Where can I find these ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GOPAPA · 11-29-2008, 07:35 PM

I cannot locate these clamps at auto parts or any other stores so far ,,so if any one has a place one can buy these I would apprectiate to know where .

I also cannot find this hose fitting with a 45% bend .

Both of these items are for my gas tank /filler tube and the clamps are from what I believe is original from the factory.
papa

Attachment 407505

ratrod67 · 11-29-2008, 07:47 PM

Go to Yearone and type Wittek hose clamp into the search.

big_al_71 · 11-29-2008, 07:59 PM

the 45 degree elbow you can get in any ACE hardware....the clamps I seen them before in vehicles I just used the regular ones..

weav1 · 11-29-2008, 08:02 PM

The fitting appears to be a 90 degree

Brad · 11-29-2008, 10:16 PM

You might be able to find the fitting at Parkrose Hardware on Sandy Blvd in Portland. I'd look for you but I'm leaving town for 2 weeks. The clamps should be found at restoration shops in Portland as well.

Musclerodz · 11-29-2008, 10:35 PM

Resto house only on the clamps. Try ACE in th plumbing isle on the fitting.

drivethechevy · 11-29-2008, 10:39 PM

yup those clamps are the original clamps, ive colected enough to do about half of my engine compartment, but those have all been junk yard finds or pulled of my own trucks, i havent found anyone that sells new clamps like these but ive never spent to much time looking for them either i hope you find a place to buy them

sameyrasmea72 · 11-30-2008, 01:05 AM

Those are just old style hose clamps, but if you need them because you want your truck to look original, I got mine at classic industries.

petey-pablo · 11-30-2008, 03:01 AM

Summit has the Fittings, I know AutoZone Auto Parts has them too for sure but dont ask them at the counter cause they will tell you they don't carry them and to go to the Junkyard. Or take your sample with you so they can see it.. I know Cuz thats what I was told so . And after haveing orderd from Summit a week later I found them on the shelf The Brand is Spectre I think thats the brand and they are crome
Trans-Dapt Performance Products 2271 $8.39
Brand: Trans-Dapt Performance Products
Part Number: TRD-2271
Fitting, 90 Degree, 3/8 in. Hose Barb to 3/8 in. Male NPT, Brass, Each

GOPAPA · 11-30-2008, 12:56 PM

Quote:

Originally Posted by ratrod67

Go to Yearone and type Wittek hose clamp into the search.

Perfect suggestion and with pictures too.. thx

GOPAPA · 11-30-2008, 01:06 PM

Quote:

Originally Posted by petey-pablo

Summit has the Fittings, I know AutoZone Auto Parts has them too for sure but dont ask them at the counter cause they will tell you they don't carry them and to go to the Junkyard. Or take your sample with you so they can see it.. I know Cuz thats what I was told so . And after haveing orderd from Summit a week later I found them on the shelf The Brand is Spectre I think thats the brand and they are crome
Trans-Dapt Performance Products 2271 $8.39
Brand: Trans-Dapt Performance Products
Part Number: TRD-2271
Fitting, 90 Degree, 3/8 in. Hose Barb to 3/8 in. Male NPT, Brass, Each

Good advice ,,if i cannot find the 45% fitting locally then I will order from summit as they have the clamps for sure .. I have checked with car quest and Napa and neither have them so I will look some more at other parts places and if nothing ,,then I will order by catalog I guess .. thx papa

72BLUZ · 11-30-2008, 05:09 PM

Quote:

Originally Posted by weav1

The fitting appears to be a 90 degree

it also looks to be 1/2 inch pipe thread with 3/8 barb fitting.

**WIDESIDE72** · 11-30-2008, 08:55 PM

Quote:

Originally Posted by ratrod67

Go to Yearone and type Wittek hose clamp into the search.

I bought a full set last year from YearOne for my dad's 71 GMC

71 super · 11-30-2008, 09:01 PM

The clamps are available from Ricks First generation Camaro in Georgia, Danchuk manufacturing, NPD (national parts depot)and just about any car repop vender. Look for Impala or Camaro/ Chevelle suppliers the tower clamps as they are commonly called can be bought in complete sets for roughly $25, you will still need a couple extra for heater/ac applications. There are also specific clamps for power steering and gas clamps (a side clamp application) which are also available. These places also offer corbin style clamps for the 67/68 crowd if looking for 100 % correct restore. These places (usually car places especially camaro suppliers) have many, many items that are correct for the engine compartment for our trucks. I have researched alot of the engine detail pieces, for both BB and Sb trucks and these places all offer good service and quality parts. Hope this helps and if any questions let me know. Harold

11-29-2008, 07:35 PM	#1
GOPAPA Senior Member Join Date: Oct 2007 Location: Nampa Idaho Posts: 7,551	Where can I find these ? I cannot locate these clamps at auto parts or any other stores so far ,,so if any one has a place one can buy these I would apprectiate to know where . I also cannot find this hose fitting with a 45% bend . Both of these items are for my gas tank /filler tube and the clamps are from what I believe is original from the factory. papa Attachment 407505 __________________ When you learn a thing a day you store up smart. Last edited by GOPAPA; 12-05-2008 at 04:05 PM.

11-29-2008, 07:47 PM	#2
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,270	Re: Where can I find these ? Go to Yearone and type Wittek hose clamp into the search.

11-29-2008, 07:59 PM	#3
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Where can I find these ? the 45 degree elbow you can get in any ACE hardware....the clamps I seen them before in vehicles I just used the regular ones.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-29-2008, 08:02 PM	#4
weav1 Registered User Join Date: Feb 2007 Location: plainfield indiana Posts: 283	Re: Where can I find these ? The fitting appears to be a 90 degree Last edited by weav1; 11-29-2008 at 08:03 PM.

11-29-2008, 10:16 PM	#5
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: Where can I find these ? You might be able to find the fitting at Parkrose Hardware on Sandy Blvd in Portland. I'd look for you but I'm leaving town for 2 weeks. The clamps should be found at restoration shops in Portland as well. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

11-29-2008, 10:35 PM	#6
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: Where can I find these ? Resto house only on the clamps. Try ACE in th plumbing isle on the fitting. __________________ Mike Redpath

11-29-2008, 10:39 PM	#7
drivethechevy Registered User Join Date: May 2007 Location: Buffalo MN Posts: 606	Re: Where can I find these ? yup those clamps are the original clamps, ive colected enough to do about half of my engine compartment, but those have all been junk yard finds or pulled of my own trucks, i havent found anyone that sells new clamps like these but ive never spent to much time looking for them either i hope you find a place to buy them __________________ Trial and Error, its expensive but its a mistake i most likely wont make again 1971 chevy k10 custom deluxe http://67-72chevytrucks.com/vboard/s...d.php?t=341257 1968 chevy k/10 fleet http://67-72chevytrucks.com/vboard/s...d.php?t=334731 1948 desoto custom coupe fluid drive(family heirloom)

11-30-2008, 01:05 AM	#8
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: Where can I find these ? Those are just old style hose clamps, but if you need them because you want your truck to look original, I got mine at classic industries. __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

11-30-2008, 03:01 AM	#9
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: Where can I find these ? Summit has the Fittings, I know AutoZone Auto Parts has them too for sure but dont ask them at the counter cause they will tell you they don't carry them and to go to the Junkyard. Or take your sample with you so they can see it.. I know Cuz thats what I was told so . And after haveing orderd from Summit a week later I found them on the shelf The Brand is Spectre I think thats the brand and they are crome Trans-Dapt Performance Products 2271 $8.39 Brand: Trans-Dapt Performance Products Part Number: TRD-2271 Fitting, 90 Degree, 3/8 in. Hose Barb to 3/8 in. Male NPT, Brass, Each Attached Images __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net Last edited by petey-pablo; 11-30-2008 at 03:14 AM. Reason: spelling

11-30-2008, 09:01 PM	#14
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Where can I find these ? The clamps are available from Ricks First generation Camaro in Georgia, Danchuk manufacturing, NPD (national parts depot)and just about any car repop vender. Look for Impala or Camaro/ Chevelle suppliers the tower clamps as they are commonly called can be bought in complete sets for roughly $25, you will still need a couple extra for heater/ac applications. There are also specific clamps for power steering and gas clamps (a side clamp application) which are also available. These places also offer corbin style clamps for the 67/68 crowd if looking for 100 % correct restore. These places (usually car places especially camaro suppliers) have many, many items that are correct for the engine compartment for our trucks. I have researched alot of the engine detail pieces, for both BB and Sb trucks and these places all offer good service and quality parts. Hope this helps and if any questions let me know. Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.