parting 67 chevy 1/2 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shaneschevys · 01-08-2009, 03:21 PM

Parting 67 long step side. Bed, cab, inner fenders, & core support are all shot. Right fender has some rust on the under side but nothing on the out side. Left fender has a little rust in front of the rocker but is other wise nice. Grill is in great shape. it has the painted trim rings & head lite bezels. Hood is nice has had some work done on the front edge it doesnt appear to be anything major.
75.00 each for the fenders SOLD
150.00 for the grill with the trim rings
125.00 for the hood SOLD
5.00 for the cowl panel
250.00 for running 250. carb not included SOLD
75.00 for the 3 speed trans
25.00 each for the doors. Both have rust along the bottom inside. No speaker holes. SOLD
All parts are local pickup only.
Please respond to thread only.

shaneschevys · 01-08-2009, 03:22 PM

The 250 6 cyl

**nightmare** · 01-08-2009, 04:15 PM

Shane, how much for the windshield wiper arms?

vasquezmrysvll · 01-08-2009, 04:54 PM

how much for the engine compartment wiring. from the firewall foward?

Redden05 · 01-08-2009, 06:41 PM

How much for the Headlight Bezels?

Mister laugh · 01-08-2009, 07:24 PM

If you don't sell the exhaust manifold with the motor how much for it shipped to Edmonton, Ab?

Tx Firefighter · 01-08-2009, 09:39 PM

Shane, I need a left side stepside fender to narrow and make a dually fender flare Like the truck below. I need the outer few inches of good metal. Is the fender fit for that ?

Primered_69 · 01-08-2009, 11:28 PM

pm sent

shaneschevys · 01-09-2009, 02:12 AM

nightmare how about 10.00 for the wiper arms.

vasquezmrysvlle let me check out the wireing in the morning & I will get back with you.

redden 05 I am wanting to sell them with the grill

mister laugh I would rather sell the engine complete

Kevin there should be enough good metal for what you need. How about a case of silver bullets for the fenders.

BruceR · 01-09-2009, 06:29 AM

How shot is the bed ?

**nightmare** · 01-09-2009, 09:06 AM

Quote:

Originally Posted by shaneschevys

nightmare how about 10.00 for the wiper arms.

Sure. I'll pm you for directions.

Elephanthead · 01-09-2009, 09:29 AM

I would like the rear view mirror if the mirror part is still intact. How much shipped to 46033? I need the whole thing whatever you can unattach including the arm coming down. My C30 came without one and I would like one, yet it came with a window, go figure. Sorry, I can't do local pickup, I should read instead of looking at pictures.

Tx Firefighter · 01-09-2009, 01:26 PM

I can do the swap with you Shane. One case of Coors light sounds like a deal.

Redden05 · 01-09-2009, 08:09 PM

Well if you decided to sell the bezels separate, let me know. Thanks. David.

shaneschevys · 01-10-2009, 01:53 PM

Quote:

Originally Posted by Elephanthead

I would like the rear view mirror if the mirror part is still intact. How much shipped to 46033? I need the whole thing whatever you can unattach including the arm coming down. My C30 came without one and I would like one, yet it came with a window, go figure. Sorry, I can't do local pickup, I should read instead of looking at pictures.

$25 shipped mirror has some kind of light in it

shaneschevys · 01-10-2009, 01:54 PM

Quote:

Originally Posted by vasquezmrysvll

how much for the engine compartment wiring. from the firewall foward?

Wiring is in good shape $50 shipped

zac redding · 01-10-2009, 04:34 PM

do u have the rear axle with the coils, front suspension, and driveshaft? is it a coil spring rear end?

shaneschevys · 01-10-2009, 05:37 PM

Quote:

Originally Posted by zac redding

do u have the rear axle with the coils, front suspension, and driveshaft? is it a coil spring rear end?

I still have the entire rolling chassis & drive shaft. It is a coil spring rear. I would take 150.00 for the rolling chassis & drive shaft.

shaneschevys · 01-11-2009, 11:05 AM

ttt

Tx Firefighter · 01-11-2009, 11:33 AM

Shane, if you will pull those fenders off when you get a chance and let me know, I will get over there with those silver bullets we talked about.

shaneschevys · 01-11-2009, 12:14 PM

Quote:

Originally Posted by Tx Firefighter

Shane, if you will pull those fenders off when you get a chance and let me know, I will get over there with those silver bullets we talked about.

Will do

mrdurden · 01-11-2009, 09:18 PM

If zac doesn't want the drive shaft, I think I'll take it. As long as its the two piece setup, how much shipped to 87124?

lilred67 · 01-11-2009, 10:22 PM

i'll give you 12 silver bullets for the front bumper!!!!!!!let me know....... rusty

shaneschevys · 01-12-2009, 02:06 AM

More silver bullets

the wife sold it today off of the CL posting.

**Gary 70 Jimmy** · 01-12-2009, 10:15 AM

Does it have the clear plastic horn button

01-08-2009, 03:21 PM	#1
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	parting 67 chevy 1/2 ton Parting 67 long step side. Bed, cab, inner fenders, & core support are all shot. Right fender has some rust on the under side but nothing on the out side. Left fender has a little rust in front of the rocker but is other wise nice. Grill is in great shape. it has the painted trim rings & head lite bezels. Hood is nice has had some work done on the front edge it doesnt appear to be anything major. 75.00 each for the fenders SOLD 150.00 for the grill with the trim rings 125.00 for the hood SOLD 5.00 for the cowl panel 250.00 for running 250. carb not included SOLD 75.00 for the 3 speed trans 25.00 each for the doors. Both have rust along the bottom inside. No speaker holes. SOLD All parts are local pickup only. Please respond to thread only. Attached Images __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club** Last edited by shaneschevys; 02-04-2009 at 11:08 AM.

01-08-2009, 03:22 PM	#2
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: parting 67 chevy 1/2 ton The 250 6 cyl Attached Images __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-08-2009, 04:54 PM	#4
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: parting 67 chevy 1/2 ton how much for the engine compartment wiring. from the firewall foward? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

01-08-2009, 06:41 PM	#5
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: parting 67 chevy 1/2 ton How much for the Headlight Bezels?

01-08-2009, 07:24 PM	#6
Mister laugh Registered User Join Date: Jun 2007 Location: Edmonton, Alberta Posts: 423	Re: parting 67 chevy 1/2 ton If you don't sell the exhaust manifold with the motor how much for it shipped to Edmonton, Ab?

01-08-2009, 09:39 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: parting 67 chevy 1/2 ton Shane, I need a left side stepside fender to narrow and make a dually fender flare Like the truck below. I need the outer few inches of good metal. Is the fender fit for that ? __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 01-08-2009 at 09:44 PM.

01-08-2009, 11:28 PM	#8
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	Re: parting 67 chevy 1/2 ton pm sent __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

01-09-2009, 02:12 AM	#9
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: parting 67 chevy 1/2 ton nightmare how about 10.00 for the wiper arms. vasquezmrysvlle let me check out the wireing in the morning & I will get back with you. redden 05 I am wanting to sell them with the grill mister laugh I would rather sell the engine complete Kevin there should be enough good metal for what you need. How about a case of silver bullets for the fenders. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-09-2009, 06:29 AM	#10
BruceR Registered User Join Date: Sep 2008 Location: Lindale, TX- Shallow end of the gene pool Posts: 28	Re: parting 67 chevy 1/2 ton How shot is the bed ?

01-09-2009, 09:29 AM	#12
Elephanthead Registered User Join Date: Nov 2008 Location: Carmel, IN Posts: 187	Re: parting 67 chevy 1/2 ton I would like the rear view mirror if the mirror part is still intact. How much shipped to 46033? I need the whole thing whatever you can unattach including the arm coming down. My C30 came without one and I would like one, yet it came with a window, go figure. Sorry, I can't do local pickup, I should read instead of looking at pictures. Last edited by Elephanthead; 01-09-2009 at 09:30 AM.

01-09-2009, 01:26 PM	#13
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: parting 67 chevy 1/2 ton I can do the swap with you Shane. One case of Coors light sounds like a deal. __________________ I'm on the Instagram- @Gearhead_Kevin

01-09-2009, 08:09 PM	#14
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: parting 67 chevy 1/2 ton Well if you decided to sell the bezels separate, let me know. Thanks. David.

01-10-2009, 04:34 PM	#17
zac redding Registered User Join Date: Jan 2009 Location: midwest city oklahoma Posts: 39	Re: parting 67 chevy 1/2 ton do u have the rear axle with the coils, front suspension, and driveshaft? is it a coil spring rear end?

01-11-2009, 11:05 AM	#19
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: parting 67 chevy 1/2 ton ttt __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-11-2009, 11:33 AM	#20
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: parting 67 chevy 1/2 ton Shane, if you will pull those fenders off when you get a chance and let me know, I will get over there with those silver bullets we talked about. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

01-11-2009, 09:18 PM	#22
mrdurden Registered User Join Date: Sep 2004 Location: Rio Rancho, NM Posts: 92	Re: parting 67 chevy 1/2 ton If zac doesn't want the drive shaft, I think I'll take it. As long as its the two piece setup, how much shipped to 87124? __________________ '67 2wd LWB Fleetside '71 4wd LWB Fleetside

01-11-2009, 10:22 PM	#23
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: parting 67 chevy 1/2 ton i'll give you 12 silver bullets for the front bumper!!!!!!!let me know....... rusty

01-12-2009, 02:06 AM	#24
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: parting 67 chevy 1/2 ton More silver bullets the wife sold it today off of the CL posting. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-12-2009, 10:15 AM	#25
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: parting 67 chevy 1/2 ton Does it have the clear plastic horn button __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

Register or Log In To remove these advertisements.