Lug nuts............. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84 400 · 03-05-2009, 04:54 PM

Where do you guys get yours. My 77 has those P.O.S. chromed capped ones that you can never get off. and make the clickity clack racket. I am to find some at a good price that are good quality. I tired the ones from Autozone on the 84 but they don't hold up like I had hoped and use the dumb locking lug that does not even fit...

This is gonna be on the 4x4 so six per wheel. Maybe an ebay seller?

Thanks

Jonboy · 03-05-2009, 05:39 PM

Check a tire shop. They usually buy them in bulk, so they are cheaper.

f.monroe · 03-05-2009, 08:48 PM

My opinion is that there is only one lug manufacturer to use . McGard . Summit racing sells install kits with 16 lugs and 4 locks for like $40 . They are heavy and will not rust . Nice lugs .
Frank

fast75 · 03-05-2009, 09:58 PM

Quote:

Originally Posted by f.monroe

My opinion is that there is only one lug manufacturer to use . McGard . Summit racing sells install kits with 16 lugs and 4 locks for like $40 . They are heavy and will not rust . Nice lugs .
Frank

x2

*78 Chevyrado* · 03-05-2009, 11:09 PM

If you get a wheel lock set make sure anybody (ie tire shop) that will remove your wheels know to NEVER use an impact gun on the key for the lock. Back when I had my buick it had the wheels with the lugs way down in the hole and they used a gun on the lock and ruined it. they had to break cut the wheel off to fix it. They did get me a new wheel free but still that took 2 days to fix.

**old Rusty C10** · 03-06-2009, 12:32 AM

i got mine at a wheel shop and never had a problem

84 400 · 03-17-2009, 09:56 PM

Can anybody tell me the size of these nuts? it is on a 6 lug 1/2ton 4x4

f.monroe · 03-17-2009, 10:55 PM

I am pretty sure the 70's and 80's 6 lug 4x4's are 7/16-20 thread . I am sure someone who owns one will be able to confirm this or give you the correct info . You can also call Summit Racing and they have a tech line that should be ableto answer the question based on year , make , model , etc .
Frank

03-05-2009, 04:54 PM	#1
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Lug nuts............. Where do you guys get yours. My 77 has those P.O.S. chromed capped ones that you can never get off. and make the clickity clack racket. I am to find some at a good price that are good quality. I tired the ones from Autozone on the 84 but they don't hold up like I had hoped and use the dumb locking lug that does not even fit... This is gonna be on the 4x4 so six per wheel. Maybe an ebay seller? Thanks __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

03-05-2009, 05:39 PM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Lug nuts............. Check a tire shop. They usually buy them in bulk, so they are cheaper.

03-05-2009, 08:48 PM	#3
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Lug nuts............. My opinion is that there is only one lug manufacturer to use . McGard . Summit racing sells install kits with 16 lugs and 4 locks for like $40 . They are heavy and will not rust . Nice lugs . Frank __________________ Born and proudly residing in a Red State !

03-05-2009, 11:09 PM	#5
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: Lug nuts............. If you get a wheel lock set make sure anybody (ie tire shop) that will remove your wheels know to NEVER use an impact gun on the key for the lock. Back when I had my buick it had the wheels with the lugs way down in the hole and they used a gun on the lock and ruined it. they had to break cut the wheel off to fix it. They did get me a new wheel free but still that took 2 days to fix.

03-06-2009, 12:32 AM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Lug nuts............. i got mine at a wheel shop and never had a problem __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-17-2009, 09:56 PM	#7
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: Lug nuts............. Can anybody tell me the size of these nuts? it is on a 6 lug 1/2ton 4x4 __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

03-17-2009, 10:55 PM	#8
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Lug nuts............. I am pretty sure the 70's and 80's 6 lug 4x4's are 7/16-20 thread . I am sure someone who owns one will be able to confirm this or give you the correct info . You can also call Summit Racing and they have a tech line that should be ableto answer the question based on year , make , model , etc . Frank __________________ Born and proudly residing in a Red State !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.