|
02-04-2009, 04:30 PM
|
#1 |
|
Registered User
Join Date: Jan 2009
Location: Queen Creek Arizona
Posts: 56
|
Getting the Shaft
I am building a 67 short bed using a 72 short bed frame and a 67 cab and front clip, the 67 has a home grown 327 and a turbo 350, the donor frame has a latter model rear end (based on the fact that someone moved one of the shock mounts from the back of the tube to the front) (maybe 73) anyway would a 73 short bed drive shaft work or am I bound for a trip to the drive line shop.
|
|
|
|
02-04-2009, 06:18 PM
|
#2 |
|
Registered User
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
|
Re: Getting the Shaft
A good parts dealer can match/mis matched a universal u-joint with what you need. They are slightly more expensive about $22 sometimes they need to order it. All you need is correct length shaft.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" |
|
|
|
|
02-04-2009, 07:39 PM
|
#3 |
|
Registered User
Join Date: Mar 2008
Location: Lawrenceville, Ga
Posts: 300
|
Re: Getting the Shaft
I would think a Bastard joint would solve connecting the two.
About the length; I am not sure. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
