BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 12-10-2008, 11:58 PM

A Brand new Distributor, Acccel brand HEi , all new high performance Dizzy comes with New brass contact cap and adjustable vacuum advance . sell on ebay for $123 & $115, but I want my ONE gone. $90 and I can have it you by Christmas. THEY don't tell you this, but Iwill. You must re-use your old coil or buy an aftermarket Hi-perf unit. OH YEAH, they are also NOT billet like the one guy is saying they are cast material like the originals. Just think, they sell parts for living too! Regardless, these are a bargain. Fits all Small and big block chevy (not tall blocks) from 1955 thru the 80's. These make a huge difference to replace the junk ESC distributors that GM put in the trucks & cars in the late 70's into the mid 80's.
shipping price depends on zip code. thanx, crossy

**jaros44sr** · 12-11-2008, 06:58 AM

Interested, could I get a part number so I can check it out before I buy?

**crossy** · 12-11-2008, 06:30 PM

P/N= 59107

http://www.jegs.com/i/Accel/110/59107/10002/-1

**jaros44sr** · 12-11-2008, 09:14 PM

I'm concerned that the cap will hit the firewall on a Jimmy, could you give me a demension on the cap. I have about 1" to spare. Hope it fits as I really want it. Do I have to install the drive gear?

**crossy** · 12-11-2008, 10:41 PM

drive gear is on it. same cap dimension as all HEI's appx. 5-1/2". these have what appears to be a unique feature in that you can turn the cap every 90 degrees to accomodate SOME clearance issues with that wire connection which sticks out further.

70rs/ss · 12-12-2008, 01:09 AM

I am interested in one.

**jaros44sr** · 12-12-2008, 04:43 AM

Quote:

Originally Posted by crossy

drive gear is on it. same cap dimension as all HEI's appx. 5-1/2". these have what appears to be a unique feature in that you can turn the cap every 90 degrees to accomodate SOME clearance issues with that wire connection which sticks out further.

OK, I'll take it. Would you do 95 shipped?

**crossy** · 12-12-2008, 06:45 AM

I don't know where you are in Philly, but i am only 20 minutes from the Commodore Barry Bridge and easy to find in South Jersey.
you didn't give a zip code, but using my old Pottstown zip it says Priority mail with delivery confirmation(no signing) is $8. parcel is only .50 cheaper in this case.

70rs/ss sorry, but i only have the one accel.
I do have several complete, coil & all, factory , tested good. HEI's for like $25.

I have paypal, but I'm losing enough on this as is so if you paypal me i want the 3% added.
I take postal money orders also.
thanx , crossy

**jaros44sr** · 12-12-2008, 07:02 AM

OK, my zip is 19454...LMK and I'll get a PMO out to you. PM me your home addy please

**crossy** · 12-12-2008, 09:08 PM

Got it.

**jaros44sr** · 12-23-2008, 10:38 AM

Thanks Crossy, got the dist. yesterday, parts were as stated and recieved in new condition. Gotta love that you can trust a fellow board member to deal with honestly and fairly

Happy Holidays to you and your Family

12-10-2008, 11:58 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI A Brand new Distributor, Acccel brand HEi , all new high performance Dizzy comes with New brass contact cap and adjustable vacuum advance . sell on ebay for $123 & $115, but I want my ONE gone. $90 and I can have it you by Christmas. THEY don't tell you this, but Iwill. You must re-use your old coil or buy an aftermarket Hi-perf unit. OH YEAH, they are also NOT billet like the one guy is saying they are cast material like the originals. Just think, they sell parts for living too! Regardless, these are a bargain. Fits all Small and big block chevy (not tall blocks) from 1955 thru the 80's. These make a huge difference to replace the junk ESC distributors that GM put in the trucks & cars in the late 70's into the mid 80's. shipping price depends on zip code. thanx, crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 12-10-2008 at 11:59 PM.

12-11-2008, 06:58 AM	#2
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,515	Re: BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI Interested, could I get a part number so I can check it out before I buy? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-11-2008, 06:30 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI P/N= 59107 http://www.jegs.com/i/Accel/110/59107/10002/-1 Attached Images __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 12-11-2008 at 06:42 PM.

12-11-2008, 09:14 PM	#4
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,515	Re: BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI I'm concerned that the cap will hit the firewall on a Jimmy, could you give me a demension on the cap. I have about 1" to spare. Hope it fits as I really want it. Do I have to install the drive gear? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 12-11-2008 at 09:18 PM.

12-11-2008, 10:41 PM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI drive gear is on it. same cap dimension as all HEI's appx. 5-1/2". these have what appears to be a unique feature in that you can turn the cap every 90 degrees to accomodate SOME clearance issues with that wire connection which sticks out further. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-12-2008, 01:09 AM	#6
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI I am interested in one.

12-12-2008, 06:45 AM	#8
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI I don't know where you are in Philly, but i am only 20 minutes from the Commodore Barry Bridge and easy to find in South Jersey. you didn't give a zip code, but using my old Pottstown zip it says Priority mail with delivery confirmation(no signing) is $8. parcel is only .50 cheaper in this case. 70rs/ss sorry, but i only have the one accel. I do have several complete, coil & all, factory , tested good. HEI's for like $25. I have paypal, but I'm losing enough on this as is so if you paypal me i want the 3% added. I take postal money orders also. thanx , crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-12-2008, 07:02 AM	#9
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,515	Re: BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI OK, my zip is 19454...LMK and I'll get a PMO out to you. PM me your home addy please __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-12-2008, 09:08 PM	#10
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI Got it. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-23-2008, 10:38 AM	#11
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,515	Re: BBC SBC Chevy 350 383 400 454 NEW Accel DISTRIBUTOR HEI Thanks Crossy, got the dist. yesterday, parts were as stated and recieved in new condition. Gotta love that you can trust a fellow board member to deal with honestly and fairly Happy Holidays to you and your Family __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.