![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Dec 2008
Location: New England
Posts: 661
|
Checking in from New England (67 GMC 4x4 help)
Let it snow, let it snow...LET IT SNOW! (Mods, I put this thread in the welcome area as well). If this is the wrong place to post a thread like this could someone suggest to me where to put it to get the most exposure?
Happy Holidays everyone! Newbie here but not new to the 67-72 era of Chevrolet trucks. I’ve been in love with them since childhood because my dad had a 68 K-10 stepside (with a 69 nose my favorite still today), light blue and white. I had the opportunity to restore a nice truck, but just didn’t have the time and sold that and the C10 fleetside truck I had (bought the C-10 for the cab mostly). I was only 18 or so. I’ve regretted it for years. So here’s why I’m here… I purchased a 67 GMC complete chassis 4x4 with a straight 6. It’s definitely the shortwheel base ½ ton. I live in New England and this chassis is in good shape. Frame has surface rust but has NO rot anywhere. It can easily be sandblasted and look new. The full powertrain is still intact including engine, tranny, transfer case, and front and rear end. Breaklines, brakes and front hubs all seem to be in decent shape. There is no linkage for either the tranny or transfer case. I haven’t had a chance to research this specific truck (67 GMC 4x4) because I can’t find much info on them. I will check to see if the frame has a plate on the front frame to specify exactly what the truck is, but if it doesn’t how can I find out the following: Were all 67 GMC 4x4s a 4 speed on the floor? Would the 4x4s come standard with the 4.8L 292 engine? Does it have high and lo? How would I find out what gears were standard in this truck? Any suggestions for a good shop/repair manual? Sorry for such a long post but I’m really excited about this project and I really want to know everything about this truck before I begin the restore! Thanks |
![]() |
![]() |
![]() |
#2 | |
Resident Curmudgeon
![]() Join Date: Dec 1999
Location: NH
Posts: 6,664
|
Re: Checking in from New England (67 GMC 4x4 help)
Quote:
To address your questions: 1. No 4x4 autos were produced prior to 1970, I believe the standard tranny would have been a 3 speed on the column, with the 4 speed granny low an option 2. GMC's had I6's, V6's and V8's whereas Chevys did not have the V6 options. A 292 would have been an optional I6, the 250 the standard one. What does your VIN start with? KS = I6, KM = V6, KE = V8, though GMC VINS are weird so yours may not start with any of these letters. 3. If original, Should be a Rockwell Xfer case with Hi and low range. It sould also have close knuckle front end drums. 4. I'm guessing on a SWB 1/2 ton, 3:73 would be standard, 4:10 optional. I'm a Pats fan too, but this weekend I'm a Jets fan. ![]()
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter ![]() Maybe I need to sell some of this crap ![]() Yet another Bozo with a sawz-all |
|
![]() |
![]() |
![]() |
#3 |
Roadtrip!
![]() Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,737
|
Re: Checking in from New England (67 GMC 4x4 help)
I will make a few guesses for you here. First, i would say you could get different trans combos.
Second, i am pretty sure the 292 was not the standard engine. I am not sure if the 250 or V-6 may have been. Third, should have hi and lo. Fourth, i "think" standard gears would be around 3:54 Shop repair manual i would try to find an original. Most of this is just opinion. The early 4x4s did some different things and then a gmc to boot makes it tougher. Welcome to the board, i am sure someone will know more about this. Eric
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Dec 2008
Location: New England
Posts: 661
|
Re: Checking in from New England (67 GMC 4x4 help)
|
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Dec 2008
Location: New England
Posts: 661
|
Re: Checking in from New England (67 GMC 4x4 help)
Thanks for the welcome Eric. From what I understand the previous owner told me this was a 4 speed on the floor with the granny gear, I was just curious if this was standard equipment back then. Once I look at the engine again I'll know exactly what it is. The engine mount for the 292 would be on the passenger side(at least this is what my research on the internet told me).
|
![]() |
![]() |
![]() |
#6 | |
Resident Curmudgeon
![]() Join Date: Dec 1999
Location: NH
Posts: 6,664
|
Re: Checking in from New England (67 GMC 4x4 help)
Quote:
Back on topic, here are our twin GMC's. Now you need to post some pics.
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter ![]() Maybe I need to sell some of this crap ![]() Yet another Bozo with a sawz-all |
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Dec 2008
Location: New England
Posts: 661
|
Re: Checking in from New England (67 GMC 4x4 help)
Well, of course I'm routing for the Jets to win! Dude, nice trucks. I probably won't have hands on this chassis until after new years. I will definintely take pics once it's delivered.
Being in NH I would think those trucks would be rot boxes. Glad to see you take care of your toys! |
![]() |
![]() |
![]() |
#8 |
Roadtrip!
![]() Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,737
|
Re: Checking in from New England (67 GMC 4x4 help)
There is a quick visual to tell the 250 from the 292. Something to do with the fuel pump, but i can't remember what it is. If you go on e-bay, i see a few 67 gmc manuals pretty reasonable from time to time. I picked up a nice one for my collection for less than $15 shipped.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
![]() |
![]() |
![]() |
#9 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Checking in from New England (67 GMC 4x4 help)
The 250 engine mounts will be straight across from each other.The 292 are offset.The side covers for the lifters are 250=4 in
292=6in. GMC's are harder to decifer because according to legend the records were lost in a fire.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Dec 2008
Location: New England
Posts: 661
|
Re: Checking in from New England (67 GMC 4x4 help)
Thanks everyone!
|
![]() |
![]() |
![]() |
#11 |
Registered User
![]() Join Date: Apr 2007
Location: Foster Rhode Island
Posts: 1,176
|
Re: Checking in from New England (67 GMC 4x4 help)
New England is a big place,well sort of,where in new england are you from?I dont see to many members from this neck of the woods.Oh and welcome to the sight!
|
![]() |
![]() |
![]() |
#12 |
Account Suspended
Join Date: Sep 2008
Location: Alva Florida
Posts: 668
|
Re: Checking in from New England (67 GMC 4x4 help)
chevy had inline six engines gmc had v6 engines the chevy 292 engines and engine parts are hard too find look at the side covers on the side of the engine also the 292 is taller than the 250,230,194 engines i am from CONN
|
![]() |
![]() |
![]() |
#13 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
|
Re: Checking in from New England (67 GMC 4x4 help)
GMCs had both V6 and I6.No V8 till a few late`67s.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Aug 2004
Location: Lake Geneva, WI 53147
Posts: 970
|
Re: Checking in from New England (67 GMC 4x4 help)
Here is my 67 GMC SWB 4x4 when I first hauled it home. It is currently under a frame up rebuild. This GMC had the v-6 and 4-speed on the floor. Axle gear ratio is 354. I swapped out the v-6 engine crossmember for a v-8 one installed a small block 400 and changed the trans to a turbo 400-205 transfer case set up. Really no big deal at all for the swap, just bolts right in. It will be another season or two before the resto is done. Good luck with yours. JOHN
|
![]() |
![]() |
![]() |
#15 |
Keepin it runnin!
Join Date: Oct 2007
Location: Deep River, CT
Posts: 1,036
|
Re: Checking in from New England (67 GMC 4x4 help)
Welcome from CT!
Frank
__________________
1970 K-5 4X4 Blazer ![]() 1970 K-20 4X4 Long Bed ![]() "Liberty Means Responsibility, that is why most men dread it" |
![]() |
![]() |
![]() |
#16 |
big guy
![]() Join Date: Jun 2008
Location: mass
Posts: 820
|
Re: Checking in from New England (67 GMC 4x4 help)
Hey Patsfan34 welcome to the board! I am also from new england. good luck with your new toy... let me know if you need any help, i am great at getting the beer.
go pats Ray |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Mar 2005
Location: Fairfield Maine
Posts: 1,759
|
Re: Checking in from New England (67 GMC 4x4 help)
Welcome from Maine!
![]() |
![]() |
![]() |
![]() |
#18 |
Account Suspended
Join Date: Sep 2008
Location: Alva Florida
Posts: 668
|
Re: Checking in from New England (67 GMC 4x4 help)
oh welcome from FL
|
![]() |
![]() |
![]() |
#19 |
Rolled on Paint Club
![]() Join Date: Jan 2006
Location: Windham, CT.
Posts: 232
|
Re: Checking in from New England (67 GMC 4x4 help)
Welcome to the board from another NewEnglander! ( Well..... actually a transplant from Texas)
Bob
__________________
1970 GMC 1500 swb fleetside SB 355ci. Smog heads Summit 1102 cam Performer intake and carb. Finally in about 1 piece in the yard. |
![]() |
![]() |
![]() |
#20 |
Registered User
![]() Join Date: Dec 2008
Location: New England
Posts: 661
|
Re: Checking in from New England (67 GMC 4x4 help)
Great to see all you New Englanders here! I'm originally from Swansea, MA now reside near Danbury, CT. Looking forward to learning alot and helping where I can!
Let's go Patriots... and Jets(today only) |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: Checking in from New England (67 GMC 4x4 help)
I shouldn't be caught talking to you since im from Indy.... but since the pats aren't a threat this year
![]() My 68 K-10 had 3.73's but as stated, GMC did different stuff. I think that the older 4x4's did all have 4 speeds and no auto's.... welcome and i'm sorry that you were raised a Pats fan... Go colts!
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
![]() |
![]() |
![]() |
#22 |
Active Member
![]() Join Date: Dec 2003
Location: Waterbury, CT
Posts: 591
|
Re: Checking in from New England (67 GMC 4x4 help)
Welcome from Waterbury/Meriden, CT. 72 4x4 swb stepside.
Last edited by 72swbcamo; 12-28-2008 at 01:00 PM. |
![]() |
![]() |
![]() |
#23 |
Registered User
![]() Join Date: Dec 2008
Location: New England
Posts: 661
|
Re: Checking in from New England (67 GMC 4x4 help)
msgross, sorry that the Colts are gonna loose to the Chargers in the first round...you heard it hear first!!! Hey, at least Manning got a superbowl right, now all he can look forward to is the Hall of Fame.
I'm glad you say 4 speeds were common. That's what most people have also stated. I have a pretty good feeling I have a 4 speed and a 292 but I'll be glad to know for sure. See ya man! 72swbcamo, I just drove through your area just a short time ago. Good to meet you! |
![]() |
![]() |
![]() |
#24 |
Resident Curmudgeon
![]() Join Date: Dec 1999
Location: NH
Posts: 6,664
|
Re: Checking in from New England (67 GMC 4x4 help)
GMC's were a different animal, up thru the eartly to mid-60's. They did there own thing. 67 was the first year IIRC that both were made on same assembly lines, but it was not until 69 or 70 that they truely became badge engineered, sharing same components excepit Grilles and badges.
Damn Jets. Oh well 11-5 with your #2 QB isn't bad, Indy went 12-4 on Manning's arm, but probably would have been 4-12 with their backup QB. MGross, guess I'm no longer welcome in your home? ![]() My SB prediction Titans-Giants. Giants 34 Titans 17. Eli gets MVP #2, Peyton pouts. ![]()
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter ![]() Maybe I need to sell some of this crap ![]() Yet another Bozo with a sawz-all |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: Checking in from New England (67 GMC 4x4 help)
It will also have a rockwell transfer case which works but is stated to be noisy and difficult to find parts for. NP205 is a popular swap for guys...
I know where there is a 292-4speed-NP205 combo in the junkyard but it wouldn't be easy to get out and something might be broken in it... Hopefully Brady isn't using his downtime to impregnate any more ladies... ![]()
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
![]() |
![]() |
![]() |
Bookmarks |
|
|