Header Solution - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kcjones · 01-12-2009, 03:07 PM

Quote:

Originally Posted by Jokers69

Still on sale any takers?

I apologize, but so I know: What is the price (exluding shipping, I assume) of the 1 3/4 primary 3" collector, non-stainless coated headers? And what is the price if I have to wait til mid-March to order? And where are they shipped from? Trying to budget...

**special-K** · 01-12-2009, 03:16 PM

Quote:

Originally Posted by Jokers69

They will not work on manual transmisson with factory clutch linkage

Counts me out.All they needed was the left rear tube to come straight down,or better yet,angle ever so slightly forward and they`d fit them all.

Slik69 · 01-12-2009, 04:20 PM

Quote:

Originally Posted by Jokers69

They will not work on manual transmisson with factory clutch linkage

Will they work on a manual that was switched to automatic, but the clutch linkage still in place. I believe I can just remove the linkage, not sure why previous owner left it there.

How much and aren't most headers you guy non stainless. How much for them. I know the price was listed up...

Thanks, these look good. I shy'd away from headers because I didn't want to see them and the pipes (for that matter), from the sides.

Have you guys done any research on flow characteristics/improvements to other products or do you care not too? I ask because I was interested if any tunability is factored into making them. If so, this is a very hot header that can be used for guys more on the high performance side as well.

**Jokers69** · 01-13-2009, 01:27 AM

Quote:

Originally Posted by kcjones

I apologize, but so I know: What is the price (exluding shipping, I assume) of the 1 3/4 primary 3" collector, non-stainless coated headers? And what is the price if I have to wait til mid-March to order? And where are they shipped from? Trying to budget...

The price is $865.00 for them coated. But they are on sale for $75.00 off for a limited time. I don't know at this time for how long. They will be shipping from Kent,Washington. Let me know if you have any other questions.

**Jokers69** · 01-13-2009, 01:39 AM

Quote:

Originally Posted by Slik69

Will they work on a manual that was switched to automatic, but the clutch linkage still in place. I believe I can just remove the linkage, not sure why previous owner left it there.

How much and aren't most headers you guy non stainless. How much for them. I know the price was listed up...

Thanks, these look good. I shy'd away from headers because I didn't want to see them and the pipes (for that matter), from the sides.

Have you guys done any research on flow characteristics/improvements to other products or do you care not too? I ask because I was interested if any tunability is factored into making them. If so, this is a very hot header that can be used for guys more on the high performance side as well.

Yes they will work if you remove the clutch linkage. They are $550.00 bare , $865.00 coated and $975.00 stainless and $75.00 off at for a limited time. These header where designed to not hang below the frame rails with big primaries and long tubes. We have not done any testing as of yet.

**Jokers69** · 01-13-2009, 02:01 AM

Quote:

Originally Posted by special-K

Counts me out.All they needed was the left rear tube to come straight down,or better yet,angle ever so slightly forward and they`d fit them all.

We didn't have access to a manual trans truck when we where building them. I had them custom build for my truck and when they turned out so good I thought I would offer them to the board members with the same setup (or close to the same setup) . It is not the rear tube that is the problem. It's where the #1 tube comes down that will interfere with the clutch linkage.
Keisler Auto sells a Hydraulic clutch setup that will work with our headers. I know that not everyone will want to spend that additional money just to run these headers. But it's just another option.

Spray-Bomb · 01-25-2009, 02:22 AM

Bump for coolness

**Jokers69** · 02-08-2009, 10:53 PM

Bump

TCASON · 02-09-2009, 12:24 PM

I have mine, freaking awesome!
Just waiting to put on the new Edelbrock mani and carb, switch out the tranny for the 700r4, with the new lokar linkage and I'm set.

My truck is going to have a heart attack!

coast2coast · 03-08-2009, 04:09 PM

Jokers69, I don't mean to hijack your thread, but what motor mounts are you running with the cpp stands?

AJs72K5 · 03-08-2009, 06:18 PM

Any word on big block?

**Jokers69** · 03-09-2009, 09:20 PM

The motor mounts are the poly ones cpp sells. Still working on big block ones. We need a truck with a bb in it local so we can get them made. We got acess to a mock up block but would like to have a real motor in a truck.

*FormerMember* · 03-10-2009, 07:47 AM

Are they doing that same 10% off on the stainless ones?

**Jokers69** · 03-11-2009, 12:41 AM

They were all on sale. I will check tomorrow and make sure the sale is still on and for how long.

69trk · 03-12-2009, 06:43 AM

I'm needing some big block headers also. 2"primary and 3.5" collectors.

**Jokers69** · 03-13-2009, 01:20 AM

Yes they are still on sale and will be for one more month.

Dynomutt · 03-15-2009, 02:12 PM

I'm interested in a BB set as well if you can get some made. Auto and A/C in my truck.

kcjones · 03-18-2009, 01:01 PM

I'm so close to buying these, hope the sales continues, if not, what are the chances they'll still be making these 2 months from now? I cannot find anything like these from any normal header company.

**Jokers69** · 03-19-2009, 01:05 AM

Yes they will still be making them in a couple of months. It's just the sale will end the middle of next month.

*FormerMember* · 03-19-2009, 08:43 AM

As soon as I get some extra funds, I am on it.

lindsey · 03-19-2009, 04:41 PM

Looks like a nice product. I will hopefully be ordering a set early next month to get in on the sale. Do these things have any sort of warranty like the Heddman Headers do.

local13hutch · 03-20-2009, 08:16 AM

I asked earlier if these will work on angled plug heads and I just want to make it clear that I am talking about factory 07 5.3 engine... I had a problem once with my 71 lt1 with angled plug world sportsman II heads and the headers I used prior to this on the same truck and block but straight plugs worked fine so I overlooked this problem and the only way I could run them was with a 1/4'' spacer wich I wasnt to happy with so I blew 480$ twice.. and my son got a nice set of headers for free any way sorry for hijackin your thread but I am in if you guys can do it... Thank you ...

**Jokers69** · 03-21-2009, 12:27 AM

Yes, They do come with a warranty I will talk to them a get the details and let you know. They will fit angle plug heads with standard style bolt flanges. As for 07 5.3 I think they run a different flange. I will look into that.

chevysittinsidewayz · 03-21-2009, 12:34 PM

can i get a seat made that is more equal length and the collectors not welded on?

**Jokers69** · 03-23-2009, 09:45 PM

You can get them without the collectors welded on but to get them more equal lenght would be a custom job. Our jig is already made and it would be something you would need to have built for your truck.

01-25-2009, 02:22 AM	#57
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Header Solution Bump for coolness __________________ Just not low enough... ----------------------------- Sinister Killer

02-08-2009, 10:53 PM	#58
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution Bump

02-09-2009, 12:24 PM	#59
TCASON Registered User Join Date: Nov 2008 Location: Auburn, Wa Posts: 46	Re: Header Solution I have mine, freaking awesome! Just waiting to put on the new Edelbrock mani and carb, switch out the tranny for the 700r4, with the new lokar linkage and I'm set. My truck is going to have a heart attack!

03-08-2009, 04:09 PM	#60
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Header Solution Jokers69, I don't mean to hijack your thread, but what motor mounts are you running with the cpp stands? Attached Images

03-08-2009, 06:18 PM	#61
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Header Solution Any word on big block? __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

03-09-2009, 09:20 PM	#62
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution The motor mounts are the poly ones cpp sells. Still working on big block ones. We need a truck with a bb in it local so we can get them made. We got acess to a mock up block but would like to have a real motor in a truck.

03-10-2009, 07:47 AM	#63
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Header Solution Are they doing that same 10% off on the stainless ones?

03-11-2009, 12:41 AM	#64
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution They were all on sale. I will check tomorrow and make sure the sale is still on and for how long.

03-12-2009, 06:43 AM	#65
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: Header Solution I'm needing some big block headers also. 2"primary and 3.5" collectors. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

03-13-2009, 01:20 AM	#66
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution Yes they are still on sale and will be for one more month.

03-15-2009, 02:12 PM	#67
Dynomutt Registered User Join Date: Mar 2009 Location: North Texas Posts: 440	Re: Header Solution I'm interested in a BB set as well if you can get some made. Auto and A/C in my truck. __________________ MARQ Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=446194

03-18-2009, 01:01 PM	#68
kcjones I wish I was a cowboy Join Date: Apr 2008 Location: Rohnert Park, CA Posts: 409	Re: Header Solution I'm so close to buying these, hope the sales continues, if not, what are the chances they'll still be making these 2 months from now? I cannot find anything like these from any normal header company. __________________ -Kris Met list: Cyclone,Wilson,TranzAm,extd56,hotrodhomi,mnky30,Rokcrln,Brad,JerryJones(well, his truck anyway).

03-19-2009, 01:05 AM	#69
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution Yes they will still be making them in a couple of months. It's just the sale will end the middle of next month. Last edited by Jokers69; 03-19-2009 at 01:07 AM. Reason: retarded

03-19-2009, 08:43 AM	#70
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Header Solution As soon as I get some extra funds, I am on it.

03-19-2009, 04:41 PM	#71
lindsey Registered User Join Date: Aug 2007 Location: Tucson, AZ Posts: 30	Re: Header Solution Looks like a nice product. I will hopefully be ordering a set early next month to get in on the sale. Do these things have any sort of warranty like the Heddman Headers do.



Register or Log In To remove these advertisements.

03-20-2009, 08:16 AM	#72
local13hutch MEMBER Join Date: Mar 2006 Location: garden grove, ca Posts: 185	Re: Header Solution I asked earlier if these will work on angled plug heads and I just want to make it clear that I am talking about factory 07 5.3 engine... I had a problem once with my 71 lt1 with angled plug world sportsman II heads and the headers I used prior to this on the same truck and block but straight plugs worked fine so I overlooked this problem and the only way I could run them was with a 1/4'' spacer wich I wasnt to happy with so I blew 480$ twice.. and my son got a nice set of headers for free any way sorry for hijackin your thread but I am in if you guys can do it... Thank you ... __________________ 86 sub 4wd, 1 ton, duallie, big block th475 72 c10 short fleet, pro street 72 K/5 blazer,2x4 almost stock 72 3/4 ton sub 4x4 61 morris minor pickup, chevy 4.3 v6 03 escalade, 24" momo's wifes 96 2wd 2door tahoe 67 2wd suburban 72 4wd k5 99 vortec 14bolt/d60 205/th400- 72 4wd crewcab 1 ton sb cummins allison -2012 2ss camaro black hard top- 8 yamaha quads- 05 4wd one ton duramax dually, family limo.

03-21-2009, 12:27 AM	#73
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution Yes, They do come with a warranty I will talk to them a get the details and let you know. They will fit angle plug heads with standard style bolt flanges. As for 07 5.3 I think they run a different flange. I will look into that.

03-21-2009, 12:34 PM	#74
chevysittinsidewayz Registered User Join Date: May 2008 Location: boise idaho Posts: 20	Re: Header Solution can i get a seat made that is more equal length and the collectors not welded on? __________________ whoever thought of "i live my life a quater mile at a time"-vin diesel needs to be ***** slapped. i would have a pretty short life

03-23-2009, 09:45 PM	#75
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution You can get them without the collectors welded on but to get them more equal lenght would be a custom job. Our jig is already made and it would be something you would need to have built for your truck.

Register or Log In To remove these advertisements.