Corvette Suspension in 1966 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chenders246 · 11-10-2008, 09:19 PM

I've been searching but couldn't find any info. I want to put a C4 (85-87) ifs and irs under my 66 C20. There are tons of companies that make kits for the 54-59 and the same ones make kits for the 67-72. So the 60-66 must be the bastard, step-child. Can the Flat Out kits be used in the 66? How different are the frames (width or rails, width hub to hub of front, rear etc.) Thanks in advance for your many responses, and if there's already a thread on please direct me.

RunninLo · 11-11-2008, 03:40 AM

check out www.porterbuiltstreetrods.com I'm pretty sure both his regular and C4 cross-member kits go all the way back to 1960 and all the way up to 1987. You will never find a better contact in the automotive industry. I have purchased a few of the products from him and cust. service/ after sale care are second to none. You can also get lots of info in the suspension forum as he's a regular poster here and a site supporting vendor.

Josh

66shortwide · 11-11-2008, 05:58 PM

I'm using the FlatOut Engineering kit for the front and waiting for him to finish the kit up for the rear.

low64 · 11-24-2008, 01:01 PM

not mine, not a 66 but here a picture of a 62 with corvette irs.

11-10-2008, 09:19 PM	#1
chenders246 Registered User Join Date: Nov 2008 Location: San Diego, CA Posts: 1	Corvette Suspension in 1966 I've been searching but couldn't find any info. I want to put a C4 (85-87) ifs and irs under my 66 C20. There are tons of companies that make kits for the 54-59 and the same ones make kits for the 67-72. So the 60-66 must be the bastard, step-child. Can the Flat Out kits be used in the 66? How different are the frames (width or rails, width hub to hub of front, rear etc.) Thanks in advance for your many responses, and if there's already a thread on please direct me.

11-11-2008, 03:40 AM	#2
RunninLo 3DrDwn--the 'burb not the band Join Date: Jan 2007 Location: missoula, mt Posts: 598	Re: Corvette Suspension in 1966 check out www.porterbuiltstreetrods.com I'm pretty sure both his regular and C4 cross-member kits go all the way back to 1960 and all the way up to 1987. You will never find a better contact in the automotive industry. I have purchased a few of the products from him and cust. service/ after sale care are second to none. You can also get lots of info in the suspension forum as he's a regular poster here and a site supporting vendor. Josh __________________ Slo and Lo that is the tempo. '72 burb build page here: http://67-72chevytrucks.com/vboard/s...d.php?t=259256 '89 GMC Dually crew build page coming soon. 88 4x4 crew DD duallys past/present pics here: http://67-72chevytrucks.com/vboard/s...46#post4001246 89 1 ton Dually rear flip kit install here: http://67-72chevytrucks.com/vboard/s...d.php?t=354327

11-11-2008, 05:58 PM	#3
66shortwide Registered User Join Date: Jan 2007 Location: Hammond, LA Posts: 118	Re: Corvette Suspension in 1966 I'm using the FlatOut Engineering kit for the front and waiting for him to finish the kit up for the rear.

11-24-2008, 01:01 PM	#4
low64 Registered User Join Date: Nov 2008 Location: tucson , az Posts: 23	Re: Corvette Suspension in 1966 not mine, not a 66 but here a picture of a 62 with corvette irs. __________________ i own 2 64 swb 62 impala http://i200.photobucket.com/albums/a...010003-1-2.jpg Last edited by low64; 11-24-2008 at 01:07 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.