FS: LWB rolling chassis with bed and more (Houston) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AGRV8D · 10-30-2008, 04:45 PM

1970 LWB roller no cab, some front end parts included (not the bumper). Has a decent bed. $50 might need to bring fix a flat to get it on a trailer

1970 Saginaw 3 spd.... seems to go into the gears fine, but never used it. $100 bucks

1970 high nickel 350 complete with everything in picture. needs rebuild $250

Also the bench seat in the picture could go too, just make an offer. time to clean up the storage and make room for business materials....

Not sure if these prices are "fair" or on par, but i am not greedy just did not do research on what these things complete would go for. Everything is negotiable and cash is king.

Some parts have been robbed off the bed, but most all is there.

AGRV8D · 10-31-2008, 11:50 AM

are my prices too high>?

NWD02 · 11-01-2008, 12:14 PM

I think it's the ugly guy in the pictures. HAHA, good luck selling it Josh.

AGRV8D · 11-03-2008, 10:49 AM

who is shawn?

Somebody make an offer on it all together....

NWD02 · 11-03-2008, 01:35 PM

Sorry another board member I talk too, I get yall confussed sometime.

jorgensensc · 11-03-2008, 02:04 PM

Is that right? I think I am much prettier. Maybe not as manly, but prettier!

SHawn

AGRV8D · 11-07-2008, 03:07 PM

alrighty then.... the roller with the bed is 50 bucks... make an offer on the motor/tranny.... if you get all of it i will make a deal

AGRV8D · 11-10-2008, 10:49 AM

bump.... anyone need extra parts for there projects?

one last time before i go over and strip everything and part out

NWD02 · 11-10-2008, 08:30 PM

I think I found a buyer... as long as the ugly guy in the picture isn't included.

**phase_one** · 11-10-2008, 09:23 PM

pm sent

AGRV8D · 11-11-2008, 01:32 PM

Nick, let me know whats going on with the buyer. Phase, you are next. if nick falls through, then i will hold for you.

AGRV8D · 11-14-2008, 12:49 PM

bump... anyone needs small parts off the truck please post up....

NWD02 · 11-14-2008, 10:08 PM

Go ahead and let him have it, help a board member out, the guy I know said he's not sure when he could pick it up.

"Always Support the Members", haha.

ashx2 · 11-14-2008, 10:34 PM

I'd like to see the tailgate and sides of the bed. I'll pm you my email address.

Thanks,
Greg

NWD02 · 11-19-2008, 11:23 PM

dibs on the bench. I'll call you tomorrow.

AGRV8D · 11-20-2008, 12:05 PM

sounds good

last chance before the roller gets taken to the crusher

AGRV8D · 11-21-2008, 10:50 AM

this stuff is being taken to the scrap yard tomorrow, if anyone needs it let me know by tonight.

feel free to call me at 832 262 6812, if i do not answer just leave a message.

Josh

10-30-2008, 04:45 PM	#1
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	FS: LWB rolling chassis with bed and more (Houston) 1970 LWB roller no cab, some front end parts included (not the bumper). Has a decent bed. $50 might need to bring fix a flat to get it on a trailer 1970 Saginaw 3 spd.... seems to go into the gears fine, but never used it. $100 bucks 1970 high nickel 350 complete with everything in picture. needs rebuild $250 Also the bench seat in the picture could go too, just make an offer. time to clean up the storage and make room for business materials.... Not sure if these prices are "fair" or on par, but i am not greedy just did not do research on what these things complete would go for. Everything is negotiable and cash is king. Some parts have been robbed off the bed, but most all is there. __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread Last edited by AGRV8D; 11-07-2008 at 03:26 PM.

10-31-2008, 11:50 AM	#2
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	Re: FS: LWB rolling chassis with bed and more (Houston) are my prices too high>? __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread

11-01-2008, 12:14 PM	#3
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: FS: LWB rolling chassis with bed and more (Houston) I think it's the ugly guy in the pictures. HAHA, good luck selling it Josh. Last edited by NWD02; 11-03-2008 at 01:35 PM.

11-03-2008, 10:49 AM	#4
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	Re: FS: LWB rolling chassis with bed and more (Houston) who is shawn? Somebody make an offer on it all together.... __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread

11-03-2008, 01:35 PM	#5
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: FS: LWB rolling chassis with bed and more (Houston) Sorry another board member I talk too, I get yall confussed sometime.

11-03-2008, 02:04 PM	#6
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: FS: LWB rolling chassis with bed and more (Houston) Is that right? I think I am much prettier. Maybe not as manly, but prettier! SHawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-07-2008, 03:07 PM	#7
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	Re: FS: LWB rolling chassis with bed and more (Houston) alrighty then.... the roller with the bed is 50 bucks... make an offer on the motor/tranny.... if you get all of it i will make a deal __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread

11-10-2008, 10:49 AM	#8
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	Re: FS: LWB rolling chassis with bed and more (Houston) bump.... anyone need extra parts for there projects? one last time before i go over and strip everything and part out __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread

11-10-2008, 08:30 PM	#9
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: FS: LWB rolling chassis with bed and more (Houston) I think I found a buyer... as long as the ugly guy in the picture isn't included.

11-10-2008, 09:23 PM	#10
phase_one Registered User Join Date: Jul 2001 Location: Praireville. LA 70769 Posts: 390	Re: FS: LWB rolling chassis with bed and more (Houston) pm sent __________________ 11 Surbaban 70 C 10 still in progress

11-11-2008, 01:32 PM	#11
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	Re: FS: LWB rolling chassis with bed and more (Houston) Nick, let me know whats going on with the buyer. Phase, you are next. if nick falls through, then i will hold for you. __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread

11-14-2008, 12:49 PM	#12
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	Re: FS: LWB rolling chassis with bed and more (Houston) bump... anyone needs small parts off the truck please post up.... __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread

11-14-2008, 10:08 PM	#13
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: FS: LWB rolling chassis with bed and more (Houston) Go ahead and let him have it, help a board member out, the guy I know said he's not sure when he could pick it up. "Always Support the Members", haha.

11-14-2008, 10:34 PM	#14
ashx2 Registered User Join Date: Aug 2008 Location: Graham, Texas Posts: 239	Re: FS: LWB rolling chassis with bed and more (Houston) I'd like to see the tailgate and sides of the bed. I'll pm you my email address. Thanks, Greg

11-19-2008, 11:23 PM	#15
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: FS: LWB rolling chassis with bed and more (Houston) dibs on the bench. I'll call you tomorrow.



Register or Log In To remove these advertisements.

11-20-2008, 12:05 PM	#16
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	Re: FS: LWB rolling chassis with bed and more (Houston) sounds good last chance before the roller gets taken to the crusher __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread Last edited by AGRV8D; 11-20-2008 at 12:09 PM.

11-21-2008, 10:50 AM	#17
AGRV8D Regular Confuser Join Date: Aug 2005 Location: Highlands, Texas Posts: 197	Re: FS: LWB rolling chassis with bed and more (Houston) this stuff is being taken to the scrap yard tomorrow, if anyone needs it let me know by tonight. feel free to call me at 832 262 6812, if i do not answer just leave a message. Josh __________________ My Stuff Surgeon General never said anything about smokin' Fords. Build Thread Last edited by AGRV8D; 11-21-2008 at 10:51 AM.

Register or Log In To remove these advertisements.