Feeler: CenterlineBillet Wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevychase · 01-03-2009, 07:49 PM

One of my customers is offering me these rims as partial payment. I'm testing the waters to see if I should grab them to sell or just keep waiting for the cash.

Centerline Scorpion Billet Series Polished Wheels 17" x 9.5" | 4.5" BS
CNC-machined 2-piece, rotary-forged design

Could use a polish to get to a mirror shine. Rims look clean, no major blemishes I could see. Multilug Pattern 5x5 & 5x5 1/2". Back Spacing looks like 4.5". 1 tire looks decent, other OK but little uneven wear and other 2 are rollers or discards. All center caps and cap hardware included. $550 sound fair? Summit has for $350 each LINK

c10crazy · 01-04-2009, 09:51 AM

The link you posted is a different rim that actually looks a tad better than your customers. Since you are thinking to resell them, I would walk away. In all honesty, those are not popular rims and you will not get more than $300 for them if you are lucky. Please don't take offense but his rims are butt ugly and early 90's looking. That's my honest opinion. Good luck on your decision.

big_al_71 · 01-04-2009, 10:07 AM

Joe, those wheels are not good looking wheels at all. If I was you I would pass.

kursed · 01-04-2009, 10:22 AM

$200 for the set sounds fair, you don't NEED them, and they would only look good on a lawnmower, but they'd probably fetch $200 on eGay or the local trader paper.

chevychase · 01-04-2009, 12:50 PM

Thanks guys, I'm going to pass on them.

01-03-2009, 07:49 PM	#1
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Feeler: Centerline Billet Wheels One of my customers is offering me these rims as partial payment. I'm testing the waters to see if I should grab them to sell or just keep waiting for the cash. Centerline Scorpion Billet Series Polished Wheels 17" x 9.5" \| 4.5" BS CNC-machined 2-piece, rotary-forged design Could use a polish to get to a mirror shine. Rims look clean, no major blemishes I could see. Multilug Pattern 5x5 & 5x5 1/2". Back Spacing looks like 4.5". 1 tire looks decent, other OK but little uneven wear and other 2 are rollers or discards. All center caps and cap hardware included. $550 sound fair? Summit has for $350 each LINK Last edited by chevychase; 01-03-2009 at 09:41 PM.

01-04-2009, 09:51 AM	#2
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	Re: Feeler: CenterlineBillet Wheels The link you posted is a different rim that actually looks a tad better than your customers. Since you are thinking to resell them, I would walk away. In all honesty, those are not popular rims and you will not get more than $300 for them if you are lucky. Please don't take offense but his rims are butt ugly and early 90's looking. That's my honest opinion. Good luck on your decision. __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

01-04-2009, 10:07 AM	#3
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Feeler: CenterlineBillet Wheels Joe, those wheels are not good looking wheels at all. If I was you I would pass. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

01-04-2009, 10:22 AM	#4
kursed Registered User Join Date: Jul 2006 Location: Augusta County, VA Posts: 146	Re: Feeler: CenterlineBillet Wheels $200 for the set sounds fair, you don't NEED them, and they would only look good on a lawnmower, but they'd probably fetch $200 on eGay or the local trader paper.

01-04-2009, 12:50 PM	#5
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: Feeler: CenterlineBillet Wheels Thanks guys, I'm going to pass on them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.