power plant question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vasquezmrysvll · 12-21-2008, 10:07 PM

getting ready to install a (i belive) 250/powerglide into my 67 swb? it was in a 4 door 64 impala dont think its origional,its a rebuild. how do tell what cid it is?

LuckyHenriksen · 12-21-2008, 10:11 PM

look up the casting numbers

Tx Firefighter · 12-21-2008, 10:26 PM

The number will be on the passenger side of the block, above the rear side cover, near where the oil pressure sender screws in.

vasquezmrysvll · 12-21-2008, 10:59 PM

thanks guys, is a powerglide the same length as a th350? will i need to move my auto crossmember?

prostreetC-10 · 12-22-2008, 12:02 AM

It seems that they are the same. A glide is shorter but has a longer tailshaft so it's the same length. It also seems that all the 4 speeds (car) are the same length as the autos.

vasquezmrysvll · 12-22-2008, 04:06 PM

anyone got pics of 250 engine mounts? not the towers, but the ones that bolt to the block. are there any special spacers,adapters? thanks

12-21-2008, 10:07 PM	#1
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	power plant question getting ready to install a (i belive) 250/powerglide into my 67 swb? it was in a 4 door 64 impala dont think its origional,its a rebuild. how do tell what cid it is? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

12-21-2008, 10:11 PM	#2
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: power plant question look up the casting numbers __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-21-2008, 10:26 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: power plant question The number will be on the passenger side of the block, above the rear side cover, near where the oil pressure sender screws in. __________________ I'm on the Instagram- @Gearhead_Kevin

12-21-2008, 10:59 PM	#4
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: power plant question thanks guys, is a powerglide the same length as a th350? will i need to move my auto crossmember? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

12-22-2008, 12:02 AM	#5
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: power plant question It seems that they are the same. A glide is shorter but has a longer tailshaft so it's the same length. It also seems that all the 4 speeds (car) are the same length as the autos. __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

12-22-2008, 04:06 PM	#6
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: power plant question anyone got pics of 250 engine mounts? not the towers, but the ones that bolt to the block. are there any special spacers,adapters? thanks __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.