so you need a nice BBC/400 drivetrain - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 12-10-2008, 07:26 PM

Somebody needs this smoking deal. Very nice 396 and turbo 400 carb to pan to tail housing. All brackets pulleys acc. hedders complete package 2995.00

This combo has very few miles on it. Its in a buddy of mines truck and he's swapping to a more long distance road worthy injected 6 liter and Od.

71swb4x4 · 12-10-2008, 08:01 PM

Are there pictures of the whole truck on the board somewhere?

my67chevytruck · 12-10-2008, 08:05 PM

I believe thats mikes truck! http://67-72chevytrucks.com/vboard/s...180941&page=13

Smoking deal for someone..... Tax time sucks!!! TTT

Jtrux · 12-10-2008, 09:09 PM

Looks like a smoking deal!

djracer · 12-10-2008, 10:02 PM

I agree that this is a smoking deal for someone. I don't know the exact mileage but its minimal. The truck had a new speedo in when it was built so the exact mileage can be verified. I would be scared to guess what he has in all this stuff.

djracer · 12-10-2008, 10:39 PM

This is a 70 model 396
2 Bolt main block
427 Steel crank
New Forged +.0100 Dome Pistons
Semi closed chamber heads with Lunati springs
New Arp head bolts
New Lunati 276/284 advertised duration(cam part no.60204)
New Cloyes double row timing chain and gears
New Melling oil pump
New 7quart oil pan
New Comp roller rockers, studs, guide plates, larger push rods
New water pump
New rpm air gap intake
New Msd hei distributor
New Msd Wires and hold downs
New Holley street avenger 670 carb with elec. choke
New One wire Alt
New Power steering pump
New Billet brackets and pulleys
Custom painted aluminum valve covers
New flex plate
New Gm High torque starter
New Hedman Elite Coated Chevelle hedders
Tci 3500 stall
Low mileage Turbo 400 with new seals and shift kit

STOCKISH · 12-10-2008, 11:24 PM

PM Sent

Lx3 · 12-10-2008, 11:28 PM

Geez,

never fails, if I got a few bucks I end up paying retail, and when

I'm broke I run across deals like this.

How 'bout a trade ? I got a low milege wife and a dog or two

Spray-Bomb · 12-11-2008, 02:12 AM

If only I had a job !!!

I would buy this thing SO fast !!!

65-72 chevytoys · 12-11-2008, 01:01 PM

Same here I lost my job so the blazer has to go, but if I was keeping it and had the money that combo would be going in.

djracer · 12-11-2008, 03:16 PM

Sold It

phipp13 · 12-11-2008, 11:26 PM

that was a smokin deal! beautifull motor and trans!

narleycarley · 12-27-2008, 06:51 AM

crap!!! just saw this post!

big_al_71 · 12-27-2008, 07:34 AM

Knowing how much I spent in my truck doing all the labor my self someone just got a HELL of a deal....Congrats to the buyer....

12-10-2008, 07:26 PM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	so you need a nice BBC/400 drivetrain Somebody needs this smoking deal. Very nice 396 and turbo 400 carb to pan to tail housing. All brackets pulleys acc. hedders complete package 2995.00 This combo has very few miles on it. Its in a buddy of mines truck and he's swapping to a more long distance road worthy injected 6 liter and Od. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-10-2008, 08:01 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: so you need a nice BBC/400 drivetrain Are there pictures of the whole truck on the board somewhere? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-10-2008, 08:05 PM	#3
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: so you need a nice BBC/400 drivetrain I believe thats mikes truck! http://67-72chevytrucks.com/vboard/s...180941&page=13 Smoking deal for someone..... Tax time sucks!!! TTT __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 12-10-2008 at 08:12 PM.

12-10-2008, 09:09 PM	#4
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: so you need a nice BBC/400 drivetrain Looks like a smoking deal! __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

12-10-2008, 10:02 PM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: so you need a nice BBC/400 drivetrain I agree that this is a smoking deal for someone. I don't know the exact mileage but its minimal. The truck had a new speedo in when it was built so the exact mileage can be verified. I would be scared to guess what he has in all this stuff. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-10-2008, 10:39 PM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: so you need a nice BBC/400 drivetrain This is a 70 model 396 2 Bolt main block 427 Steel crank New Forged +.0100 Dome Pistons Semi closed chamber heads with Lunati springs New Arp head bolts New Lunati 276/284 advertised duration(cam part no.60204) New Cloyes double row timing chain and gears New Melling oil pump New 7quart oil pan New Comp roller rockers, studs, guide plates, larger push rods New water pump New rpm air gap intake New Msd hei distributor New Msd Wires and hold downs New Holley street avenger 670 carb with elec. choke New One wire Alt New Power steering pump New Billet brackets and pulleys Custom painted aluminum valve covers New flex plate New Gm High torque starter New Hedman Elite Coated Chevelle hedders Tci 3500 stall Low mileage Turbo 400 with new seals and shift kit __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-10-2008, 11:24 PM	#7
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: so you need a nice BBC/400 drivetrain PM Sent __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-10-2008, 11:28 PM	#8
Lx3 Registered User Join Date: Nov 2008 Location: Ponder, Texas Posts: 94	Re: so you need a nice BBC/400 drivetrain Geez, never fails, if I got a few bucks I end up paying retail, and when I'm broke I run across deals like this. How 'bout a trade ? I got a low milege wife and a dog or two Attached Images

12-11-2008, 02:12 AM	#9
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: so you need a nice BBC/400 drivetrain If only I had a job !!! I would buy this thing SO fast !!! __________________ Just not low enough... ----------------------------- Sinister Killer

12-11-2008, 01:01 PM	#10
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: so you need a nice BBC/400 drivetrain Same here I lost my job so the blazer has to go, but if I was keeping it and had the money that combo would be going in. __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

12-11-2008, 03:16 PM	#11
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: so you need a nice BBC/400 drivetrain Sold It __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-11-2008, 11:26 PM	#12
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: so you need a nice BBC/400 drivetrain that was a smokin deal! beautifull motor and trans!

12-27-2008, 06:51 AM	#13
narleycarley Registered User Join Date: Nov 2008 Location: cove, tx Posts: 69	Re: so you need a nice BBC/400 drivetrain crap!!! just saw this post!

12-27-2008, 07:34 AM	#14
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: so you need a nice BBC/400 drivetrain Knowing how much I spent in my truck doing all the labor my self someone just got a HELL of a deal....Congrats to the buyer.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.