My Latest 1/24, and 1/25 Diecast - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 03-02-2003, 12:28 AM

I just finished these up tonight. I had to take a couple of pictures just to show them. I plan on taking better pictures tomorrow in the daylight, with sunshine I hope.
The first one is the POST OFFICE PANEL I bought and started modifying. I know it's not the prettiest flames but they were my first ones I have done. I free handed it all, so that say's enough...RIGHT.

The second one is a JADA 72 truck that I bought a model truck kit and used the bed off of to make a stepside, just to see if I could. I spent 2 and half months on the panel and 2 day's on the 72 step.

Here are the pics.

Andy4639 · 03-02-2003, 12:32 AM

Single of 72 stepside.

Andy4639 · 03-02-2003, 12:35 AM

More Pictures

Andy4639 · 03-02-2003, 12:39 AM

I know ...I know ... I know

Andy4639 · 03-02-2003, 12:43 AM

Another shot of the Panel.

**FRENCHBLUE72** · 03-02-2003, 04:23 AM

Those flames look killer.....You must have a fleet of those trucks now???

Andy4639 · 03-02-2003, 12:17 PM

I don't know how many a fleet has to be, but I do have quite a few of them. I'm still working on them. Since I took the fleet bed off the yellow truck I decided to build a trailer out of it. When I get it done I will post some more pictures of it and all the rest of them together.
Thanks on the flames, it was my first attemp at them. If I ever do another one I think it will turn out even better I hope. THANKS again. ANDY

pissonNOS · 03-02-2003, 02:18 PM

is CHEVROLET spelled wrong on the burb?
CHEVORLET?

Andy4639 · 03-02-2003, 03:27 PM

Yes, and I have already fixed it. Should have done a spell check before printing them. Thanks for the tip. I have time today I'm going to post new pics.

imaindianoutlaw · 03-02-2003, 03:31 PM

lol! Great!

pissonNOS · 03-02-2003, 04:28 PM

im sure your flames will get better with time tooneed to be more wavier than straight

Andy4639 · 03-02-2003, 07:28 PM

Take a look at this little trailer I made for the 72 stepside. I couldn't stand it I didn't want it just setting in a box somewhere all by itself. Got a slide in hitch also.

Andy4639 · 03-02-2003, 07:35 PM

The panel with CHEVROLET spelled right this time I hope.

Andy4639 · 03-02-2003, 07:40 PM

Are you sick of these yet. Here are the rest of my collection.

chevy2racr · 03-02-2003, 11:48 PM

I'm sure there is a 67-72 GMC stepside model availaboe somewhere

03-02-2003, 12:28 AM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	My Latest 1/24, and 1/25 Diecast I just finished these up tonight. I had to take a couple of pictures just to show them. I plan on taking better pictures tomorrow in the daylight, with sunshine I hope. The first one is the POST OFFICE PANEL I bought and started modifying. I know it's not the prettiest flames but they were my first ones I have done. I free handed it all, so that say's enough...RIGHT. The second one is a JADA 72 truck that I bought a model truck kit and used the bed off of to make a stepside, just to see if I could. I spent 2 and half months on the panel and 2 day's on the 72 step. Here are the pics. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 12:32 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	More to follow Single of 72 stepside. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 12:35 AM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Even More More Pictures Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 12:39 AM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	How about some more! I know ...I know ... I know Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 12:43 AM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Last one... I mean it. Another shot of the Panel. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 04:23 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Those flames look killer.....You must have a fleet of those trucks now??? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-02-2003, 12:17 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Almost I don't know how many a fleet has to be, but I do have quite a few of them. I'm still working on them. Since I took the fleet bed off the yellow truck I decided to build a trailer out of it. When I get it done I will post some more pictures of it and all the rest of them together. Thanks on the flames, it was my first attemp at them. If I ever do another one I think it will turn out even better I hope. THANKS again. ANDY __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 02:18 PM	#8
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	is CHEVROLET spelled wrong on the burb? CHEVORLET? __________________ 69 GMC bagged

03-02-2003, 03:27 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Spell Check!!!! Yes, and I have already fixed it. Should have done a spell check before printing them. Thanks for the tip. I have time today I'm going to post new pics. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 03:31 PM	#10
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	lol! Great! __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

03-02-2003, 04:28 PM	#11
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	im sure your flames will get better with time tooneed to be more wavier than straight __________________ 69 GMC bagged

03-02-2003, 07:28 PM	#12
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Here are the new pictures... Take a look at this little trailer I made for the 72 stepside. I couldn't stand it I didn't want it just setting in a box somewhere all by itself. Got a slide in hitch also. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 07:35 PM	#13
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Here's some more The panel with CHEVROLET spelled right this time I hope. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 07:40 PM	#14
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	And another... Are you sick of these yet. Here are the rest of my collection. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-02-2003, 11:48 PM	#15
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	I'm sure there is a 67-72 GMC stepside model availaboe somewhere __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.