Coil Springs BBC vs. SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 01-19-2009, 05:13 PM

OK heres the deal, I have recently completed my rolling chassis for my 72 Cheyenne Super project. I bought everything needed from ECE, and the quality was perfect. I originally thought about doing a gen. 3 swap so I bought the small block coils. I am now thinking about building my 402 BBC. My question is, is anyone running a BBC with SBC coils. Will it cause any problems? I assume about 1 1/2 inches lower but anything else I should look out for? Thanks in advance.

**GSFMECH** · 01-19-2009, 07:23 PM

I used a ECE 4/6 drop kit on my truck and had a 350 in it at the the time. I swapped it for a 454 and it has not caused me any problem. It did sit lower with the big block but hard to say how much (maybe an inch). I never measured it. Pics are in my build thread.

01-19-2009, 05:13 PM	#1
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Coil Springs BBC vs. SBC OK heres the deal, I have recently completed my rolling chassis for my 72 Cheyenne Super project. I bought everything needed from ECE, and the quality was perfect. I originally thought about doing a gen. 3 swap so I bought the small block coils. I am now thinking about building my 402 BBC. My question is, is anyone running a BBC with SBC coils. Will it cause any problems? I assume about 1 1/2 inches lower but anything else I should look out for? Thanks in advance. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-19-2009, 07:23 PM	#2
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 816	Re: Coil Springs BBC vs. SBC I used a ECE 4/6 drop kit on my truck and had a 350 in it at the the time. I swapped it for a 454 and it has not caused me any problem. It did sit lower with the big block but hard to say how much (maybe an inch). I never measured it. Pics are in my build thread. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.