LSX Guys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LuckyHenriksen · 01-21-2009, 10:37 PM

What does this do? (the tubes)

**Hart_Rod** · 01-21-2009, 10:40 PM

Oil cooler........

.

Hipper · 01-21-2009, 10:43 PM

Its the lines to the oil cooler in the radiator. You should be able to plug them or cut them off and have them welded shut at the aluminum block if you dont want to run a cooler. They only run part of the oil thru the cooler not all of it, or you can just run a cooler

**LEEVON** · 01-21-2009, 10:44 PM

remote/auxillary oil filter/cooler thingy? Sorry, hope the real LSX guys see this!

pcmcobra · 01-21-2009, 10:46 PM

what rob said, goes to oil cooler. I just went and bought a blockoff plate from gm and did away with the cooler/tubes.

LuckyHenriksen · 01-21-2009, 10:53 PM

Ok sweet, I am going to try and find a block off plate. Have a part number by chance?

LuckyHenriksen · 01-21-2009, 10:54 PM

Oh and thanks for the quick responses guys

**Hart_Rod** · 01-21-2009, 11:14 PM

Quote:

Originally Posted by LuckyHenriksen

Ok sweet, I am going to try and find a block off plate. Have a part number by chance?

I think this is it......

tphsmith · 01-21-2009, 11:17 PM

HartRob are you using the block plate?

**Hart_Rod** · 01-21-2009, 11:27 PM

Quote:

Originally Posted by tphsmith

HartRob are you using the block plate?

I've got a truck motor and it came on the pan.

LuckyHenriksen · 01-22-2009, 12:25 AM

Rob is that an actual plate or just the bolts stuffed back in there?

**Hart_Rod** · 01-22-2009, 12:51 AM

Quote:

Originally Posted by LuckyHenriksen

Rob is that an actual plate or just the bolts stuffed back in there?

It's the plate that was on the pan when I got it. I think there are some different versions of it. I don't see why you can't take a piece of 1/4" aluminum and make your own block-off.

LuckyHenriksen · 01-22-2009, 01:02 AM

Hmmm. I would love to make my own but lack the machinery to do so. I will look into a GM part

Larry S · 01-22-2009, 07:43 AM

I used 2 plugs and some rectorseal, cost about $2.00, and have done it on a couple of engines with no problems.

01-21-2009, 10:37 PM	#1
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	LSX Guys What does this do? (the tubes) __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-21-2009, 10:40 PM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: LSX Guys Oil cooler......... __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-21-2009, 10:43 PM	#3
Hipper Registered User Join Date: Feb 2007 Location: Kansas Posts: 148	Re: LSX Guys Its the lines to the oil cooler in the radiator. You should be able to plug them or cut them off and have them welded shut at the aluminum block if you dont want to run a cooler. They only run part of the oil thru the cooler not all of it, or you can just run a cooler __________________ 71 GMC Long Bed, 454,factory everything, lowered, and shaved. 64 GMC Short Bed (great grandfathers truck) 65 Chevy 1 ton Dually a/c p/s p/b v8 auto 89 Jeep Cherokee 3" lift 79 MG Midget (My 7 year old vehicle) 29 Ford Model A Rat Rod (in the works) 86 pontiac fiero 2.5 manual18 year olds) 87 pontiac fiero SE 2.8 auto (18 year olds) 90 Mitsubishi eclipes turbo AWD (18 year olds) 69 BMW 1600 (wifes toy)

01-21-2009, 10:44 PM	#4
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: LSX Guys remote/auxillary oil filter/cooler thingy? Sorry, hope the real LSX guys see this! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids Last edited by LEEVON; 01-21-2009 at 10:45 PM.

01-21-2009, 10:46 PM	#5
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: LSX Guys what rob said, goes to oil cooler. I just went and bought a blockoff plate from gm and did away with the cooler/tubes. __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

01-21-2009, 10:53 PM	#6
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: LSX Guys Ok sweet, I am going to try and find a block off plate. Have a part number by chance? __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-21-2009, 10:54 PM	#7
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: LSX Guys Oh and thanks for the quick responses guys __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-21-2009, 11:17 PM	#9
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: LSX Guys HartRob are you using the block plate? __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

01-22-2009, 12:25 AM	#11
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: LSX Guys Rob is that an actual plate or just the bolts stuffed back in there? __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-22-2009, 01:02 AM	#13
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: LSX Guys Hmmm. I would love to make my own but lack the machinery to do so. I will look into a GM part __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-22-2009, 07:43 AM	#14
Larry S Registered User Join Date: Sep 2008 Location: Gainesville Ga Posts: 210	Re: LSX Guys I used 2 plugs and some rectorseal, cost about $2.00, and have done it on a couple of engines with no problems.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.