Quick control arm question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

koolky · 01-31-2009, 03:06 PM

Is it the upper or lower control arms from a 3/4 ton the same as 1/2 ton? Thanks

crazy longhorn · 01-31-2009, 03:47 PM

the uppers are the same(just swap the ball joints). The lowers have a different sized hole for the ball joint ,1/2 vs 3/4 ton. crazyL

01-31-2009, 03:06 PM	#1
koolky 67-72 Addicted Join Date: Oct 2007 Location: Guelph Ontario Posts: 256	Quick control arm question Is it the upper or lower control arms from a 3/4 ton the same as 1/2 ton? Thanks

01-31-2009, 03:47 PM	#2
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: Quick control arm question the uppers are the same(just swap the ball joints). The lowers have a different sized hole for the ball joint ,1/2 vs 3/4 ton. crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....



Register or Log In To remove these advertisements.