Where to buy a complete floor pan assy. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Prostreet 72 · 01-30-2009, 11:13 AM

Besides LMC, where else have people bought the complete floor pan assemblies from? LMC is at $500. for the pan.

Chris

**rob32472** · 01-30-2009, 12:09 PM

tripro automotive

Prostreet 72 · 01-30-2009, 05:28 PM

Quote:

Originally Posted by rob32472

tripro automotive

It looks like they are $50.00 higher than LMC. LMC is $500 shipped.

PanelDeland · 01-30-2009, 06:47 PM

Check with some of the BB vendors.They probably have competetive pricing and may be close enough to save you shipping.They are heavy so shipping is probably going to cost you almost as much as the pan.

msgross · 01-30-2009, 06:58 PM

Is that the floor pan with or without supports on the bottom. Be careful because I have seen them both ways...

I suggest that you PM one of the board members, Tri-Pro automotive, Tim Christian, GMCPAul etc... and see what they can do for you.

mbgmike · 01-30-2009, 07:05 PM

You can go to Zeeland Mi to the Truck and Van Specialties. They sell them and go pick one up at their store

We sell them but truck shipping is expensive. We sell them both with or without braces. We sell the ones without for $259.00 one of the lowest prices in the country for the same part

Prostreet 72 · 01-31-2009, 10:44 AM

Quote:

Originally Posted by mbgmike

You can go to Zeeland Mi to the Truck and Van Specialties. They sell them and go pick one up at their store

We sell them but truck shipping is expensive. We sell them both with or without braces. We sell the ones without for $259.00 one of the lowest prices in the country for the same part

Zeeland dose not have them released yet. Can anyone else help me out with a better price then LMC? I need it with the braces.

Chris

mbgmike · 01-31-2009, 11:12 AM

We sell the ones with braces for $399.00. I am surprised that the place in Zeeland does not. They buy from the same places we do. If you can get one from LMC for $500 shipped thats a good price. You looking at an easy $150.00 for shipping.

mbgmike · 01-31-2009, 02:04 PM

Quote:

Originally Posted by Prostreet 72

Zeeland dose not have them released yet. Can anyone else help me out with a better price then LMC? I need it with the braces.

Chris

I just talked to Gus at CARS Inc in Michigan and they have the ones with braces and you can pick one up. They are just at $400.00 plus the 6% sales tax. They are about one hr from you.
CARS Inc.
2600 Bond Street
Rochester Hills, MI 48309
1-248-853-8900
FAX 1-248-853-8919
webmaster@carsinc.com

msgross · 01-31-2009, 02:19 PM

that's awesome to see another board vendor helping out like this... rep points for mbgmike...

jb4short · 01-31-2009, 04:56 PM

Go to PA and BEAT one out of MSGROSS.....LOL

FREEBIE!

BTW....there's several build threads to help you with the installation of these. You're going to have a much better deal when done vs. patching.

msgross · 01-31-2009, 05:20 PM

Quote:

Originally Posted by Tri-ProAutomotive

Go to PA and BEAT one out of MSGROSS.....LOL

FREEBIE!

Come from a former Navy guy i'm not sure how to take that!

Don't get the poor guy hurt Jon! I am a lightweight ya know...

back on track now... this is the best way to fix a FUBAR floor.

01-30-2009, 11:13 AM	#1
Prostreet 72 Prostreet 72 Join Date: Oct 2008 Location: Goodrich, Michigan Posts: 278	Where to buy a complete floor pan assy. Besides LMC, where else have people bought the complete floor pan assemblies from? LMC is at $500. for the pan. Chris

01-30-2009, 12:09 PM	#2
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: Where to buy a complete floor pan assy. tripro automotive

01-30-2009, 06:47 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Where to buy a complete floor pan assy. Check with some of the BB vendors.They probably have competetive pricing and may be close enough to save you shipping.They are heavy so shipping is probably going to cost you almost as much as the pan. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-30-2009, 06:58 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Where to buy a complete floor pan assy. Is that the floor pan with or without supports on the bottom. Be careful because I have seen them both ways... I suggest that you PM one of the board members, Tri-Pro automotive, Tim Christian, GMCPAul etc... and see what they can do for you. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-30-2009, 07:05 PM	#6
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Where to buy a complete floor pan assy. You can go to Zeeland Mi to the Truck and Van Specialties. They sell them and go pick one up at their store We sell them but truck shipping is expensive. We sell them both with or without braces. We sell the ones without for $259.00 one of the lowest prices in the country for the same part

01-31-2009, 11:12 AM	#8
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Where to buy a complete floor pan assy. We sell the ones with braces for $399.00. I am surprised that the place in Zeeland does not. They buy from the same places we do. If you can get one from LMC for $500 shipped thats a good price. You looking at an easy $150.00 for shipping.

01-31-2009, 02:19 PM	#10
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Where to buy a complete floor pan assy. that's awesome to see another board vendor helping out like this... rep points for mbgmike... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-31-2009, 04:56 PM	#11
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Where to buy a complete floor pan assy. Go to PA and BEAT one out of MSGROSS.....LOL FREEBIE! BTW....there's several build threads to help you with the installation of these. You're going to have a much better deal when done vs. patching.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.