companies sell a shock relocator kit/adj panhard bar for the rear & the rest is R & R. Good luck.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#52 |
Carolina Classic Trucks
Join Date: Jan 2000
Location: The South
Posts: 792
|
I have the ECE kit on the back of my truck. I also sell their kit. The rear kit comes with everything except a c notch. The kit includes the 2 bags, lines, fittings, adj. super trac bar (this bar goes from the factory location on the frame to the passenger side U bolt), shock relocator kit, 2 kyb shocks, new U bolts and all hardware. This kit works great and is a true bolt on kit. This complete kit is $629.95 plus shipping. I also carry their compressor, tank, guage and switch for $340.95 plus shipping. For those of you that dont know, ECE = Early Classic Enterprises.
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#53 |
Registered User
Join Date: Jun 2000
Location: Chico, CA
Posts: 1,136
|
I have the know-how....... but I can't do jack with what I have rightnow. All I have is one of those bazillion piece Craftsman tool sets..... so basically i just have wrenches/sockets, but nothing to do metal fab 'cept for an angle grinder. I've seen installer kits for the front going for $500 plus, I didn't want to pay that for a couple brackets, bags, and shocks...... well at least I know I can get the brackets. I have the adjustable tracking arm, I still need to get the shock mounts relocated in the back. Thanks for your help SCOTI.
__________________
My engine is stock... trust me ;o) |
![]() |
![]() |
![]() |
#54 | |
Registered User
Join Date: May 2002
Location: Huntington Beach CA
Posts: 678
|
Quote:
www.innovativeairsuspension.com you probably wont find them on the website so youll have to call. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|