Our '66 Short Fleet Build - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Musclerodz · 02-21-2009, 12:26 AM

Quote:

Originally Posted by joe231

Hmmm, cool thanks for the info....guess I need to go to a paint supply. anyone you recommend?

go to B&H in Norman and tell them Mike Redpath sent you. They will probably feel sorry for you......

TimE · 02-21-2009, 12:39 AM

Awesome!! Glad you got it back-now let the fun commence!

Those reenactment pictures are downright scary. That would definitely have been a "pucker up" kind of moment.

protrash64 · 02-21-2009, 01:57 AM

Quote:

Originally Posted by TimE

Awesome!! Glad you got it back-now let the fun commence!

Those reenactment pictures are downright scary. That would definitely have been a "pucker up" kind of moment.

....no doubt!!!

Joe, if you havent been to a paint supply, get ready to be confused and then feel like

when youre trying to make a decision. The paint fumes are thick in the one I frequent.

The cab looks great, and LILRED stole my thunder, I was thinkin' 'the full monte'.....

collins10672 · 02-21-2009, 03:05 AM

joe your cab even though it has a little work ahead of it,man it looks great to be 45 yrs. old.i wish i had mine to that stage.i have a cousin that owns a body shop and they have always used a quality epoxy primer on freshly blasted metal.epoxy will seal the metal as well as the factory edp coating or better.he had blasted his frame on the 41 willy's coupe he owns and just worked on the car every now and then because the customers cars came first since he makes a living at it.to make a long story short he left his frame outside for 5 yrs. with only epoxy on it and it never rusted any and i saw this with my own eyes and always used it myself after that.it passed the test for me.

joe231 · 02-21-2009, 08:04 AM

Quote:

Originally Posted by Musclerodz

go to B&H in Norman and tell them Mike Redpath sent you. They will probably feel sorry for you......

thanks for all your help and info

Quote:

Originally Posted by TimE

Awesome!! Glad you got it back-now let the fun commence!

Those reenactment pictures are downright scary. That would definitely have been a "pucker up" kind of moment.

Quote:

Originally Posted by protrash64

....no doubt!!!

Joe, if you havent been to a paint supply, get ready to be confused and then feel like

when youre trying to make a decision. The paint fumes are thick in the one I frequent.

The cab looks great, and LILRED stole my thunder, I was thinkin' 'the full monte'.....

yeah I was trying to get a plan together before i went in...

Quote:

Originally Posted by collins10672

joe your cab even though it has a little work ahead of it,man it looks great to be 45 yrs. old.i wish i had mine to that stage.i have a cousin that owns a body shop and they have always used a quality epoxy primer on freshly blasted metal.epoxy will seal the metal as well as the factory edp coating or better.he had blasted his frame on the 41 willy's coupe he owns and just worked on the car every now and then because the customers cars came first since he makes a living at it.to make a long story short he left his frame outside for 5 yrs. with only epoxy on it and it never rusted any and i saw this with my own eyes and always used it myself after that.it passed the test for me.

thanks, we are excited

sounds like the way to go!!
thanks for the testimonial

**ChiefRocka** · 02-21-2009, 08:46 AM

Wow the cab came out super clean man !!! It's so nice to have a fresh canvas to start with....Looks like you have some work ahead of you !!

It's gonna be bad-arse when it's done !!

Alan's Classic · 02-21-2009, 09:44 AM

Joe, it's looking good. I used Dupont's DP 90 to cover bare metal.

**scotts62** · 02-21-2009, 11:46 AM

Heck yeah man looks good!

I knew there was a B&H on 39th, that's the one i use but didn't know there was one in Norman, that's cool.

4dranch · 02-21-2009, 03:13 PM

super nice Joe.
can't wait to see it roll across the bridge into Memphis in April for the .super chevy show

Musclerodz · 02-21-2009, 06:13 PM

Quote:

Originally Posted by scotts62

Heck yeah man looks good!

I knew there was a B&H on 39th, that's the one i use but didn't know there was one in Norman, that's cool.

The 39th store is another sub store. Home base is Reno and Blackwelder

jason65 · 02-22-2009, 01:04 AM

Cool pics. It's weld and grind time.

I bet your wife is excited.

joe231 · 02-22-2009, 02:10 AM

Quote:

Originally Posted by ChiefRocka

Wow the cab came out super clean man !!! It's so nice to have a fresh canvas to start with....Looks like you have some work ahead of you !!

It's gonna be bad-arse when it's done !!

lots of work, but i'm excited

Thanks!!

Quote:

Originally Posted by Alan's Classic

Joe, it's looking good. I used Dupont's DP 90 to cover bare metal.

that looks nice...i'm about convinced....kinda worried about the cost of it though....is it spendy?

Quote:

Originally Posted by scotts62

Heck yeah man looks good!

I knew there was a B&H on 39th, that's the one i use but didn't know there was one in Norman, that's cool.

thanks!

learn something new everyday, eh?

Quote:

Originally Posted by 4dranch

super nice Joe.
can't wait to see it roll across the bridge into Memphis in April for the .super chevy show

Hells Yeah!!!
wait....you are talking April 2010, right?

Quote:

Originally Posted by Musclerodz

The 39th store is another sub store. Home base is Reno and Blackwelder

Quote:

Originally Posted by jason65

Cool pics. It's weld and grind time.

I bet your wife is excited.

she is extremely excited! she can't wait to shoot it first though!!!

I just got back from KC a bit ago, long day.
went and met Tony(LILRED66)
he is a hell of a nice guy with LOTS of sweet OE parts.
I got the upper and lower radiator mounts and one of his upper radiator hard pipe kits, along with a BIG wish-list. I highly recommend him. He is very passionate about these trucks and will bend over backwards to make sure you are happy.
A big THUMBS UP to you Tony!!!
I will definitely be calling on ya for more stuff in the future!!

tomorrow is supposed to be nice, mid 60's and clear!
going to try to get the cab ready to haul out to Scott's family's shop in Tuttle to spray it.
got some seam sealer, weatherstrip adhesive, and tar like substance to remove first.

Thanks for all the positive comments!!!!

jason65 · 02-22-2009, 07:06 PM

Cool. Good progress for the 66.

kizer · 02-22-2009, 07:31 PM

Wow thats nice to see so clean and bare. Now I'm really jealous.

Your enactment really cracked me up. I wasn't sure what you where doing at first, but I figured it out. hahahaha

**scotts62** · 02-22-2009, 09:32 PM

Yeah no kidding! If i was behind him on that off ramp i would have been thinking wohoo im going to get a new truck!

danzka4u · 02-22-2009, 09:40 PM

Looks great thats how I lowerd mine wrangler coils in the back and cut the front

joe231 · 02-22-2009, 10:09 PM

Quote:

Originally Posted by jason65

Cool. Good progress for the 66.

thanks!!

Quote:

Originally Posted by kizer

Wow thats nice to see so clean and bare. Now I'm really jealous.

Your enactment really cracked me up. I wasn't sure what you where doing at first, but I figured it out. hahahaha

Quote:

Originally Posted by scotts62

Yeah no kidding! If i was behind him on that off ramp i would have been thinking wohoo im going to get a new truck!

Quote:

Originally Posted by danzka4u

Looks great thats how I lowerd mine wrangler coils in the back and cut the front

yeah man, I saw your truck when i was researching the coils, love your truck!
looks like you use it too, huh?

Alan's Classic · 02-22-2009, 10:41 PM

Dupont's DP90 is pricey but does go along way. Omni has something similiar and I have used it and haven't had a problem. I don't know the cost, a buddy had some left over from a project he did.

protrash64 · 02-22-2009, 10:41 PM

What did you pick up for seam sealer, Joe???

joe231 · 02-22-2009, 10:45 PM

Quote:

Originally Posted by Alan's Classic

Dupont's DP90 is pricey but does go along way. Omni has something similiar and I have used it and haven't had a problem. I don't know the cost, a buddy had some left over from a project he did.

so i wonder how much i'll need for the cab? 2 quarts or less?

Quote:

Originally Posted by protrash64

What did you pick up for seam sealer, Joe???

nothing yet....this is all new to me....trial by fire

seam seal after DP90????
but guess i need to wait until after the repairs also, huh?

protrash64 · 02-22-2009, 10:56 PM

Up in your post you mentioned it; its been years since primering mine and I couldnt remember what I used. I think it would go on after dp90....Alan probably knows for sure. Take some pics of you and Scott beatin; on that cab!!!

Alan's Classic · 02-22-2009, 11:04 PM

One quart is all you need. I sprayed all of my stuff and still haven't used a quart. I only put one good medium/wet coat on. I don't have the can with me or I'd tell you what they recommend. Seam sealer goes on over primer.

joe231 · 02-22-2009, 11:06 PM

will do Jeff, the wife is going to shoot it, she loves to paint

I got all the old seam sealer out today...there is some stuff under the dash that acts, looks and smells just like rubber when I was using wire wheel on it....it is some tough crud, might have to try some thinner on it..

*LILRED66* · 02-22-2009, 11:30 PM

Joe:

Thanks for bringing your wife and boys up to see me in Kansas City. You guys probably thought I was going to keep you there all day and night talking about 4-5-6 Chevy trucks. I hope you made it home safely and thanks again for your kind words and your business.

Don't forget to have Megan sign up as a member, so she can contribute during the big build. Take care and let me know if your boys need a truck to drive at the OK function this summer.

Let the fun begin.

TimE · 02-22-2009, 11:48 PM

Quote:

Originally Posted by protrash64

Take some pics of you and Scott beatin; on that cab!!!

Yea, I wanna see some of those too!

Glad things are going your way Joe.

02-21-2009, 12:39 AM	#502
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: Our '66 Short Fleet Build Awesome!! Glad you got it back-now let the fun commence! Those reenactment pictures are downright scary. That would definitely have been a "pucker up" kind of moment. __________________ Just hopin' I live long enough to finish something!!!

02-21-2009, 03:05 AM	#504
collins10672 Registered User Join Date: Jan 2009 Location: bean station tennessee Posts: 398	Re: Our '66 Short Fleet Build joe your cab even though it has a little work ahead of it,man it looks great to be 45 yrs. old.i wish i had mine to that stage.i have a cousin that owns a body shop and they have always used a quality epoxy primer on freshly blasted metal.epoxy will seal the metal as well as the factory edp coating or better.he had blasted his frame on the 41 willy's coupe he owns and just worked on the car every now and then because the customers cars came first since he makes a living at it.to make a long story short he left his frame outside for 5 yrs. with only epoxy on it and it never rusted any and i saw this with my own eyes and always used it myself after that.it passed the test for me.

02-21-2009, 08:46 AM	#506
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Our '66 Short Fleet Build Wow the cab came out super clean man !!! It's so nice to have a fresh canvas to start with....Looks like you have some work ahead of you !! It's gonna be bad-arse when it's done !! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

02-21-2009, 09:44 AM	#507
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Our '66 Short Fleet Build Joe, it's looking good. I used Dupont's DP 90 to cover bare metal. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

02-21-2009, 11:46 AM	#508
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Our '66 Short Fleet Build Heck yeah man looks good! I knew there was a B&H on 39th, that's the one i use but didn't know there was one in Norman, that's cool. __________________ Scott 93 crew cab build Project 62

02-21-2009, 03:13 PM	#509
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Our '66 Short Fleet Build super nice Joe. can't wait to see it roll across the bridge into Memphis in April for the .super chevy show __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

02-22-2009, 01:04 AM	#511
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Our '66 Short Fleet Build Cool pics. It's weld and grind time. I bet your wife is excited.

02-22-2009, 07:06 PM	#513
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Our '66 Short Fleet Build Cool. Good progress for the 66.

02-22-2009, 07:31 PM	#514
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: Our '66 Short Fleet Build Wow thats nice to see so clean and bare. Now I'm really jealous. Your enactment really cracked me up. I wasn't sure what you where doing at first, but I figured it out. hahahaha __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

02-22-2009, 09:32 PM	#515
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Our '66 Short Fleet Build Yeah no kidding! If i was behind him on that off ramp i would have been thinking wohoo im going to get a new truck! __________________ Scott 93 crew cab build Project 62

02-22-2009, 09:40 PM	#516
danzka4u Registered User Join Date: Oct 2007 Location: lompoc ca Posts: 17	Re: Our '66 Short Fleet Build Looks great thats how I lowerd mine wrangler coils in the back and cut the front Attached Images

02-22-2009, 10:41 PM	#518
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Our '66 Short Fleet Build Dupont's DP90 is pricey but does go along way. Omni has something similiar and I have used it and haven't had a problem. I don't know the cost, a buddy had some left over from a project he did. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

02-22-2009, 10:41 PM	#519
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Our '66 Short Fleet Build What did you pick up for seam sealer, Joe??? __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-22-2009, 10:56 PM	#521
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Our '66 Short Fleet Build Up in your post you mentioned it; its been years since primering mine and I couldnt remember what I used. I think it would go on after dp90....Alan probably knows for sure. Take some pics of you and Scott beatin; on that cab!!! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-22-2009, 11:04 PM	#522
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Our '66 Short Fleet Build One quart is all you need. I sprayed all of my stuff and still haven't used a quart. I only put one good medium/wet coat on. I don't have the can with me or I'd tell you what they recommend. Seam sealer goes on over primer. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"



Register or Log In To remove these advertisements.

02-22-2009, 11:06 PM	#523
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build will do Jeff, the wife is going to shoot it, she loves to paint I got all the old seam sealer out today...there is some stuff under the dash that acts, looks and smells just like rubber when I was using wire wheel on it....it is some tough crud, might have to try some thinner on it.. __________________ *CHEVY ONLY*

02-22-2009, 11:30 PM	#524
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Our '66 Short Fleet Build Joe: Thanks for bringing your wife and boys up to see me in Kansas City. You guys probably thought I was going to keep you there all day and night talking about 4-5-6 Chevy trucks. I hope you made it home safely and thanks again for your kind words and your business. Don't forget to have Megan sign up as a member, so she can contribute during the big build. Take care and let me know if your boys need a truck to drive at the OK function this summer. Let the fun begin.

Register or Log In To remove these advertisements.