The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-27-2003, 02:22 AM   #1
perrosinpata@aol.com
Registered User
 
perrosinpata@aol.com's Avatar
 
Join Date: Jan 2002
Location: Arlington TN
Posts: 327
black smoke black smoke

I am running rich and have a edelb 1405 with an electric choke any suggestions?
perrosinpata@aol.com is offline   Reply With Quote
Old 02-27-2003, 02:39 AM   #2
68 Suburban
Registered User
 
68 Suburban's Avatar
 
Join Date: Oct 2000
Location: From Chicago, Live in Phoenix, AZ
Posts: 6,802
Is your engine basically stock? I had to detune my 1406 carb two steps to get it not to be rich. You can get the kit for about $30. It is real easy to do.

Now I am getting 15+ miles per gallon and pass the emissions with flying colors.

Good luck
68 Suburban is offline   Reply With Quote
Old 02-27-2003, 02:53 AM   #3
perrosinpata@aol.com
Registered User
 
perrosinpata@aol.com's Avatar
 
Join Date: Jan 2002
Location: Arlington TN
Posts: 327
how do you de tune and where can i find the kit
perrosinpata@aol.com is offline   Reply With Quote
Old 02-27-2003, 02:58 AM   #4
68 Suburban
Registered User
 
68 Suburban's Avatar
 
Join Date: Oct 2000
Location: From Chicago, Live in Phoenix, AZ
Posts: 6,802
With your carb you should have gotten a booklet. In that booklet there is a chart that shows you what needles and jets you need to tune you carb.

You can get the kit from either Jegs or Summit.

Edelbrock carbs are real easy to work with. If you need to change the jets, it might take 20 minutes. Needles take less than 5 minutes to change.
68 Suburban is offline   Reply With Quote
Old 02-27-2003, 03:01 AM   #5
68 Suburban
Registered User
 
68 Suburban's Avatar
 
Join Date: Oct 2000
Location: From Chicago, Live in Phoenix, AZ
Posts: 6,802
The chart in the booklet will look like this:

My carb is now tuned at the number "7" spot on the chart. I originally went with the number '12' spot, but it was to lean.

68 Suburban is offline   Reply With Quote
Old 02-27-2003, 03:05 AM   #6
68 Suburban
Registered User
 
68 Suburban's Avatar
 
Join Date: Oct 2000
Location: From Chicago, Live in Phoenix, AZ
Posts: 6,802
Check out this page for the kit you want. I guess the kit you need is $20 more than the one I needed

http://www.jegs.com/cgi-bin/ncommerc...98&prmenbr=361
68 Suburban is offline   Reply With Quote
Old 02-27-2003, 03:18 AM   #7
O'l Buck
Recovering Truck Driver
 
O'l Buck's Avatar
 
Join Date: Mar 2002
Location: Orleans, NE USA
Posts: 1,883
I was hoping we were talking about diesels!!!!!
__________________
67 K-20 350, SM465, Eaton rear, 4.56 no spin option
00 Dodge 2500 4x4, 24V cummins, 5 speed

Chad
South Central Nebraska
O'l Buck is offline   Reply With Quote
Old 02-27-2003, 04:06 AM   #8
O'l Buck
Recovering Truck Driver
 
O'l Buck's Avatar
 
Join Date: Mar 2002
Location: Orleans, NE USA
Posts: 1,883
I'll just put it this way.....any diesel I ever had, automotive or semi truck rolled black smoke like a housefire........Who ever would have dreamed that a screwdriver could create so much torque !!!!!!
__________________
67 K-20 350, SM465, Eaton rear, 4.56 no spin option
00 Dodge 2500 4x4, 24V cummins, 5 speed

Chad
South Central Nebraska
O'l Buck is offline   Reply With Quote
Old 02-27-2003, 09:09 AM   #9
Blazer1970
Registered User
 
Blazer1970's Avatar
 
Join Date: Dec 1999
Location: Old Mission, MI, USA
Posts: 2,507
Is the choke opening?
__________________
Tim
Blazer1970 is offline   Reply With Quote
Old 02-27-2003, 09:16 AM   #10
cableguy0
Senior Member
 
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,948
r u running a pressure regulator.even with a stock pump u need one those edelbrocks dont like more than 5.5 psi and ur stock pump is probably running somewhere between 6 and 9 psi.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.
cableguy0 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:40 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com