McGaugheys Spindles and Brake booster setup new in box - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 01-11-2009, 01:07 AM

Dropped both prices an additional $25. Now about $75 less than retail for new parts in the box

63173 2 1/2" drop spindles $225.00 Fits 67-70 Trucks ball joints/tie rods only and disc brakes only

63179 7" Brake booster w/ master cylinder $200.00 Comes with brackets and attachment to work with stock pedal location. Dual diaphram set up for disc brakes. No proportioning valve.

Prices are without shipping. Parts are in 23112 zip. I will split shipping with whoever wants these. Will deliver in states bordering VA and WV for a small fee. Please reply in post. PM's will be used for payment details only. Paypal (w/3% fee) or Money order. Thanks!

http://store.summitracing.com/partde...5&autoview=sku

http://store.summitracing.com/partde...5&autoview=sku

Hard On Parts · 01-11-2009, 11:44 AM

Can you run drums on these spindles? Or do you have to convert drums to discs?

70k52wd · 01-11-2009, 12:30 PM

Quote:

Originally Posted by VA72C10

63173 2 1/2" drop spindles $250.00 Fits 67-70 Trucks ball joints/tie rods only

Bought my truck restored 15+ years ago, never had a reason to work on it until now.(want to drop it more)When I bought truck it already had 5 lug swap...Question...How do I I.D. my parts. I assume they are 71-72 upper/lower arms, spindles, ball joints... Tie rods, unsure of though...Could my stuff be 73-87 stuff...I don't know. Also, apparently 67-70 rear end measurements differ from 71-72, How do I I.D. as well... I would sure like to buy some stuff from you (spindles)...Also have a few NOS parts as well for you, door rubber, wheel wells, and I also have a Jap tailgate in the box. I know you have no interest in tailgate, but I put it out there anyways. Thanks. Ring me sometime.

VA72C10 · 01-11-2009, 02:07 PM

Quote:

Originally Posted by Hard On Parts

Can you run drums on these spindles? Or do you have to convert drums to discs?

None of the aftermarket spindles work with drums. They all only accept discs.

VA72C10 · 01-12-2009, 01:50 PM

ttt

VA72C10 · 01-13-2009, 01:09 AM

ttt

VA72C10 · 01-25-2009, 10:39 PM

Ttt

VA72C10 · 02-12-2009, 02:02 AM

ttt

VA72C10 · 02-14-2009, 01:04 AM

These are $50 less than summit and are still new in the box. I will split shipping with whoever buys these or take $25 off for pickup.

VA72C10 · 02-16-2009, 12:28 PM

TTT dropped the price as low as I will go on these.

es67chevy · 02-16-2009, 01:41 PM

Interested in the booster. Do you know if the booster is single or dual diaphram? Also, does it have a proportioning valve with it?

VA72C10 · 02-16-2009, 02:04 PM

Quote:

Originally Posted by es67chevy

Interested in the booster. Do you know if the booster is single or dual diaphram? Also, does it have a proportioning valve with it?

It is just the booster with master cylinder...no proportioning valve. But it is a dual diaphram made for disc brakes. Verified that by phone today with McGaughey's

*FormerMember* · 02-16-2009, 08:08 PM

TTT for a good deal.

(edit: realized I need 6 lug, which means it's cheaper to buy a complete kit)

es67chevy · 02-19-2009, 03:25 PM

Quote:

Originally Posted by VA72C10

It is just the booster with master cylinder...no proportioning valve. But it is a dual diaphram made for disc brakes. Verified that by phone today with McGaughey's

Yeah, I think we talked to the same guy who didn't understand what we were asking. I think he was referring to the master cylinder being dual port. I did more reasearch and found that it is single diaphragm. I believe it will be too small for my needs as a single diaphragm. But here's another bump for ya. good luck!

tommyd241 · 02-19-2009, 05:12 PM

How much for the drop spindles shipped to 87107?

VA72C10 · 02-19-2009, 11:20 PM

I'll do 250 shipped. Shipping looks to be around 40.

VA72C10 · 02-23-2009, 11:44 PM

ttt

VA72C10 · 03-02-2009, 01:37 PM

ttt

SS68 · 03-03-2009, 11:14 PM

whats the best you can do on the power booster shipped to texas 75080,

MDC · 03-04-2009, 01:16 AM

How about the spindles shipped to Texas also 75067

VA72C10 · 03-04-2009, 01:53 PM

Quote:

Originally Posted by SS68

whats the best you can do on the power booster shipped to texas 75080,

200+20 shipping (40 split) =220 shipped

Quote:

Originally Posted by MDC

How about the spindles shipped to Texas also 75067

225+20 shipping (40 split)= 245 shipped

Thanks for the interest, let me know.

SURREALIST88 · 03-05-2009, 05:08 PM

i have a 68 chevy step side with disc brakes, will the spindles fit? if so

VA72C10 · 03-05-2009, 09:38 PM

You have one in front of you, but if they back out I'll let you know. THe spindles will work as long as the disc brakes are made to fit with factory style spindles which they obviously should be.

VA72C10 · 03-08-2009, 09:58 PM

TTT.....you guys still interested?

VA72C10 · 03-10-2009, 10:38 AM

ttt

01-11-2009, 01:07 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	McGaugheys Spindles and Brake booster setup new in box Dropped both prices an additional $25. Now about $75 less than retail for new parts in the box 63173 2 1/2" drop spindles $225.00 Fits 67-70 Trucks ball joints/tie rods only and disc brakes only 63179 7" Brake booster w/ master cylinder $200.00 Comes with brackets and attachment to work with stock pedal location. Dual diaphram set up for disc brakes. No proportioning valve. Prices are without shipping. Parts are in 23112 zip. I will split shipping with whoever wants these. Will deliver in states bordering VA and WV for a small fee. Please reply in post. PM's will be used for payment details only. Paypal (w/3% fee) or Money order. Thanks! http://store.summitracing.com/partde...5&autoview=sku http://store.summitracing.com/partde...5&autoview=sku __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 02-16-2009 at 08:41 PM.

01-11-2009, 11:44 AM	#2
Hard On Parts Registered User Join Date: Dec 2008 Location: Cedar Vale, KS Posts: 145	Re: McGaugheys Spindles and Brake booster setup new in box Can you run drums on these spindles? Or do you have to convert drums to discs?

01-12-2009, 01:50 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-13-2009, 01:09 AM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-25-2009, 10:39 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box Ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-12-2009, 02:02 AM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-14-2009, 01:04 AM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box These are $50 less than summit and are still new in the box. I will split shipping with whoever buys these or take $25 off for pickup. __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-16-2009, 12:28 PM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box TTT dropped the price as low as I will go on these. __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-16-2009, 01:41 PM	#11
es67chevy Registered User Join Date: Aug 2007 Location: Bella Vista, AR Posts: 1,107	Re: McGaugheys Spindles and Brake booster setup new in box Interested in the booster. Do you know if the booster is single or dual diaphram? Also, does it have a proportioning valve with it? __________________ Eric 1967 C10 SWB 383 Stroker/TH400 Brother's One Piece Power Windows Shaved Doors, Markers, and Bumpers 4/6 Early Classic Drop Rear Fuel Tank (49-52 Chevy Car Tank) Surf Blue Paint Bella Vista, AR (Arkansas for those that get the 'A' states mixed up) My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869

02-16-2009, 08:08 PM	#13
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: McGaugheys Spindles and Brake booster setup new in box TTT for a good deal. (edit: realized I need 6 lug, which means it's cheaper to buy a complete kit) Last edited by FormerMember; 02-16-2009 at 08:09 PM.

02-19-2009, 05:12 PM	#15
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: McGaugheys Spindles and Brake booster setup new in box How much for the drop spindles shipped to 87107?

02-19-2009, 11:20 PM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box I'll do 250 shipped. Shipping looks to be around 40. __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-23-2009, 11:44 PM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-02-2009, 01:37 PM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-03-2009, 11:14 PM	#19
SS68 Registered User Join Date: Apr 2008 Location: Dallas, TX Posts: 126	Re: McGaugheys Spindles and Brake booster setup new in box whats the best you can do on the power booster shipped to texas 75080,



Register or Log In To remove these advertisements.

03-04-2009, 01:16 AM	#20
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: McGaugheys Spindles and Brake booster setup new in box How about the spindles shipped to Texas also 75067 __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

03-05-2009, 05:08 PM	#22
SURREALIST88 Registered User Join Date: Feb 2009 Location: TAMPA, FL Posts: 8	Re: McGaugheys Spindles and Brake booster setup new in box i have a 68 chevy step side with disc brakes, will the spindles fit? if so

03-05-2009, 09:38 PM	#23
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box You have one in front of you, but if they back out I'll let you know. THe spindles will work as long as the disc brakes are made to fit with factory style spindles which they obviously should be. __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-08-2009, 09:58 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box TTT.....you guys still interested? __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-10-2009, 10:38 AM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: McGaugheys Spindles and Brake booster setup new in box ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.