cab supports i need some info please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tim21391 · 12-10-2008, 05:22 PM

ok we just put in new cab corners... and now we are moving onto the cab supports what is the easiest way to do that and how would u tack them up.... next after this is inner rockers.... thanks tim

JimKshortstep4x4 · 12-10-2008, 06:40 PM

I use small self tapping screws to hold parts together before welding. That way adjustments can be made on the fitment of the parts without dealing with weld removal.

Jim

12-10-2008, 05:22 PM	#1
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	cab supports i need some info please ok we just put in new cab corners... and now we are moving onto the cab supports what is the easiest way to do that and how would u tack them up.... next after this is inner rockers.... thanks tim __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

12-10-2008, 06:40 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: cab supports i need some info please I use small self tapping screws to hold parts together before welding. That way adjustments can be made on the fitment of the parts without dealing with weld removal. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.