|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-28-2008, 11:01 AM
|
#1 |
|
Registered User
Join Date: Dec 2004
Location: Central Wisconsin
Posts: 1,317
|
Stock Proportioning valve
Heres what I want to use on my 69 step---I converted it to disk front only(from a 85) and I want to use a stock master and booster from the 71 type for disk-drum combo.I can buy the stock type for under $100 but I cannot find a stock type proportioning valve anywhere,anyone actually know where I can buy one? Thanks Chip
|
|
|
|
10-28-2008, 11:35 AM
|
#2 |
|
It's a catastrophic success.
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Re: Stock Proportioning valve
If your local parts store dont have one
http://www.inlinetube.com/Prop%20Valves/pro_valves.htm |
|
|
|
|
10-29-2008, 08:31 AM
|
#3 |
|
"THE GREEN GOBLIN"
Join Date: Mar 2008
Location: Fremont Ca.
Posts: 1,025
|
Re: Stock Proportioning valve
X2 InlineTube
__________________
 Petey-pablo"THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi  SoldDrive it like you stole it!  Petey-pablo@sbcglobal.net |
|
|
|
|
10-29-2008, 08:51 AM
|
#4 | |
|
Senior Member
Join Date: May 2002
Location: Hammond, WI
Posts: 1,816
|
Re: Stock Proportioning valve
IIRC i got mine from ECE: http://www.earlyclassic.com/catalog.aspx
__________________
Mike 2001 Dakota R/T - Silver CC - 1 of 1671 •360 w/46RE •392 limited slip 1972 Chevy Suburban - Turquoise/Black 1969 Chevy C/10 - Blue LWB •350 w/ 700R4 •3.73 posi •PS PB A/C - SOLD  Using your turn signal is not "giving information to the enemy" 67-72 FAQ Quote:
Last edited by nightmare; 10-29-2008 at 08:52 AM. |
|
|
|
|
|
10-29-2008, 09:01 AM
|
#5 | |
|
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: Stock Proportioning valve
Quote:
|
|
|
|
|
|
10-30-2008, 11:42 AM
|
#6 |
|
Registered User
Join Date: Mar 2007
Location: Ben Wheeler,Texas
Posts: 992
|
Re: Stock Proportioning valve
Mike's bump and grind here on the board was the most reasonably priced when I did my drum to disc swap. I di get my lines from inline though.
__________________
05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd |
|
|
|
|
10-30-2008, 02:27 PM
|
#7 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,031
|
Re: Stock Proportioning valve
I tried repeatedly to re-set the prop-valve on my 74 following instructions from here but it wouldn't work so I just got a new one & haven't had a prob since (7-07). I used Inline-Tubes valve & 4pc front stainless hardline kit.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
