The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-15-2009, 12:08 PM   #1301
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Quote:
Originally Posted by Blitz View Post
What a thread!! I lost track of how long it took for me to get through this entire thread but...it was well worth it. That is such a nice ride. There are a few trucks in the Tri-five body that turn my head and this is probably #1. Going through the garage I found some truck magazines 11 years old (and older) that I saved all these years. I've been looking at them off and on for the last few days and I would have to say that from what I've paid attention to, your truck has set the standard for my personal tastes and every truck of this bodystyle will be compared to it. I'm HOPING to build a 67/68 someday and just reading your thread has accelerated my knowledge of what it'll take to get to where I want to be. Although you're afraid to scratch it, don't be afraid to ENJOY it. There are a lot of folks that would like to be in your shoes and you seem to be a genuinely kind, humble and friendly person. Keep that up. Yeah, take it to the shows but every now and then take it to the park or just out for a little cruise. You never know who you've inspired to build one. Kids young and old alike will appreciate what that truck means and could mean if they had one of their own. I think that's what makes part of this truck so special to the rest of us. It's been a pleasure reading, watching, learning and laughing along the way of this thread. It was an experience in itself. If you ever get the itch to bring 'er out to GoodGuys Fort Worth (TX), I'll be sure to bring a towel so I don't drool over the paint. I've caught the last two shows since being stationed out here and I have to say...Texas LOVES their trucks!! Haha. Later Cal.
Thanks for the kind words Blitz! I have enjoyed sharing the build with all my friends here just as much as some of you all have enjoyed following this thread. Also, just to let you know, when the sun shining and the weather is nice I take her out a cruise the street, heck that's the fun part!

Dave
CAL 58 GMC is offline   Reply With Quote
Old 01-25-2009, 07:09 PM   #1302
BluTooth
Registered User
 
Join Date: Nov 2008
Location: Madison, AL
Posts: 42
Re: 58 GMC Project

I am a new member and I started reading this thread for some ideas and inspiration. Thud, that was the sound of my jaw hitting the table on the first page. Well 4 hours later and 53 pages later I am inspired and impressed. Of course I had to fend off the wife a couple of times, it was like reading a really good book, I couldn't put it down. Excellent work and great pics. If i ever get out that way I would like to meet up with some of the guys and swap some stories.
BluTooth is offline   Reply With Quote
Old 01-26-2009, 01:35 AM   #1303
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Quote:
Originally Posted by BluTooth View Post
I am a new member and I started reading this thread for some ideas and inspiration. Thud, that was the sound of my jaw hitting the table on the first page. Well 4 hours later and 53 pages later I am inspired and impressed. Of course I had to fend off the wife a couple of times, it was like reading a really good book, I couldn't put it down. Excellent work and great pics. If i ever get out that way I would like to meet up with some of the guys and swap some stories.
Thanks BluTooth!! I'm glade you were able to take the time to read my thread and that it inspired you! The build was alot of work and at time I needed some inspiration. Well here's were I found it. So many cool builds and really good people kept me coming back. So to know this thread still inspires is a rather cool thing!!!

P.S. Wecolme!!!

Last edited by CAL 58 GMC; 01-26-2009 at 01:36 AM.
CAL 58 GMC is offline   Reply With Quote
Old 01-26-2009, 09:35 PM   #1304
entourageguy
Yellow truck club
 
entourageguy's Avatar
 
Join Date: Apr 2006
Location: Barrie Ontario
Posts: 2,080
Re: 58 GMC Project

Yea and we had to put up with it for 2 years
__________________
................................................................

Brian ......

My hub garage address
http://www.hubgarage.com/mygarage/59apache
I gue$$ everything has it'$ price
ALL GONE NOW

59 Chev Apache
PRAISE THE LOWERED
350 700r lokar shifter
power MII front end, shockwaves
tilt, 4 wheel discs
4-link and bags
10 bolt limited
entourageguy is offline   Reply With Quote
Old 01-26-2009, 10:28 PM   #1305
Blitz
Mr. Thread Killer
 
Join Date: Dec 2008
Location: Norcross, GA
Posts: 388
Re: 58 GMC Project

So Cal, what trucks would you say were an inspirtation to YOU? I'd like to know what the cool people call cool.
Blitz is offline   Reply With Quote
Old 01-27-2009, 04:03 AM   #1306
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Quote:
Originally Posted by Blitz View Post
So Cal, what trucks would you say were an inspirtation to YOU? I'd like to know what the cool people call cool.
I know this might sound like a canned answer but almost every truck build on this site is cool to me. What I mean is all of these truck are at different stages into their builds and well building old classic truck is just a cool thing so most all of them still inspire me! So my answer would be, 99.9% are awesome and 0.1% I would have to scratch my head and think to myself, "Man what was this dude thinking" but hay, what I may not like everyone else might.

Last edited by CAL 58 GMC; 01-27-2009 at 04:07 AM.
CAL 58 GMC is offline   Reply With Quote
Old 01-27-2009, 12:22 PM   #1307
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: 58 GMC Project

Quote:
Originally Posted by CAL 58 GMC View Post
I know this might sound like a canned answer but almost every truck build on this site is cool to me. What I mean is all of these truck are at different stages into their builds and well building old classic truck is just a cool thing so most all of them still inspire me! So my answer would be, 99.9% are awesome and 0.1% I would have to scratch my head and think to myself, "Man what was this dude thinking" but hay, what I may not like everyone else might.
Yeah what he said.lol There are some really nice build on this site that's for sure.
Kabwe is offline   Reply With Quote
Old 01-31-2009, 03:49 PM   #1308
57ToyBox
Registered User
 
57ToyBox's Avatar
 
Join Date: Apr 2007
Location: Callander Ont.
Posts: 387
Re: 58 GMC Project

Quote:
Originally Posted by CAL 58 GMC View Post
I spent most of the weekend working on the project. I got the rear end all rebulit with a posi unit and all new seals & bearings. I put new drilled rotors and new calipers on, You can also see in the pics I got the gas tank in now.

Hi Cal
How do you like your rear end after you rebuilt it with the posi Camaro gears.
I got my S10 4X4 Blazer axle, and I was wondering what the manufacturer's name is on your calipers.
I did some online shopping for custom S10 Blazer Axle parts but haven't found anything I liked.
57ToyBox is offline   Reply With Quote
Old 01-31-2009, 09:12 PM   #1309
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Quote:
Originally Posted by Diesel View Post
Hi Cal
How do you like your rear end after you rebuilt it with the posi Camaro gears.
I got my S10 4X4 Blazer axle, and I was wondering what the manufacturer's name is on your calipers.
I did some online shopping for custom S10 Blazer Axle parts but haven't found anything I liked.
It's works fine for what I use the truck for. If I had built the truck for the 1/4 mile then I would have gone with a 9 inch or a custom built Moser. I'm running the stock calipers.

Last edited by CAL 58 GMC; 02-19-2009 at 11:49 AM.
CAL 58 GMC is offline   Reply With Quote
Old 02-18-2009, 10:25 PM   #1310
bensimmons_05
Registered User
 
bensimmons_05's Avatar
 
Join Date: Dec 2007
Location: Jacksonville, AL
Posts: 479
Re: 58 GMC Project

... So What is your next project?? I'd like to see another page 1
__________________
---Ben Jammin's 1955 Chevy/GMC Project ---

---The shop's live video feed--- <<< See what I'm up to!
bensimmons_05 is offline   Reply With Quote
Old 02-19-2009, 11:52 AM   #1311
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Quote:
Originally Posted by bensimmons_05 View Post
... So What is your next project?? I'd like to see another page 1
No plans for me right now. I'm going to be helping out a friend finish up his 55 Bel Air. He's bring over to my house this weekend so that's going to keep me bussy. When his car gets here I'll post a few pics.

Last edited by CAL 58 GMC; 02-19-2009 at 07:53 PM.
CAL 58 GMC is offline   Reply With Quote
Old 02-19-2009, 02:14 PM   #1312
b00sted
Registered User
 
b00sted's Avatar
 
Join Date: May 2008
Location: Midland GA
Posts: 332
Re: 58 GMC Project

What a build and what a truck... just a WOW from me...
__________________
1949 Chevy 408 CID stroker 6.0l with a few add ons, 4l80E, 4 Wheel Disk Brakes and a set of GT35 going on soon.
b00sted is offline   Reply With Quote
Old 02-19-2009, 07:09 PM   #1313
Blitz
Mr. Thread Killer
 
Join Date: Dec 2008
Location: Norcross, GA
Posts: 388
Re: 58 GMC Project

Quote:
Originally Posted by CAL 58 GMC View Post
No plans for me right now. I'm going to be helping out a friend finish up his 55 Bel Air. He's bring over to my house this weekend so that's going to should keep me bussy. When his car gets here I'll post a few pics.

Cal, what ya SHOULD do is make us another cool video. One with stops and starts and turns and fly bys! Hahaha. C'mon hook us up!
Blitz is offline   Reply With Quote
Old 02-20-2009, 11:39 AM   #1314
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Quote:
Originally Posted by b00sted View Post
What a build and what a truck... just a WOW from me...
Thanks man!!!
CAL 58 GMC is offline   Reply With Quote
Old 02-20-2009, 11:42 AM   #1315
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Quote:
Originally Posted by Blitz View Post
Cal, what ya SHOULD do is make us another cool video. One with stops and starts and turns and fly bys! Hahaha. C'mon hook us up!
I just might do that.
CAL 58 GMC is offline   Reply With Quote
Old 02-20-2009, 07:03 PM   #1316
Blitz
Mr. Thread Killer
 
Join Date: Dec 2008
Location: Norcross, GA
Posts: 388
Re: 58 GMC Project

Cool, can't wait!!
Blitz is offline   Reply With Quote
Old 03-20-2009, 11:28 PM   #1317
hoosierred2000
Registered User
 
Join Date: Mar 2009
Location: New Albany, IN
Posts: 1
Re: 58 GMC Project

Your truck is looking awsome!!
I do need to ask, thouigh...what's the chance you still have the original engine? I need a '58 gmc v8
thx
hoosierred2000 is offline   Reply With Quote
Old 03-21-2009, 06:43 PM   #1318
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Quote:
Originally Posted by hoosierred2000 View Post
Your truck is looking awsome!!
I do need to ask, thouigh...what's the chance you still have the original engine? I need a '58 gmc v8
thx
Sorry, my truck was completly gutted out when I bought it.
CAL 58 GMC is offline   Reply With Quote
Old 03-21-2009, 06:57 PM   #1319
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Okay, so some of you might remember last summer I was trying to head down to so cal for Brothers truck show and well, I didn’t make it since the truck I was using was under sized and under powered and started to over heat. So I sold my F-150 and bought a F-250, yeah I know it's a Ford, but Ford's sell cheap out here on the west coast since everyone out here what's a Chevy. Anyway I picked up the F-250 with a 460 big block for $1,700 with 86k org. miles on it. So this weekend I pulled my truck down to an invitational indoor car show. The F-250 pulled my truck and trailer with no problem and almost like there was not a trailer behind me. Any way here's a pic of my new tow vehicle getting r4eady to leave with the 58 behind me. I will take a few shots of the 58 at the show and post them.
Attached Images
  

Last edited by CAL 58 GMC; 03-21-2009 at 07:02 PM.
CAL 58 GMC is offline   Reply With Quote
Old 03-21-2009, 07:17 PM   #1320
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: 58 GMC Project

Very cool.
Are you gonna make the Brothers show this year?
Kim
Kim57 is offline   Reply With Quote
Old 03-22-2009, 11:20 PM   #1321
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

Quote:
Originally Posted by Kim57 View Post
Very cool.
Are you gonna make the Brothers show this year?
Kim
I'm going to try again if my job does not keep me away.
CAL 58 GMC is offline   Reply With Quote
Old 03-22-2009, 11:23 PM   #1322
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 58 GMC Project

So here's were I pulled my 58 to this weekend. It was a three day indoor car show. Here's a pic.
Attached Images
 

Last edited by CAL 58 GMC; 03-22-2009 at 11:24 PM.
CAL 58 GMC is offline   Reply With Quote
Old 03-23-2009, 01:27 AM   #1323
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 58 GMC Project

Your truck looks nicer and nicer everytime i look at it. That is some car show there, on the astro turf? was it any good, up here we only have a couple of good shows a year, sure wish we had what you guys have down there. oh well. Hope you enjoyed the show and walked away with some extra "bling" Later. James
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 03-23-2009, 03:05 PM   #1324
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: 58 GMC Project

The truck looks amazing and I hope to see you at the Brothers Truck Show this year.
Kabwe is offline   Reply With Quote
Old 03-24-2009, 08:40 AM   #1325
stan3018
Registered User
 
Join Date: Feb 2009
Location: bronx ny
Posts: 167
Re: 58 GMC Project

cal 58 you have the best truck....:metal
stan3018 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com